Top Sellers
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
|
ARS-5 Advanced Regulator from BALMAR
Simply select one of five preset program choices based on battery type, and the belt size setting that matches your alternator’s drive belt width and alternator output rating. Battery settings include standard and deep-cycle flooded, gel, AGM, and Optima programs. When used with MC-TS-A and MC-TS-B alternator and battery temperature sensors, the ARS-5 ensures even greater charging performance, as well as critical protection for your alternator and batteries. Controls a single alternator only.
|
Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Mount on doors, bulkheads, in the cockpit and on hatch boards. Helps to eliminate mildew. . Pre-drilled for six #8 screws. . Mfr. 's lifetime limited warranty. . Ship 0. 5 lbs.
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
5"-6" Bonnet Set from WMH TOOL GROUP
For final buff out, use the wool polishing bonnet included in this Seven Piece Bonnet Set which includes four applicators, two terry cloth, one wool and one microfiber polishing bonnet.
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
|
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .
|
5"L T20 Snap Shackle, 31/32" Opening, 31/32" Bail, 10,000lb. MWL from TYLASKA
S. -made shackles offer race-ready high performance, one-handed operation and they can be snapped open under load. Large bail size ideal for additional sheets, spinnakers and other multi-line applications. They have a breaking strength of 5,000 lbs and weigh just 2. 2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats. Tylaska T8 Snap Shackles are perfect for applications requiring high strength and low weight. 5 ounces in the standard bail configuration.
|
26" Destroyer Wheel from EDSON CORPORATION
These 5-spoke wheels are the latest addition to Edson’s line of Destroyer™ Wheels. Attractive, dished shape and newly-styled, straight hub. Tapered, hollow spokes. Lightweight 1" ovalized grip tubing is the industry standard for smooth wheel steering. 1" bore fits most Edson wheel shafts. Requires Wheel Nut fastener.
|
Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
|
|
5" from KIDDE, 110) from KIDDE, 5lb from KIDDE, 11lb from KIDDE
|
|
Home -> Safety -> Fire Extinguishers -> Portable Extinguishers->Mariner Dry Chemical Fire Extinguishers
Easy to operate—just pull the pin, aim nozzle at the base of the fire and squeeze the handle. Include a plastic USCG-approved bracket. Mariner 110 uses monoammonium phosphate dry chemical which is effective on all types of fires, but corrosive to metal and electronics. Compact model includes pressure gauge. Activation Method: Manual . Disposable or Rechargeable: Disposable . Extinguishing Agent: Sodium bicarbonate dry chemical; Mariner 110 uses monoammonium phosphate dry chemical .
Part No: 466628
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Portable Extinguishers->Extinguisher Brackets
Plastic and aluminum construction.
Part No: 24530
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Portable Extinguishers
Two USCG-approved extinguishers are designed for the marine environment and work fast in an emergency. just pull the pin, aim and squeeze the trigger. Rugged, easy-to-use Zytel valves and handles. Include USCG-approved plastic bracket and metal mounting bracket. Type: Portable . Activation Method: Manual . Disposable or Rechargeable: Disposable . Extinguishing Agent: Regular dry chemical (primarily sodium bicarbonate) . Fire Type Rating: 5-B:C .
Part No: 468088-096
|
|
|
|
Home -> Safety -> Fire Extinguishers->Mariner 110 Fire Extinguisher Twin-Pack
These durable, USCG-approved Mariner 110 Fire Extinguishers feature easy-to-use, non-corrosive Zytel valves and handles. Tri-Class extinguishers will put out oil, grease and electrical fires, as well as wood, paper, cushions, canvas, fiberglass, rubber and plastics. monoammonium phosphate dry chemical. Extinguishing agent is corrosive to metal and electronics. Includes USCG-approved plastic strap bracket. Type: Portable . Activation Method: Manual . Disposable or Rechargeable: Disposable .
Part No: 46806304
|
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Portable Extinguishers->Mariner Dry Chemical Fire Extinguishers
Easy to operate—just pull the pin, aim nozzle at the base of the fire and squeeze the handle. Include a plastic USCG-approved bracket. Mariner 110 uses monoammonium phosphate dry chemical which is effective on all types of fires, but corrosive to metal and electronics. Compact model includes pressure gauge. Activation Method: Manual . Disposable or Rechargeable: Disposable . Extinguishing Agent: Sodium bicarbonate dry chemical; Mariner 110 uses monoammonium phosphate dry chemical .
Part No: 420118
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Portable Extinguishers->Halotron I Fire Extinguishers
Portable, handheld extinguishers are ideal for use against engine fires in the marine environment. Halotron I is a liquefied gas that dissipates after use, leaving no residue or clean up. It is an acceptable alternative to the banned Halon 1211 and is more effective, versatile and user-friendly than either water or carbon dioxide extinguishers. USCG-approved when properly mounted with approved brackets . Clean, EPA-approved agent. 1219443 is 8-3/4"x16-3/16"x7-1/4".
Part No: 466729
|
|
|
|
Home -> Safety -> Fire Extinguishers->Premium Metal Valve Refillable Fire Extinguishers
Easy to operate, rechargeable extinguishers. Feature integral gauges that indicate whether the extinguisher is ready for use. The B-I models include a metal, USCG-approved bracket. The B-II model requires the Rb-18 metal bracket which can be ordered separately.
Part No: 46611201
|
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Portable Extinguishers->Mariner 110 Fire Extinguisher Twin-Pack
These durable, USCG-approved Mariner 110 Fire Extinguishers feature easy-to-use, non-corrosive Zytel valves and handles. Tri-Class extinguishers will put out oil, grease and electrical fires, as well as wood, paper, cushions, canvas, fiberglass, rubber and plastics. monoammonium phosphate dry chemical. Extinguishing agent is corrosive to metal and electronics. Includes USCG-approved plastic strap bracket. Type: Portable . Activation Method: Manual . Disposable or Rechargeable: Disposable .
Part No: 466627
|
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Portable Extinguishers->Halotron I Fire Extinguishers
Portable, handheld extinguishers are ideal for use against engine fires in the marine environment. Halotron I is a liquefied gas that dissipates after use, leaving no residue or clean up. It is an acceptable alternative to the banned Halon 1211 and is more effective, versatile and user-friendly than either water or carbon dioxide extinguishers. USCG-approved when properly mounted with approved brackets . Clean, EPA-approved agent. 1219443 is 8-3/4"x16-3/16"x7-1/4".
Part No: 466728
|
|
|
|
|
Home -> Safety -> Fire Extinguishers->Premium Metal Valve Refillable Fire Extinguishers
Easy to operate, rechargeable extinguishers. Feature integral gauges that indicate whether the extinguisher is ready for use. The B-I models include a metal, USCG-approved bracket. The B-II model requires the Rb-18 metal bracket which can be ordered separately.
Part No: 466204
|
|
|
|
|
Home -> Safety -> Fire Extinguishers->Premium Metal Valve Refillable Fire Extinguishers
Easy to operate, rechargeable extinguishers. Feature integral gauges that indicate whether the extinguisher is ready for use. The B-I models include a metal, USCG-approved bracket. The B-II model requires the Rb-18 metal bracket which can be ordered separately.
Part No: 46622701
|
|
|
|
|
Home -> Safety -> Fire Extinguishers->Premium Metal Valve Refillable Fire Extinguishers
Easy to operate, rechargeable extinguishers. Feature integral gauges that indicate whether the extinguisher is ready for use. The B-I models include a metal, USCG-approved bracket. The B-II model requires the Rb-18 metal bracket which can be ordered separately.
Part No: 366242
|
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Portable Extinguishers->Extinguisher Brackets
Plastic and aluminum construction.
Part No: 23131
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs
Waterproof and Tear Resistant! GPS compatible with Marina listings, Lake structure and Road network.
Part No: 330
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs
Kissimmee Chain North. 25"x38" One-sided. Scale 1:59,000 Waterproof and Tear Resistant! GPS Compatible, Marina Listins, Lake Structure, Road Network and More. Waterproof and Tear Resistant! LAKE KISSIMMEE (Osceola County): Lake Kissimmee is a 34,948-acre lake located 40 miles south of Orlando and 18 miles east of Lake Wales.
Part No: 328
|
|
|
|
Home -> Clothing Accessories -> Bags
The "go anywhere, fit anywhere" key chain pouch that becomes a pack. Just look how small! Handy little mini pouch hooks onto a belt loop, the D-rings, the strap of a purse. or whatever works for you. It's the perfect key chain too! A mere 4. 5" x 1", it fits into the smallest places and doesn't get in the way. Yet, take it anywhere and instantly have a full size, feather light backpack with ample room for light hiking gear or picnic essentials. Color: Blue. 5cm x 7. 5cm) .
Part No: K08-8388
|
|
|
|
Home -> Clothing Accessories -> Bags
The "go anywhere, fit anywhere" key chain pouch that expands to a tote. Just look how small! Handy little mini pouch hooks onto a belt loop, the D-ring of a backpack, the strap of a purse. or whatever works for you. It's the perfect key chain too! A mere 4. 5" x 1", it fits into the smallest places and doesn't get in the way. Yet, take it anywhere and instantly have a full size tote with large main compartment. Color: Blue. Expanded tote measures 15" x 15. 25".
Part No: K08-4888
|
|
|
|
Home -> Boats & Motors -> Dinghies -> Pedal Boats
A true family pedal boat Designed for up to three persons pedaling, plus two molded seats in the back. The whole family can get in on the action, whether you want to tour the shoreline or fish from the back. Built-in cooler/storage area with drain and drink holders. Thermo-formed polyethylene. Seating for 3 adults and 2 kids . Internal steering linkage system which eliminated damage from obstructions . Beverage holders . 5-year deck and hull warranty is 30% longer than leading competitor .
Part No: WW5AQ
|
|
|
|
Home -> Boats & Motors -> Dinghies -> Rigid Dinghies
An excellent alternative for the freshwater angler who doesn’t want to put up with trailering his ride to those secluded fishing holes. Rugged UV-stabilized Fortiflex High Density Polyethylene deck and hull will hold up for years of adventure, and won’t fade with prolonged use in the sun. Adjustable, removable swivel seats have durable supports and provide excellent comfort, while recessed drink and tackle holders offer further convenience.
Part No: 11077
|
|
|
|
Home -> Boats & Motors -> Dinghies -> Pedal Boats
Stainless steel components for pedaling fun in saltwater Designed for up to three persons pedaling, plus two molded seats in the back. The whole family can get in on the action—whether you want to tour the shoreline or go fishing—with this pedalboat made for saltwater use. Thermo-formed polyethylene construction is rugged and stable for years of fun. A stainless-steel pedal crank and hub withstands corrosive conditions. Includes a built-in cooler/storage area with drain and drinkholders.
Part No: WW5AQSS
|
|
|
|
Home -> Boats & Motors -> Dinghies -> Pedal Boats
This Pedal Boat is the perfect balance between exercise and relaxation. Features fully adjustable high-back seats, built-in cooler/storage space and a canopy for excellent sun protection. Seats three adults and two children. Tough thermo-formed polyethylene hull and deck, strong nylon paddle wheel and polystyrene foam for flotation. Intended for freshwater use Length: 8'7"; width: 69"; weight: 140lb.
Part No: WWLBL04
|
|
|
|
Home -> Boats & Motors -> Dinghies -> Rigid Dinghies
Modified tri-hull design for stability and plenty of space Rugged polyethylene construction and a cathedral hull featuring a modified tri-hull design make the Water Tender 9. 4 stable spacious and comfortable. Molded-in carrying handles and stern lifting rings make transportation a breeze. The 9'4" long, 55" beam dinghy is rated to carry up to three people and a 5hp engine. Construction: Thermoformed 2-piece hull and deck. Hull Shape: Modified tri-hull Length: 9’4” . Weight: 114lb.
Part No: WT94CW
|
|
|
|
Home -> Boats & Motors -> Dinghies
Fully loaded but fits in the bed of a pickupFits easily into the back of a pickup truck for quick and convenient transport to small waters with big fish. Includes two seats. Constructed of highly impact resistant polyethylene and broad beamed for stability. Power with a trolling motor or an outboard up to 7hp (sold separately). Length: 10'2"; beam: 55"; weight: 165lb. Hull Material: Polyethylene Construction: Thermoformed 2-piece hull and deck . Tilt-swivel fishing chairs.
Part No: BT102DG
|
|
|
|
Home -> Boats & Motors -> Dinghies -> Rigid Dinghies
When getting to the water fast and easily is crucial for you, the Bass Hound has got you coveredIt’s small and lightweight enough for you and a fishing buddy to toss in the back of a pickup, but durable enough to last with dent-resistant. Pre-wired for a trolling motor at bow and stern for mounting versatility. A built-in livewell with drain and aerator pump and comfy twin swivel fishing chairs help make this the freshwater angler’s most useful tool next to your rod, of course.
Part No: BT94DG
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Acetone Solvent
Excellent for cleaning up a wide variety of paints, resins and epoxiesFast-drying, powerful solvent. Effective for metal cleaning, epoxies, vinyls, lacquers, solvent-based contact cement or adhesives, plastic and polyester resins and fiberglass.
Part No: GAC18
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Acetone Solvent
Excellent for cleaning up a wide variety of paints, resins and epoxiesFast-drying, powerful solvent. Effective for metal cleaning, epoxies, vinyls, lacquers, solvent-based contact cement or adhesives, plastic and polyester resins and fiberglass.
Part No: QAC18
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Lacquer Thinner
For thinning lacquer and general cleanupProvides maximum leveling and highest blush resistance when thinning nitrocellulose lacquer. Also excellent for cleanup.
Part No: GML170
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Lacquer Thinner
For thinning lacquer and general cleanupProvides maximum leveling and highest blush resistance when thinning nitrocellulose lacquer. Also excellent for cleanup.
Part No: CML170
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Methyl Ethyl Ketone Solvent
A strong cleanup solvent—very effective for epoxiesMEK has characteristics similar to acetone, but is 30% slower evaporating.
Part No: QME71
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents
Versatile solvent/thinner with many uses onboardUse as a shellac thinner and remover or a smokeless fuel for alcohol stoves. Also cleans and degreases metal, glass and rubber. Gallon.
Part No: GSL26
|
|
|
