Top Sellers
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .
|
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
Abandon Ship Dry Bag from WEST MARINE
Store critical safety and survival gear at the ready and keep it protected from wet conditions. Featuring a roll-top dry seal for complete waterproofness, this bag has plenty of room to keep essentials dry, such as a watermaker, EPIRB, instant meals and first aid supplies. Features lanyard, three internal pockets and elastic loops for flares. 30Ltr.
|
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
500gph 12V Bilge Pump, 3/4" Port, 1.9A Draw, 2.5A Fuse, 3-1/2"H x 2-3/8"W from RULE INDUSTRIES
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
|
Fiberglass Boat Cleaner 920 1/2 Gallon from COLLINITE
Removes rust, exhaust, oil, grease, and oxidation stains from fiberglass. Restores the original color quickly without hard rubbing or buffing, leaves a chemically clean surface to which waxes can bond. Use with fiberglass boat wax or heavy-duty paste Fleetwax . Made in U. S. A.
|
Stainless-Steel Compact Electric Horn - Double from AFI
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
|
3-Way Bronze Ball Valve, 1/2" Size (NPT) from APOLLO
Use in place of a "T" fitting to switch between two tanks.
|
Windshield Screw Cover Foam, 1/4"H x 3/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
|
Dry-Seal Shaft Seal, 1-1, 2-1, 1-3, 3-1, 2" from LASDROP SHAFT SEALS
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-138-312
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-118-212
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-200-334
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-314
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-334-7
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-134-314
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-334-512
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-334-6
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-234-6
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-212-512
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-200-412
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-112-238
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-278
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-134-3
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-312-5
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-212-314
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-212-5
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-334-658
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-134-312
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-138-212
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-114-212
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-334
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-314-6
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-400-512
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-112-212
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-134-258
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-118-134
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-300-6
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-134-334
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal
As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed.
Part No: D-214-412
|
|
|
