|
|
250V from MARINCO, 250V) from MARINCO, 125V) from MARINCO
|
|
Home -> Electrical -> Shore Power -> Electrical Cordsets->50A PowerCord PLUS® Cordsets
Vinyl molded watertight plug and connector. Easy-to-grip contour ends with LED Power Indicator Light. Outdoor use, vinyl jacketed 6-gauge/4-conductor cable. Features: LED power indicator light, contour grip ends, thumbprint locator . Amperage/Voltage Rating: 50A, 125/250V . Blade Style: Locking/Four Wire/NEMA SS-2 . Material: Vinyl .
Part No: 6152SPPW
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->ConnectPro Trolling Motor Plug & Receptacle
Vibration-resistant, 12V trolling motor connectors incorporate a locking plug and waterproof “O” ring seal for a superior connection for 12V, 24V, 36V and combination systems.
Part No: 12VCP
|
|
|
|
Home -> Electrical -> Shore Power
A locking receptacle for shore powerAccepts locking plugs like Marinco #305CRP.
Part No: 305CRR
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->Y-Adapters
Y-adapters let you split one shore power outlet between two power cords (You’re still limited to the rated amperage of the outlet. ) All Y adapters are locking and equipped with covers and sealing collars.
Part No: 153AY
|
|
|
|
Home -> Electrical -> Shore Power->15Amp, 125V Straight Blade Components
High-grade, marine-quality and corrosion-resistant. Two-pole, 3-conductor, grounding devices.
Part No: 5266CR
|
|
|
|
Home -> Electrical -> Shore Power->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6351EL
|
|
|
|
Home -> Electrical -> Shore Power
The 50A shorepower systems are offered in 125V, 3-conductor pole, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure you order matching components, as they are not interchangeable (except covers). Yellow, moisture resistant vinyl cover . Features a moisture resistant seal with Lexan® ring. Fits over connectors # 203703 and # 237214 . Mates to # 229724, # 390625 and # 421893 inlets. Highly ozone- and UV-resistant.
Part No: 7715CRN
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets
Box is yellow fiberglass. Two 3/4" knock-out holes. . Accepts all 30A, 125V; 50A, 125V and 50A 125/250V receptacles. Accepts 7420CR and 7788CR weatherproof covers.
Part No: 6083CR
|
|
|
|
Home -> Electrical -> Shore Power
20A 125V locking type male connector.
Part No: 205CRPN
|
|
|
|
Home -> Electrical -> Shore Power -> Phone & TV Wiring
Marine locking connector at one end and a modular phone jack receptacle at the other.
Part No: PH6600
|
|
|
|
Home -> Electrical -> Shore Power->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6369CR
|
|
|
|
Home -> Electrical -> Shore Power->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 500R
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Outlets & Plugs->ConnectPro Trolling Motor Plug & Receptacle
Vibration-resistant, 12V trolling motor connectors incorporate a locking plug and waterproof “O” ring seal for a superior connection for 12V, 24V, 36V and combination systems.
Part No: 12VBP
|
|
|
|
Home -> Electrical -> Shore Power -> Phone & TV Wiring->Television Cable
Standard 75ohm, RG59-U with slip-on connection and heavy-duty boots on both ends.
Part No: TV99
|
|
|
|
Home -> Electrical -> Shore Power->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6361CRN
|
|
|
|
Home -> Electrical -> Shore Power -> Electrical Cordsets
Keep your 30A shore power cords organized and out of the water with these clips that quickly and easily attach to your boat’s tube or wire rails. Or use to hang fishing rods, buckets, or other accessories. Made of virtually unbreakable, UV-stable material.
Part No: CLIP-01
|
|
|
|
Home -> Electrical -> Shore Power -> Electrical Cordsets->30A PowerCord PLUS® Cordsets
The new standard for shore power cordsets! The 125V Marinco PowerCord PLUS cordset, newly packaged exclusively for West Marine, includes a standard threaded ring for hook-up option to ordinary threaded inlets. Marine-grade yellow #10 AWG 3-conductor wire. Also includes combined features you won't find on other power cords, including: LED Power Indicator Lights: When it glows red, you know you have power. Contoured Grip Ends: Molded to fit your hand.
Part No: 199120
|
|
|
|
Home -> Electrical -> Shore Power->Shore Power Pigtail Adapters
Short jumper cord for wet locations Water-resistant adapters are fully molded, include sealing covers, and look like very short shore power cordsets. Recommended for use in wet locations. Pigtail adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. All components are covered by Marinco’s five-year warranty.
Part No: 117A
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->Shore Power One-Piece Adapters
Marinco straight adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. They are integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications.
Part No: 84A
|
|
|
|
Home -> Electrical -> Shore Power->Shore Power Pigtail Adapters
Short jumper cord for wet locations Water-resistant adapters are fully molded, include sealing covers, and look like very short shore power cordsets. Recommended for use in wet locations. Pigtail adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. All components are covered by Marinco’s five-year warranty.
Part No: 105A
|
|
|
|
Home -> Electrical -> Shore Power -> Phone & TV Wiring->Television Cable
Standard 75ohm, RG59-U with slip-on connection and heavy-duty boots on both ends.
Part No: TV99-25
|
|
|
|
Home -> Fishing -> Trolling Motors->Trolling Motor Wiring Accessories
.
Part No: 2018BR
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->Y-Adapters
Y-adapters let you split one shore power outlet between two power cords (You’re still limited to the rated amperage of the outlet. ) All Y adapters are locking and equipped with covers and sealing collars.
Part No: 165AY
|
|
|
|
Home -> Electrical -> Shore Power->Shore Power Pigtail Adapters
Short jumper cord for wet locations Water-resistant adapters are fully molded, include sealing covers, and look like very short shore power cordsets. Recommended for use in wet locations. Pigtail adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. All components are covered by Marinco’s five-year warranty.
Part No: 110A
|
|
|
|
Home -> Electrical -> Shore Power
A grounded AC inlet for use with Guest onboard chargers. It provides quick extension cord connection without opening covers or hatches. Keeps wiring off decks.
Part No: 150BBI
|
|
|
|
Home -> Electrical -> Shore Power -> Electrical Cordsets->30A PowerCord PLUS® Cordsets
The new standard for shore power cordsets! The 125V Marinco PowerCord PLUS cordset, newly packaged exclusively for West Marine, includes a standard threaded ring for hook-up option to ordinary threaded inlets. Marine-grade yellow #10 AWG 3-conductor wire. Also includes combined features you won't find on other power cords, including: LED Power Indicator Lights: When it glows red, you know you have power. Contoured Grip Ends: Molded to fit your hand.
Part No: 199119
|
|
|
|
Home -> Electrical -> Shore Power -> Electrical Cordsets->30A PowerCord PLUS® Cordsets
The new standard for shore power cordsets! The 125V Marinco PowerCord PLUS cordset, newly packaged exclusively for West Marine, includes a standard threaded ring for hook-up option to ordinary threaded inlets. Marine-grade yellow #10 AWG 3-conductor wire. Also includes combined features you won't find on other power cords, including: LED Power Indicator Lights: When it glows red, you know you have power. Contoured Grip Ends: Molded to fit your hand.
Part No: 199116
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Manufactured from corrosion resistant marine grade materials with a unique interconnecting system that securely locks the plug into the receptacle resulting in a positive and moisture proof connection. Heavy duty cable/18 gauge wire. Watertight caps. Plug features an LED indicator light, moisture proof sealing ring, strain relief and built-in 10A fuse. SeaLink locking system. Works with any standard 12V plug and receptacle.
Part No: 12VAD
|
|
|
|
Home -> Electrical -> Shore Power->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 510R
|
|
|
|
Home -> Electrical -> Shore Power->Shore Power Pigtail Adapters
Short jumper cord for wet locations Water-resistant adapters are fully molded, include sealing covers, and look like very short shore power cordsets. Recommended for use in wet locations. Pigtail adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. All components are covered by Marinco’s five-year warranty.
Part No: 123A
|
|
|