Top Sellers
F8B-9 Direct Bolt-On Engine Cooling Pump, Detroit Diesel OEM from JOHNSON PUMPS
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
|
Ultima Electronic Bilge Switch from JOHNSON PUMPS
The same switch that comes preinstalled on Johnson Ultima Combo Automatic Bilge Pumps. With no moving parts and totally sealed solid state electronics, this mercuryfree switch never corrodes or jams on debris. Activates/deactivates at 2" and 3/4" fluid levels. A three second delay prevents false starts. Rated to handle pumps up to 20 amps at 12V or 24V DC. Activation Method: Solid-state electronic . Dimensions: 2-3/8"H x 2-11/16"L x 1-1/8"D .
|
13-1/4" x 17" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
|
12-1/4" x 15" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
|
10" x 13" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
|
Impeller 09-812B - For pump size F6B from JOHNSON PUMPS
More durable, longer lasting replacement pump has a one-piece bronze body and bronze end-plate with a replaceable cam and wear-plate so it can be rebuilt when needed.
|
Impeller article number 09-821B from JOHNSON PUMP
Impeller-Fuel Transfer Nitrile|Impeller-Fuel Transfer Nitrile.
|
Bilge Pro Replacement Motor Cartridge for 500gph Pumps from JOHNSON PUMP
In the event of a problem, replacing your cartridge bilge pump motor is easy— provided you keep one of these on hand. Just pop out the old cartridge and pop in the new. Fit Johnson, West Marine Bilge Pro and Mayfair cartridge-style bilge and livewell pumps.
|
|
|
Small Boat Clevis Pin Kit from JOHNSON, C.S.
Assorted sizes of stainless-steel clevis and cotter pins. Small Boat kit contains 46 pieces ranging from 3/16"–5/16".
|
Anchor Chain Tensioner from JOHNSON, C.S.
Holds chain up to 5/16" firmly to keep your anchor quiet on its roller. A quick-release pin holds the welded handle securely in a tensioned position. 316 stainless steel.
|
Soy Shaker from JOHNSON PUMPS
PRP SpillBuster Soy is a unique 100% natural and biodegradable oil spill cleanup tool. It absorbs petroleum hydrocarbons, floats with the contamination on the surface and stimulates indigenous microbes to biodegrade the oil (and itself) into CO2 and water. PRP can be used to remediate contaminated soil as well. Simply sprinkle the PRP powder on the contaminated area and watch it disappear. No residue remains! Coverage: 100sq/ft per lb. at 1/16" thick.
|
Power Pack - Johnson/Evinrude -18-5758 from SIERRA
Replacement part for Johnson/Evinrude Outboard #582453, 583380 OEM #0582452.
|
Pelican Hook Repair Kit from JOHNSON, C.S.
Repair snap gates for safetyRepair kit for lost or worn latching mechanisms on snap gate hooks.
|
Pair of Wrap Pins for 1/4" Turnbuckle from C SHERMAN JOHNSON
Wrap pins are Velcro locking devices used to secure turnbuckles without having to bend over the end of the cotter pins.
|
|
C, from JOHNSON, S, 16IN from JOHNSON, 16"L from JOHNSON, L from JOHNSON
|
|
Home -> Cordage -> Rigging Products->Terminal Locking Nuts
For check nut locking turnbuckles.
Part No: 35-608-1
|
|
|
|
Home -> Sailboat -> Rigging Products->Aircraft Swage Eyes
Used like marine eyes, but thinner across to fit in narrow forks.
Part No: 12-213
|
|
|
|
Home -> Cordage -> Rigging Products->Splice Lines Lifeline Fittings
Popular Johnson lifeline fittings are now available with eye ends for today's high-tech low stretch line. Recommended for use with 1/4" Amsteel or similar single braid, which weighs one seventh as much as 1/4" 1x19 cable and costs about the same amount. Johnson advises replacing the line at three year intervals. . Professional splicing recommended.
Part No: LS-1900
|
|
|
|
Home -> Sailboat -> Rigging Products->Single Swivel Gate Eyes
Rotating design eliminates twisted wires.
Part No: 22-311
|
|
|
|
Home -> Cordage -> Rigging Products->Conversion Sleeves
Thin sleeves allow you to use 3/16" lifeline terminals on 1/8" wire without loss of strength.
Part No: 36-610
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Aircraft Swage Eyes
Used like marine eyes, but thinner across to fit in narrow forks.
Part No: 12-214
|
|
|
|
|
Home -> Cordage -> Rigging Products->Terminal Locking Nuts
For check nut locking turnbuckles.
Part No: 35-604-1
|
|
|
|
Home -> Cordage -> Rigging Products->Single Gate Eyes
The eye on the standing part of the lifeline wire also prevents the lifelines from going slack when the gate is open.
Part No: 31-605
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Turnbuckle Bodies
Chrome-plated bronze.
Part No: 34-611
|
|
|
|
Home -> Sailboat -> Rigging Products->T-Bolts with Toggle
316 stainless steel with left hand threads. Length is measured from bottom of cotter hole to center of clevis pin.
Part No: 33-620
|
|
|
|
Home -> Sailboat -> Rigging Products->Aircraft Swage Forks
Aircraft forks connect to tangs or aircraft eyes.
Part No: 12-225
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Aircraft Swage Eyes
Used like marine eyes, but thinner across to fit in narrow forks.
Part No: 12-215
|
|
|
|
Home -> Cordage -> Rigging Products->Swage Studs
The “wire end” of the turnbuckle generally uses right hand (RH) threads, and the “deck end” uses left hand (LH) threads.
Part No: 32-626
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Aircraft Swage Forks
Aircraft forks connect to tangs or aircraft eyes.
Part No: 12-224
|
|
|
|
|
Home -> Cordage -> Rigging Products->Terminal Locking Nuts
For check nut locking turnbuckles.
Part No: 35-606-1
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs -> Flag Accessories
Spreader Halyard Kit This kit provides everything you need to add a flag halyard to your boat. Includes: 40' of 3/16"diameter polyester line . Block with bail.
Part No: 40-530
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Stanchion Terminals
Used where the cable needs to be terminated at the stanchion.
Part No: 25-306-5F
|
|
|
|
Home -> Cordage -> Rigging Products->Tubular-Body, Stainless-Steel Turnbuckles
Series 03 and 04 include LH upper terminals (unless designated RH).
Part No: 06-118
|
|
|
|
|
Home -> Cordage -> Rigging Products->Terminal Locking Nuts
For check nut locking turnbuckles.
Part No: 35-601-1
|
|
|
|
|
Home -> Cordage -> Rigging Products->Swage Studs
The “wire end” of the turnbuckle generally uses right hand (RH) threads, and the “deck end” uses left hand (LH) threads.
Part No: 32-630
|
|
|
|
Home -> Cordage -> Rigging Products->Lifeline Adjusters
Take up slack at a gate, or at the end of a long run.
Part No: 27-406
|
|
|
|
|
Home -> Cordage -> Rigging Products->Lifeline Adjusters
Take up slack at a gate, or at the end of a long run.
Part No: 31-606
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Spinnaker Pole Stanchion Mounts
This spinnaker pole stanchion mount makes storage and quick retrieval simple. One end of the pole is slid through the vinyl coated wire loop of the aft holder. The front end of your pole is securely snapped onto the bail of the forward holder. Available in three sizes based on pole diameter.
Part No: 40-557
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps
Molded plastic tread fits 1" round stainless ladder rungs to provide a secure place to plant your feet.
Part No: 48-560
|
|
|
|
Home -> Sailboat -> Rigging Products->Toggle Jaws
Can accept some off-axis alignment due to the toggle and clevis pin.
Part No: 25-304
|
|
|
|
Home -> Sailboat -> Rigging Products->Pelican Hooks. Tubular
Traditionally styled pelican hooks with a hinged lock mechanism for security Cannot be accidentally released. Locks closed with a cotter pin for racing or offshore sailing. Takeup range: 1".
Part No: 21-306
|
|
|
|
|
Home -> Cordage -> Rigging Products->Single Gate Eyes
The eye on the standing part of the lifeline wire also prevents the lifelines from going slack when the gate is open.
Part No: 22-303
|
|
|
|
Home -> Sailboat -> Rigging Products->Interlocking Gate Eyes
A universal hinge for gate opening, the eye on the standing part of the lifeline wire prevents the lifelines from going slack when the gate is open.
Part No: 27-408
|
|
|
|
|
Home -> Cordage -> Rigging Products->Swage Studs
The “wire end” of the turnbuckle generally uses right hand (RH) threads, and the “deck end” uses left hand (LH) threads.
Part No: 32-621
|
|
|
|
Home -> Sailboat -> Rigging Products->Backstay Turnbuckles, Jaw and Jaw
Feature dual handles for quick adjustment. Upper handle locks the turnbuckle when closed. Length closed: 15". Length open: 21". Thread size: 5/8-18. Bronze rods eliminate any tendency for galling with the stainless steel body.
Part No: 46-500-1
|
|
|
