Top Sellers
|
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
|
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
|
|
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
Stainless-Steel Compact Electric Horn - Double from AFI
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
|
2" from LASDROP SHAFT SEALS, 1-1, 4" from LASDROP SHAFT SEALS, 2-1
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-114-258
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-314-412
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-400-8
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-200-278
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-138-312
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-118-214
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-214-4
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-112-234
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-112-258
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-134-412
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-134-4
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-214-312
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-300-512
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-200-312
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Gen II Shaft Seal
The Gen II offers exclusive features that make it the premier shaft seal on the market. The Friction Ring assembly is mounted with a rigid connection hose and uses a carbon graphite sealing surface all encased by a durable copolymer housing. Built into the friction ring assembly is a cutlass bearing to ensure proper and constant alignment to the shaft. The Clamp/Pressure Assembly secures the assembly around the shaft, preventing the galling or damage to the shaft that can occur with setscrews.
Part No: G-200-334
|
|
|
|
Home -> Books & Videos -> Videos & DVDs
Latitudes and Attitudes Television: Season 3 A 3-disc box set. Sail the British Virgin Islands with 60 Latitudes and Attitudes readers on a fantastic "Share the Sail" Caribbean adventure. There's lots of fun stuff from Lake Superior, Antigua, the Marquesas, I. C. , and the San Juan Islands. Meet Chris from "Sailor’s Quest," while the Shards continue their tour of the Mediterranean. And each show is nicely wrapped up with Bob's pearls of cruising wisdom in "Attitudes.
Part No: LATV003
|
|
|
|
Home -> Clothing Accessories -> Bags
Assorted colors with black ends and straps Random color selection.
Part No: CABM
|
|
|
|
Home -> Clothing Accessories -> Bags
Mesh bag with web carry straps and drawstring opening.
Part No: M-SAC
|
|
|
|
.
Part No: 25002
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Lubricants
Its oxidative stability makes it suitable for extended periods of operation at high temperatures and for ”sealed for life” applications. The grease offers corrosion protection and resists salt water, so it won't soften, breakdown or wash out in wet applications. Provides maximum protection under severe conditions. Suitable for extended periods of operation at high temperatures and for “sealed for life” applications. Resists salt water; won't soften, breakdown or wash out in wet applications.
Part No: 25014
|
|
|
|
|
.
Part No: 25016
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Corrosion Block
Stops corrosion on all metalsThis anti-corrosion lubricant/penetrant stops or prevents corrosion on all metals. Its hydrophobic chemistry acts like an "off switch" to prevent dissimilar metal corrosion. Leaves a non-toxic, non-greasy, clean, clear protective film that blocks corrosion in a wide variety of applications, including marine electronics, batteries, circuit panels, standing rigging, fishing gear and inboard or outboard motors. 12oz. aerosol or 32oz.
Part No: 20012
|
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->Corrosion Block
Stops corrosion on all metalsThis anti-corrosion lubricant/penetrant stops or prevents corrosion on all metals. Its hydrophobic chemistry acts like an "off switch" to prevent dissimilar metal corrosion. Leaves a non-toxic, non-greasy, clean, clear protective film that blocks corrosion in a wide variety of applications, including marine electronics, batteries, circuit panels, standing rigging, fishing gear and inboard or outboard motors. 12oz. aerosol or 32oz.
Part No: 20032
|
|
|
|
|
.
Part No: 25003
|
|
|
|
Home -> Interior, Flags & Gifts -> Knives & Pocket Tools
The Leatherman Squirt P4 is the first miniature pliers multi-tool tough enough to be a Leatherman. Attach the spring-action Squirt P4 to your key ring or backpack; with three screwdrivers, wire cutters, a knife blade and more, it keeps your on-the-go life going. The Squirt P4 is tiny, tough and 100% Leatherman. 420HC Clip Point Knife . Spring-action Needlenose pliers . Regular Pliers . Extra-small Screwdriver . Medium Screwdriver . Flat Phillips Screwdriver . Wood/Metal File .
Part No: 80040003K
|
|
|
|
Home -> Interior, Flags & Gifts -> Knives & Pocket Tools->Skeletool® Multi-Tools
Although skeletal in appearance, that certainly doesn’t mean that these multi-tools don’t pack plenty of substance. In fact, these 5oz. , sleek-looking models include regular and needlenose pliers, wire cutters, hard-wire cutters, a Phillips screwdriver with 3/16" and 1/4" bits, a bottle opener, and carabiner clip. Skeletool® CX is made of 154CM stainless steel blade with DLC-coated (tungsten) stainless steel handles. Features one-handed opening. All blades and tools are locking.
Part No: 830846
|
|
|
|
|
Home -> Interior, Flags & Gifts -> Knives & Pocket Tools -> Multi-Purpose Tools->Skeletool® Multi-Tools
Although skeletal in appearance, that certainly doesn’t mean that these multi-tools don’t pack plenty of substance. In fact, these 5oz. , sleek-looking models include regular and needlenose pliers, wire cutters, hard-wire cutters, a Phillips screwdriver with 3/16" and 1/4" bits, a bottle opener, and carabiner clip. Skeletool® CX is made of 154CM stainless steel blade with DLC-coated (tungsten) stainless steel handles. Features one-handed opening.
Part No: 830850
|
|
|
|
Home -> Interior, Flags & Gifts -> Knives & Pocket Tools
Loaded with the most requested features, Blast is ready for work. Longer blades mean easier slicing, sawing, filing and more, while Zytel handle inserts provide a comfortable, reliable grip. New designs for the handles and pliers help Blast sustain more than double the squeezing load of the original PST. Needlenose Pliers . Regular Pliers . Wire Cutters . Hard-Wire Cutters . Clip-Point Knife . Wood/Metal File . Saw . Scissors .
Part No: 830033
|
|
|
|
Home -> Interior, Flags & Gifts -> Knives & Pocket Tools -> Multi-Purpose Tools
Surge is sure to make a splash at the work site Surge® is a multi-tool powerhouse-built with tough new pliers, longer blades and easy-to-use locks. A unique blade exchanger comes with saw and diamond/wood file blades. Large and small bit drivers include double-ended bits . 4 outside-opening blades . Leatherman's strongest scissors yet . Stainless Steel . All-Locking Blades . Needlenose Pliers . Regular Pliers . Wire Cutters . Hard-Wire Cutters .
Part No: 830161
|
|
|
|
Home -> Interior, Flags & Gifts -> Knives & Pocket Tools -> Multi-Purpose Tools
Fuse features an all-blades locking system that is 50% stronger than our original locks. And one-at-a-time blade selection gets you just the tool you want. With a slim chassis and an assortment of the most-needed tools, Fuse puts portability at the forefront of your need to be prepared. Needlenose Pliers . Regular Pliers . Wire Cutters . Hard-Wire Cutters . Clip-Point Knife . Scissors . Large Screwdriver . Small Screwdriver .
Part No: 830026
|
|
|
