Top Sellers
Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Screen Kit Hinge from LEWMAR
Allows the aluminum framed screen included with Lewmar Trim and Screen Kits to be hinged for easier access to the hatch.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Anchor Safety Strap from LEWMAR
18" long stainless steel; PVC coated with 4" bolt, nut and snap link Fits 1/4", 5/16" and 3/8" chain.
|
Triple, 1/2" - 9/16" Line Dia., 59.6oz from LEWMAR
Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Application: High load applications on boats to 55', low load and control lines on larger boats . Safe Working Load: 2650lb.
|
60mm Racing Fiddle Block with Becket & Cleat, 882lb. SWL, 12.4oz. from LEWMAR
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .
|
Replacement Delrin Roller, 3" Dia., 3-3/8" Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Circlips, Package of Five (5) from LEWMAR
Spares Kit, Single-Speed Winches For all single-speed winches less than 11 years old, includes 4 pawls, 4 pawl springs, 4 circlips. . Spares Kit, Two-Speed Winches For all two-speed and self-tailing winches to 16ST-66ST. Includes 2 circlips, 8 pawls, 12 pawl springs, 3 keys, 8 gear spindle sleeves, 2 collets . Spares Kit, Three-Speed Winches For all three-speed nonself-tailing winches to 65. Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings .
|
Pivoting Self-Launch Bow Roller from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Replacement Delrin Roller, 2-1/2" Dia., 1-3/4 Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Bow Roller, Fits Sand (Danforth Style), Anchors up to 20 lb., Special Narrow Width (US Only) from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
|
from LEWMAR, SWL from LEWMAR, 16"W from LEWMAR, 8"H from LEWMAR
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Windlass Control Solenoids
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
Part No: 68000318
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- & Two-Speed Self-Tailing Winches
Advanced technology and innovative features has made Ocean Series the world’s most popular winches. Racing sailors appreciate the smooth operation and flawless performance. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy—easier still with a self-tailing model, which incorporates Lewmar’s Wavespring feature, a combination of the gentle Wavegrip and self-adjusting springs to handle today’s smaller diameter ropes.
Part No: 49016000
|
|
|
|
Home -> Sailboat -> Blocks->40mm Synchro Control Blocks
Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Sheave: Composite reinforced plastic . Ball Bearings: Stainless steel . Line Size: 3/8" max. . Cheek Material/Finish: Composite reinforced plastic.
Part No: 29901425
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Stainless-Steel Horizon™ Claw Anchors
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
Part No: 0058915
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Snap Shackles->Synchro Block Snap Shackles
Replaces the standard shackle fitted to all blocks Will also fit all Lewmar Ocean blocks and most other blocks of similar size .
Part No: 29925040
|
|
|
|
Home -> Sailboat -> Winches->OneTouch Winch Handles
Squeeze-and-insert winch handle for quick one-handed operation Save valuable time in heated mark-roundings or tacking duals with this innovative winch handle. Its patented "OneTouch" lock-in mechanism offers fast, one-handed winch exit and entry, so you spend less time fiddling with a sticky locking lever and more time sailing. Just squeeze the release button (which runs the entire length of the handle) and pull to unlock in one quick, easy motion.
Part No: 29140040
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->60mm Control Blocks
.
Part No: 29901670
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Ocean Series Hatches
Well-engineered hatches with CE-certified quality materials and construction. Flat base or 1'' flange base (pictured)Silver anodized aluminum finish3-year warranty. Flat base cutout sizes:Ocean 10 - 10" x 10". Ocean 30 - 12 5/8"W x 17 3/4"L. Ocean 40 - 16 3/8" x 163/8". Ocean 60 - 19 3/4" x 19 3/4". Ocean 70 - 24 1/2" x 24 1/2". Flange base cutout sizesOcean 10 - 10 3/16" x 10 3/16".
Part No: 39670070
|
|
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts
For all single-speed winches less than 10 years old.
Part No: 19700100
|
|
|
|
Home -> Sailboat -> Winches->Barient Winch Repair Kit #1
Barient may be gone, but you can still get parts from us. Repair kit for small winches typically found on boats under 40ft.
Part No: 19712056
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers
For Lewmar Pro-Series Windlass wireless remote operation.
Part No: 68000593
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Anchor Rollers & Mounts->Anchor Rollers
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
Part No: 66840062
|
|
|
|
|
Home -> Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901324
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Anchor Rollers & Mounts->Chain Stoppers
Works with your anchor roller to take tension off your windlass. Removable pawl flips up when not in use. Standard model handles 1/4" to 3/8" chain and is made of polished stainless steel.
Part No: 66840081
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Treadmaster Step Pads
Maintain your footing under all conditions! Self-adhesive, diamond-patterned, nonskid pads are great for decks, steps, dinghy floors, personal watercraft, etc. They resist wear and tear, peeling, saltwater, fuels and chemicals. Pads have rounded edges and are precut to fit most common step sizes. Trim with scissors for a custom fit. Peel-and-stick installation. Sold in pairs.
Part No: JWTU200025
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Medium-Profile Hatches
Until now, replacing scratched or cracked lenses meant sending the lid to the manufacturer or paying a professional to repair it. Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. CE-certified aluminum frame has smooth, rounded edges, inset hinges and rounded corners for snag-resistance. All hatches have flange bases. Medium-profile hatches have a deeper frame section and 12mm acrylic in all sizes.
Part No: 39950020
|
|
|
|
Home -> Sailboat -> Blocks->72mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29927210
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Trim and Screen Kits
Give a finished look to your Lewmar hatch installation. Kits include an easy-to-clean white ABS interior trim with a leatherette finish, custom-fitted aluminum fly-screen, trim fasteners and screen retainers.
Part No: 367610252
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Ports->Standard Opening Portlights
These portlights feature friction hinges that hold open at any position without stays or straps. Designed for easy installation, they require no complicated cutouts and include mounting hardware, trim, fly screens and instructions. Smoke gray acrylic windows with white or ivory trim and clear-anodized aluminum frames. Material: Smoked gray acrylic lens, clear anodized-aluminum frame . Latches: Quick-action handles . Included Accessories: Mounting hardware, trim, fly screens, instructions .
Part No: 393220500
|
|
|
|
|
Home -> Sailboat -> Winches->Spare Winch Parts
Spares Kit, Single-Speed Winches For all single-speed winches less than 11 years old, includes 4 pawls, 4 pawl springs, 4 circlips. . Spares Kit, Two-Speed Winches For all two-speed and self-tailing winches to 16ST-66ST. Includes 2 circlips, 8 pawls, 12 pawl springs, 3 keys, 8 gear spindle sleeves, 2 collets . Spares Kit, Three-Speed Winches For all three-speed nonself-tailing winches to 65. Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings .
Part No: 15000375
|
|
|
|
|
Home -> Sailboat -> Winches->Barient Winch Repair Kit #1
Barient may be gone, but you can still get parts from us. Repair kit for small winches typically found on boats under 40ft.
Part No: PK1
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- and Two-Speed Winches, Non-Self-Tailing
Racing sailors will appreciate the smooth operation and flawless performance developed through years of experience on the race course. A massive, all-bronze one-piece center stem supports stainless steel main shafts and gear spindles that lend exceptional strength. Bronze gear trains deliver smooth power; high-tensile bronze gears are machine cut to very high tolerances. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy.
Part No: 49008030
|
|
|
|
|
Home -> Sailboat -> Winches
Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings.
Part No: 19700300
|
|
|
|
|
Home -> Sailboat -> Blocks->60mm Control Blocks
.
Part No: 29906601
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Roller Shade Screen
The new Roller Shade and Screen, is a tough multi-functional hatch accessory, which features an integral black-out screen and fly screen. The Roller Shade Screen will enhance Lewmar's most popular hatch sizes from the current Low and Medium profile ranges. The components offer versatile fitting options such as installing the trim and cassette roller as an integral part to an existing hatch or adding the cassette roller at a later date.
Part No: 367740252
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Electric Thruster Control Connecting Cables
Lewmar supplies 4-wire cables suitable for most installations or 5-wire cables for installations where a Battery Switch is connected. To install, simply measure the distance from the Thruster to the Panel and choose the lead that fits best.
Part No: 589020
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Six-Spoke Folding Wheels
Ideal for a range of yachts, including those with twin-wheel steering; Designed for boats up to 45ft Conventional wheels act as a barrier across most cockpits, reducing available space. The two-turn buttress-threaded split-spoke mechanism is operated by a simple twist of the composite hand grip. Ideal for a range of yachts, including those with twin-wheel steering, allowing the unused wheel to be folded for better instrument visibility and freedom of movement. Designed for boats up to 45'.
Part No: 89700408
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Anchor Rollers
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
Part No: 66840061
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Pro Fish Free-Fall Windlasses
They feature controlled "lockoff" to start or stop anchor free-fall by simply pressing the "up/down" switch. This free-fall operation can also be disengaged to power down. Includes a new stainlesssteel fleming/stripper that withstands heavy loads. All come complete with Switch Gear and Installation kit. As an additional feature, in an emergency involving loss of power these windlasses can be operated manually with a standard 1/2" ratchet handle (sold separately).
Part No: 6656411108-102
|
|
|
|
|
Home -> Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901328
|
|
|
