Top Sellers
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
PAR-Max 4 Water-System Pump, 12V from JABSCO
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Circlips, Package of Five (5) from LEWMAR
Spares Kit, Single-Speed Winches For all single-speed winches less than 11 years old, includes 4 pawls, 4 pawl springs, 4 circlips. . Spares Kit, Two-Speed Winches For all two-speed and self-tailing winches to 16ST-66ST. Includes 2 circlips, 8 pawls, 12 pawl springs, 3 keys, 8 gear spindle sleeves, 2 collets . Spares Kit, Three-Speed Winches For all three-speed nonself-tailing winches to 65. Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings .
|
Anchor Safety Strap from LEWMAR
18" long stainless steel; PVC coated with 4" bolt, nut and snap link Fits 1/4", 5/16" and 3/8" chain.
|
60mm Racing Fiddle Block with Becket & Cleat, 882lb. SWL, 12.4oz. from LEWMAR
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .
|
|
|
Holding Clips, 1/4" from BECKSON MARINE INC
Heavy-duty, nonmagnetic, noncorroding clips. Require four #8 FHWS fasteners.
|
Outboard Oil - SAE 10W-40 from WEST MARINE
With a higher number of performance-boosting additives than automotive oil, this synthetic blend meets and exceeds the needs of high-performance outboards. It's special formula protects outboards from friction damage and engine wear. Outstanding viscosity at low temperatures. Greater detergency. Resists engine build up. Exceeds all 4-stroke outboard requirements.
|
Synthetic Blend 4-Cycle Engine Oil, Quart from QUICKSILVER
Recommended for gasoline and diesel-powered stern-drive and inboard engines that require FC-W Certified, SAE 25W-40 oil.
|
Flush Kit For 2- & 4-Stroke Outboards from MERCURY MARINE
Fits Mercury/Mariner 4 and 5hp 2-stroke outboards and 4, 5 and 6hp 4-stroke outboards.
|
|
|
|
from LEWMAR, 2nd from LEWMAR, 4"H from LEWMAR, 8"H from LEWMAR
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Trim and Screen Kits
Give a finished look to your Lewmar hatch installation. Kits include an easy-to-clean white ABS interior trim with a leatherette finish, custom-fitted aluminum fly-screen, trim fasteners and screen retainers.
Part No: 367670252
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Low-Profile Hatches
Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. The seal and acrylic are fitted into the aluminum frame to produce a stronger, more leak-proof hatch. All hatches feature a vent position, flange base and sizes 30 and larger have lockable internal and external handles for added security. CE Area II approved. Low-profile hatches have 8mm acrylic in sizes 00 through 54, and 10mm acrylic in size 60.
Part No: 39920030
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Horizon™ Claw Anchors
Remains stable even when tide and wind conditions changeConstructed of heat-treated high-tensile steel in a single-piece design that’s very effective in a variety of seabeds. It remains stable under a wide range of tide and wind conditions. Stows easily on a bow roller. Lifetime warranty against breakage. Material: High-tensile steel . Application: Most bottom types . Pros: Inexpensive relative to similar designs. Quickly and reliably sets in most seabeds. High-strength one-piece design.
Part No: 0057930
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->CQR™ Anchors
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
Part No: 0056505
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlass Accessories->Windlass Control Solenoids
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
Part No: 68000320
|
|
|
|
Home -> Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901320
|
|
|
|
Home -> Sailboat -> Winches -> Self-Tailing Winches->ELS & E-Series Electric Self-Tailing Winches & Conversion Kits
Electric winches operate at the touch of a button and provide a full manual two-speed override when you want it. The ELS Series use a solid-state control box that runs the winch at high speed and slows it down as the load increases. Quiet running and easy to install, these winches provide efficient operation and are suitable for genoa sheets on boats 30'–36', and for main halyards on boats 40'–46'. Both series include the winch, drive unit, motor, deck switch, control box and circuit breaker.
Part No: 490462561
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- & Two-Speed Self-Tailing Winches
Advanced technology and innovative features has made Ocean Series the world’s most popular winches. Racing sailors appreciate the smooth operation and flawless performance. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy—easier still with a self-tailing model, which incorporates Lewmar’s Wavespring feature, a combination of the gentle Wavegrip and self-adjusting springs to handle today’s smaller diameter ropes.
Part No: 49048056
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Ocean Series Hatches
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
Part No: 39670050
|
|
|
|
Home -> Sailboat -> Blocks->80mm Racing Blocks
Very low friction blocks permit easy line handling and offer the best strength-to-wt(oz) ratios in the business. Universal heads and flush fasteners are standard. Sheave: Anodized aluminum alloy. Ball Bearings: Delrin. Sheave Size: 3-1/8" (80mm). Line Diameter: 1/2" max. Cheek Material/Finish: Anodized aluminum alloy. Shackle/Strap Type: Swivel with three-way locking, drilled-out head. Cleat: Models with cleat: adjustable cam arm, aluminum cam cleat.
Part No: 29901814
|
|
|
|
|
Home -> Sailboat -> Blocks->40mm Synchro Control Blocks
Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Sheave: Composite reinforced plastic . Ball Bearings: Stainless steel . Line Size: 3/8" max. . Cheek Material/Finish: Composite reinforced plastic.
Part No: 29901441
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Medium-Profile Hatches
Until now, replacing scratched or cracked lenses meant sending the lid to the manufacturer or paying a professional to repair it. Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. CE-certified aluminum frame has smooth, rounded edges, inset hinges and rounded corners for snag-resistance. All hatches have flange bases. Medium-profile hatches have a deeper frame section and 12mm acrylic in all sizes.
Part No: 39940020
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches->D2 Rope Clutches
Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Application: High load applications on boats to 55', low load and control lines on larger boats . Safe Working Load: 2650lb.
Part No: 29103412
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Anchor Rollers
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
Part No: 66840064
|
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Anchor Rollers
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
Part No: 68000857
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925003
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->CQR™ Anchors
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
Part No: 0056509
|
|
|
|
|
Home -> Sailboat -> Blocks->40mm Synchro Control Blocks
Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Sheave: Composite reinforced plastic . Ball Bearings: Stainless steel . Line Size: 3/8" max. . Cheek Material/Finish: Composite reinforced plastic.
Part No: 29901423
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers
Allows you to set up two operation stations for your windlass. A footswitch at the bow and a hand held remote at the helm or two foot switches, it's all up to you.
Part No: 0052507
|
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- & Two-Speed Self-Tailing Winches
Advanced technology and innovative features has made Ocean Series the world’s most popular winches. Racing sailors appreciate the smooth operation and flawless performance. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy—easier still with a self-tailing model, which incorporates Lewmar’s Wavespring feature, a combination of the gentle Wavegrip and self-adjusting springs to handle today’s smaller diameter ropes.
Part No: 49046055
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Stainless-Steel Horizon™ Claw Anchors
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
Part No: 0058930
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->OneTouch Winch Handles
Squeeze-and-insert winch handle for quick one-handed operation Save valuable time in heated mark-roundings or tacking duals with this innovative winch handle. Its patented "OneTouch" lock-in mechanism offers fast, one-handed winch exit and entry, so you spend less time fiddling with a sticky locking lever and more time sailing. Just squeeze the release button (which runs the entire length of the handle) and pull to unlock in one quick, easy motion.
Part No: 29140042
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->TT Electric Thrusters
When maneuvering in adverse conditions or tight spaces, control is of the utmost importance. The confidence and control of having a thruster makes any situation a lot less stressful. A unique seal helps reduce installation time, eliminates leaks and contamination and reduces maintenance because there is no reservoir to install. Motors are electronically protected, and have self-resetting thermal protection. To order, select a thruster, fiberglass tunnel, connecting cable, fuse and controller.
Part No: 591401
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925002
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->90mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29929001
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Treadmaster Step Pads
Maintain your footing under all conditions! Self-adhesive, diamond-patterned, nonskid pads are great for decks, steps, dinghy floors, personal watercraft, etc. They resist wear and tear, peeling, saltwater, fuels and chemicals. Pads have rounded edges and are precut to fit most common step sizes. Trim with scissors for a custom fit. Peel-and-stick installation. Sold in pairs.
Part No: JWTU200026
|
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Treadmaster Step Pads
Maintain your footing under all conditions! Self-adhesive, diamond-patterned, nonskid pads are great for decks, steps, dinghy floors, personal watercraft, etc. They resist wear and tear, peeling, saltwater, fuels and chemicals. Pads have rounded edges and are precut to fit most common step sizes. Trim with scissors for a custom fit. Peel-and-stick installation. Sold in pairs.
Part No: JWTU200038
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports
Allows the aluminum framed screen included with Lewmar Trim and Screen Kits to be hinged for easier access to the hatch.
Part No: 361196992
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->50mm Synchro Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29925004
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Medium-Profile Hatches
Until now, replacing scratched or cracked lenses meant sending the lid to the manufacturer or paying a professional to repair it. Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. CE-certified aluminum frame has smooth, rounded edges, inset hinges and rounded corners for snag-resistance. All hatches have flange bases. Medium-profile hatches have a deeper frame section and 12mm acrylic in all sizes.
Part No: 39970020
|
|
|
