1-800-685-4838

Welcome! Please Sign-In

Top Sellers

Prop Puller for Shafts 1-5/8" to 2", 13/16" Min Clearance from NATIONAL PRODUCTS
Removes two-, three-, most four- and and some five-bladed propellers with shafts from 1"–3"dia. Forked-end slips behind the prop hub even when clearance is tight. A recess on the shaft end prevents slippage. High-strength steel.

Prop Puller for Shafts 1" to 1-1/2", 3/4" Min Clearance from NATIONAL PRODUCTS
Removes two-, three-, most four- and and some five-bladed propellers with shafts from 1"–3"dia. Forked-end slips behind the prop hub even when clearance is tight. A recess on the shaft end prevents slippage. High-strength steel.

Shaft Bearing - 1"ID; 1 1/2"OD; 4"L from MORSE BEARINGS
Rubber-lined naval brass sleeve bearings adapt equally well to strut and stern-tube mounts. External brass shells are machined and polished to provide easy fitting. Specially formulated oil- and chemical-resistant nitrile rubber is securely bonded to the shell. Sleeve bearings are usually installed by light press fitting.

12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.

Moeller Boating Topside Fuel Tank 18 Gallon from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 7. 87"H.

5-Stud, 5" Bolt Pattern, 1-3/8ID, 1-1/16" OD Tapered Spindle, 12"+ Dia Wheel, 1750lb Max Cap from TIEDOWN ENGINEERING
Reduce wear and friction and increase tow vehicle mileage with one of these innovative systems. Oil bath lubrication system rotates individual roller bearings more than four times through oil with every wheel revolution to keep hub and bearings cooler. See-through, leak-proof threaded oil cap affords oil level view. Each kit includes bearings, threaded oil cap, cotter pin and lug nuts. Fits all wheels with a center hole of 2. 90" or larger.

MS-AV600G DVD Player from FUSION
Revolutionary new marine stereo plays CD/MP3 and DVD. Incorporating an intelligent user memory, FUSION's latest Alpha Search Technology and extended Apple iPod support with fully integrated iPod user interface, dual mono subwoofer output and ingenious behind dash engineering all contained in a 100% aluminum chassis. The 600 series is the next step in the evolution of marine entertainment technology. Auxiliary in Yes . Display 2. 7” FSTN transflective LCD. Line Out 1 x stereo, 1 x subwoofer .

HS Shaft Seal - 1 1/4" x 2 1/4" x 6 1/2" from PSS SHAFT SEAL
.

HS Shaft Seal - 1 1/2" x 3" x 8 1/2" from PSS SHAFT SEAL
.

HS Shaft Seal - 1" x 1 1/2" x 6 1/4" from PSS SHAFT SEAL
.

HS Shaft Seal - 1 1/2" x 2 1/2" x 8 1/8" from PSS SHAFT SEAL
.

Women’s Bluefish 2-Eye Mocs, Linen, 8 1/2 from SPERRY TOP-SIDER
For a personalized fit, slip on these genuine handsewn Mocs. The contoured last and polyurethane footbed provide total comfort while the internal heel offers lateral support. The Sperry Top-Sider leather is water resistant and stain resistant with a breathable mesh upper. The sidewall is stitched to the midsole and the molded rubber outsole is razor siped with weather channeling grooves for an excellent grip. Soft, full grain and oil-tanned leather uppers are easy to clean. Ivory, Linen/Oat.

Women’s Bluefish 2-Eye Mocs, Ivory, 8 1/2 from SPERRY TOP-SIDER
For a personalized fit, slip on these genuine handsewn Mocs. The contoured last and polyurethane footbed provide total comfort while the internal heel offers lateral support. The Sperry Top-Sider leather is water resistant and stain resistant with a breathable mesh upper. The sidewall is stitched to the midsole and the molded rubber outsole is razor siped with weather channeling grooves for an excellent grip. Soft, full grain and oil-tanned leather uppers are easy to clean. Ivory, Linen/Oat.

Men's A-O 2-Eye Boat Shoe - Sahara, Sahara, 11 1/2 from SPERRY TOP-SIDER
A legendary boat shoe! The corner stone of classic nautical style with oil-tanned leather upper and handsewn Tru-Moc construction. Color: Sahara. Men's Half Sizes: 8 - 12, 13. Non-marking rubber sole.

Men's A-O 2-Eye Boat Shoe - Brown, Brown, 9 1/2 from SPERRY TOP-SIDER
Easy clean uppers in tumbled full grain and oil-tanned leathers. Genuine hand-sewn Tru-Moc construction provides personalized fit. 3/4 leather footbed with internal shock absorbing EVA heelcup for comfort and support. Colors: Brown.

Dry-Seal Shaft Seal, 1-1, 2-1, 2", 2" from LASDROP SHAFT SEALS, 1-3, 3-1

This site contains about 40,764 documents.

View by:

Title | Category | Manufacturer | Part No | Price

Page: 1 100 200 300 400 410 420 430 440 450 460 470 480 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 520 530 540 550 560 570 580 590 600 700 800 900 1,000 1,100 1,200 1,300 1,359

	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 3-3/4", Stern tube: 5-1/2" from LASDROP SHAFT SEALS $879.00 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-334-512
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 3-3/4", Stern tube: 6" from LASDROP SHAFT SEALS $919.00 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-334-6
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 2-3/4", Stern tube: 6" from LASDROP SHAFT SEALS $439.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-234-6
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 2-1/2", Stern tube: 5-1/2" from LASDROP SHAFT SEALS $394.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-212-512
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 2", Stern tube: 4-1/2" from LASDROP SHAFT SEALS $289.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-200-412
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 1-1/2", Stern tube: 2-3/8" from LASDROP SHAFT SEALS $199.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-112-238
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 2-1/4", Stern tube: 2-7/8" from LASDROP SHAFT SEALS $309.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-214-278
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 1-3/4", Stern tube: 3" from LASDROP SHAFT SEALS $234.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-134-3
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 3-1/2", Stern tube: 5" from LASDROP SHAFT SEALS $769.00 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-312-5
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 2-1/2", Stern tube: 3-1/4" from LASDROP SHAFT SEALS $354.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-212-314
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 2-1/2", Stern tube: 5" from LASDROP SHAFT SEALS $374.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-212-5
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 3-3/4", Stern tube: 6-5/8" from LASDROP SHAFT SEALS $919.00 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-334-658
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 1-3/4", Stern tube: 3-1/2" from LASDROP SHAFT SEALS $234.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-134-312
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 1-3/8", Stern tube: 2-1/2" from LASDROP SHAFT SEALS $157.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-138-212
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 1-1/4", Stern tube: 2-1/2" from LASDROP SHAFT SEALS $157.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-114-212
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 2-1/4", Stern tube: 3-3/4" from LASDROP SHAFT SEALS $309.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-214-334
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 3-1/4", Stern tube: 6" from LASDROP SHAFT SEALS $699.00 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-314-6
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 4", Stern tube: 5-1/2" from LASDROP SHAFT SEALS $989.00 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-400-512
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 1-1/2", Stern tube: 2-1/2" from LASDROP SHAFT SEALS $199.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-112-212
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 1-3/4", Stern tube: 2-5/8" from LASDROP SHAFT SEALS $234.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-134-258
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 1-1/8", Stern tube: 1-1/2" to 1-3/4" from LASDROP SHAFT SEALS $154.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-118-134
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 3", Stern tube: 6" from LASDROP SHAFT SEALS $549.00 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-300-6
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 1-3/4", Stern tube: 3-3/4" from LASDROP SHAFT SEALS $259.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-134-334
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 2-1/4", Stern tube: 4-1/2" from LASDROP SHAFT SEALS $329.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-214-412
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 2-1/2", Stern tube: 3-3/4" from LASDROP SHAFT SEALS $354.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-212-334
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 1-1/2", Stern tube: 3-1/2" from LASDROP SHAFT SEALS $214.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-112-312
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 2-3/4", Stern tube: 4" from LASDROP SHAFT SEALS $414.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-234-4
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 3/4", Stern tube: 2" from LASDROP SHAFT SEALS $132.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-034-2
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 1-3/4", Stern tube: 4-1/2" from LASDROP SHAFT SEALS $259.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-134-412
	LASDROP SHAFT SEALS Dry-Seal Shaft Seal, 1-3/4", Stern tube: 2-3/4" from LASDROP SHAFT SEALS $234.99 USD Add to Project List	Engine Systems -> Propellers & Drive Trains->Dry-Seal Shaft Seal As in all Lasdrop seals, the unit incorporates a cutlass bearing in the housing to keep the unit properly aligned with the shaft. Available in shaft sizes 3/4" to 8", accommodating any size stern tube up to 10-1/2" in diameter. Metric sizes available. Also an excellent rudder shaft seal. Seal housing constructed of a durable copolymer with built in cutlass bearing ensuring proper alignment to the shaft. Optional Back-up seal rotates with the shaft until replacement is needed. Part No: D-134-234


Company History Mission Statement Press Room Careers at West Marine Affiliate Program Annual Catalog Store Locator And More...	Stock Price Press Releases SEC Filings Email Alerts Analyst Coverage Management Team Financial FAQ And More...	Terms Of Use Returns/Exchanges Privacy Policy Contact Us Site Map Annual Catalog Product Recalls And More...

Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11

View categories by:

Title | Manufacturer | Price