Top Sellers
Splash Zone Epoxy, #788 2GA KT from Z-SPAR COATINGS
Excellent for underwater application788 Splash Zone Epoxy Formulation: Two-part epoxy patching compound . Recommended Usage: Patching and repairing wet, damaged surfaces . Drying: One-hour working time. Four-hour set time.
|
Splash Zone Epoxy, #788 2QT KT from Z-SPAR COATINGS
Excellent for underwater application788 Splash Zone Epoxy Formulation: Two-part epoxy patching compound . Recommended Usage: Patching and repairing wet, damaged surfaces . Drying: One-hour working time. Four-hour set time.
|
Git Rot Penetrating Epoxy - 32 OZ Kit from BOAT LIFE
Easy-to-use epoxy rescues dry-rotted wood from oblivionSoaks into wood fibers and restores strength to rotten sections. By drilling small holes into fiberglass laminations, underlying wood can be saturated and much of its original strength can be restored. Can be sanded, painted, drilled, tapped and is compatible with most sealants and paints. Recommended Usage: Inject into dry-rotted wood, wood deck or hull cores. Coverage: Volume required for saturation—about half the volume of rotted wood.
|
G/Flex 655 Resin 4.75 Gal. from WEST SYSTEM
G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods.
|
G/Flex 650 Hardener 4.75 Gal. from WEST SYSTEM
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/flex offers these important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. .
|
Marine-Tex Putty, Gray, 14oz. from TRAVACO
Versatile epoxy putty for wide variety of repairs Repairs damaged hulls and equipment stronger than before. Fixes gel coat chips and leaks in fuel tanks, water tanks, piping, engine blocks, cracked crank cases, etc. Can be used in working temperatures of -40° to 250°F. Marine-Tex bonds to all metals, plastics, plywood, etc. Handles like putty. Formulation: Two-part epoxy putty . Recommended Usage: Bonds to aluminum, PVC, fiberglass, most plastics, metals, glass, cement and hard/soft woods .
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
Resin Coloring Agent - Admiral Blue from EVERCOAT
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
|
Fiberglass Cloth - Density (6 OZ), 60"W, Bulk from WEST MARINE
Suitable for a wide variety of building jobsMedium-density (6oz. ) E-glass. Use with polyester or epoxy resin for light building jobs, covering large areas or reinforcement when laying up or repairing a damaged area. Most commonly used fabric for repair and light building jobs. Medium-density (6oz. ) fiberglass cloth is ideal for covering large areas.
|
#810 Fillable Caulking Tubes from WEST SYSTEM
These applicators are great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Large-volume applicators for use with a standard caulking gun. . Suitable for refilling during continuous use. Should be disposed of after epoxy cures. . Holds approximately 10 fl. oz. . Package of 2.
|
Resin Coloring Agent - Brown from EVERCOAT
Match colors like a pro with these coloring agentsFor use with polyester or epoxy resins, fillers, or putties. These tints also work well with nonskid coatings. Use with West Marine Gel Coat or Evercoat Polyester Gel Paste.
|
Hullgard Primer Converter, Qt. from AWLGRIP
Hullgard Epoxy Primer is a holding primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. Suitable for below the waterline only, it offers a long overcoating interval without sanding to reduce work time along with superb adhesion to properly prepared fiberglass, steel, aluminum and wood. Can be recoated as soon as the solvents evaporate, even at low temperatures. 1 Gal. Theoretical Coverage – 140 Sq. 5 mils/135 microns DFT or 360 Sq.
|
Marine Structural Filler - Quart from WEST MARINE
Great for fiberglass and sheet metal ding repairsFiberglass filler with long strand reinforcing fibers for fiberglass and sheet metal repairs. Water-resistant. Hardener included. Great for quick and easy ding repair on fibergalss surfboards, sailboards, canoes and runabouts. Formulation: Polyester putty . Recommended Usage: Fiberglass and sheet metal repairs . Color: White.
|
Glasskoter Resin Roller Cover - 9" x 3/8" Nap from CORONA
For epoxy and polyester resinPhenolic core. Woven mohair. 3/8" nap for semi-smooth or 1/8" nap for fine finishes.
|
Replacement Handle, Y-Valve Diverter, Long Shaft -M-95 from GUZZLER/BOSWORTH
Simple and compact, with full-port openings that won’t restrict flow. Epoxy-coated aluminum handles and Delrin bodies.
|
|
Quart from MAS EPOXY, 1Quart from MAS EPOXY, Gluzilla from MAS EPOXY
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->Low Viscosity Resin
Low-Vis Resin offers some near-perfect features: EASY wet-out of your material, NO VOC's for a better environment, and NO BLUSH when you're done. Can be used in a huge variety of applications including boat hulls and structures which need to completely exclude moisture, as well as laminating and bonding of nearly all materials. Boasts a 600 cps viscosity . Reduced viscosity provides for complete wet out of fiber reinforced fabrics . Formulated from 100% low molecular weight reactive solids .
Part No: 30-002
|
|
|
|
Milled Fibers (1/32" milled fiberglass) For use when epoxy must fill a void and provide extremely high strength and resistance to cracking (i. e.
Part No: 25-005
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Wood Flour Filler
Wood Flour For use when a hard solid for filling and filleting is required.
Part No: 25-021
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
The assembly adhesive which also seals! Flex-Bond 5000 is the strong one-component adhesive and sealant with good adhesion to metallic surfaces even under the action of water. Thanks to the good initial tack, Flex-Bond 5000 permits uncomplicated and fast assembly. Safety Good adhesion to metallic surfaces even under the action of water. High temperature stability (from –40 °C to +100 °C). High UV stability. Aging resistance. Good resistance to water, cleaning agents, weak acids and alkalis.
Part No: 35-057
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Wood Flour Filler
Wood Flour For use when a hard solid for filling and filleting is required.
Part No: 25-020
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Gelcoat Repair Kits->Gelcoat Repair Kits
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
Part No: 95-742PS
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->FLAG Epoxy Resin
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.
Part No: FLAG064
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->MAS Medium Hardener
MAS Medium Hardener is a polyamine blend intended for moderate reactivity. We recommend this hardener when "overnight" sandibility is more important than continuous laminating and open time (as provided by MAS Slow Hardener) MAS Medium will also provide a beautifully smooth void free finish, with great resistance to milking out during application and fogging in critical clear coating applications. STORAGE LIFE: A minimum of 12 months in a sealed container at ambient temperatures.
Part No: 30-532
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
For small repairs and bonding; Perfect where only a small amount is needed. Small enough to keep on board, but enough epoxy to make most quick repairs! Kit includes: 16oz. Flag Epoxy Resin. 8oz. medium hardener. 10 mixing sticks. 4pr. gloves.
Part No: 30-FLAG
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->FLAG Epoxy Resin
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.
Part No: FLAG032
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Adhesives
A one-component, high-bond-strength, moisture-curing adhesive. Gluzilla is a high performance polyurethane (PUR) adhesive. It is 100% waterproof for wood, fiberglass, stone, metal, foam and 1000’s of other uses! These PUR systems have made a name for themselves in applications where other adhesives fail. USAGE: For the water- and weather-resistant bonding of wood, plastics, rock, metal, ceramics, insulation materials and concrete. Much higher temperatures can be tolerated for shorter periods .
Part No: 35-051
|
|
|
|
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
Part No: 30-016
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->MAS Fast Hardener
The low viscosity of Fast Hardener allows for quick wet-out of the heavy reinforcing fabrics often used in repair applications. Additionally, the superior bonding strength of Fast formulas is ideal for high strength secondary bonding applications such as structural tabbing and repair of laminations. The rapid cure time of Fast allows overnight curing in low temperature conditions. of formula unless rapid application techniques are incorporated. Always maintain a 2:1 ratio of resin : hardener.
Part No: 30-611
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->Low Viscosity Resin
Low-Vis Resin offers some near-perfect features: EASY wet-out of your material, NO VOC's for a better environment, and NO BLUSH when you're done. Can be used in a huge variety of applications including boat hulls and structures which need to completely exclude moisture, as well as laminating and bonding of nearly all materials. Boasts a 600 cps viscosity . Reduced viscosity provides for complete wet out of fiber reinforced fabrics . Formulated from 100% low molecular weight reactive solids .
Part No: 30-001
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->MAS Slow Hardener
When used in conjunction with MAS Epoxy Resin it provides high reactivity and an extended gel time which allows for controlled and extended application periods. Special features exhibited by this product include blush free surfaces, good ultraviolet stability, smooth finishes in cured films, excellent osmotic resistance, and the ability to cure under high humidity. The low viscosity of MAS Slow Hardener (200-250 poise) when mixed with MAS resin is ideal for fast wet-out of reinforcing fabrics.
Part No: 30-026
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Cell-O-Fill Filler
Derived from all natural alpha cellulose, the fibrous ribbons create a matrix with the epoxy and help reduce sagging and slumping. Used in place of Colloidal Silica, it will not billow in the air like silica and you will need half as much to create the same thickness.
Part No: 25-004
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Phenolic Micro Balloon Filler
Phenolic Micro Balloons (organic phenolic hollow spheres) For use when low density, light weight sandable paint-ready surfaces are required, i. e.
Part No: 25-007
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->FLAG Epoxy Resin
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.
Part No: FLAG1G
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->MAS Slow Hardener
When used in conjunction with MAS Epoxy Resin it provides high reactivity and an extended gel time which allows for controlled and extended application periods. Special features exhibited by this product include blush free surfaces, good ultraviolet stability, smooth finishes in cured films, excellent osmotic resistance, and the ability to cure under high humidity. The low viscosity of MAS Slow Hardener (200-250 poise) when mixed with MAS resin is ideal for fast wet-out of reinforcing fabrics.
Part No: 30-006
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->Low Viscosity Resin
Low-Vis Resin offers some near-perfect features: EASY wet-out of your material, NO VOC's for a better environment, and NO BLUSH when you're done. Can be used in a huge variety of applications including boat hulls and structures which need to completely exclude moisture, as well as laminating and bonding of nearly all materials. Boasts a 600 cps viscosity . Reduced viscosity provides for complete wet out of fiber reinforced fabrics . Formulated from 100% low molecular weight reactive solids .
Part No: 30-005
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->FLAG Epoxy Resin
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.
Part No: FLAG4G
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Phenolic Micro Balloon Filler
Phenolic Micro Balloons (organic phenolic hollow spheres) For use when low density, light weight sandable paint-ready surfaces are required, i. e.
Part No: 25-008
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->MAS Fast Hardener
The low viscosity of Fast Hardener allows for quick wet-out of the heavy reinforcing fabrics often used in repair applications. Additionally, the superior bonding strength of Fast formulas is ideal for high strength secondary bonding applications such as structural tabbing and repair of laminations. The rapid cure time of Fast allows overnight curing in low temperature conditions. of formula unless rapid application techniques are incorporated. Always maintain a 2:1 ratio of resin : hardener.
Part No: 30-612
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->MAS Medium Hardener
MAS Medium Hardener is a polyamine blend intended for moderate reactivity. We recommend this hardener when "overnight" sandibility is more important than continuous laminating and open time (as provided by MAS Slow Hardener) MAS Medium will also provide a beautifully smooth void free finish, with great resistance to milking out during application and fogging in critical clear coating applications. STORAGE LIFE: A minimum of 12 months in a sealed container at ambient temperatures.
Part No: 30-564
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Colloidal Silica
Fumed Colloidal Silica (also known as CAB-0-SIL) Use when an extremely hard solid with high density is needed, i. e. structural bonding, filling and filleting. Add strength to a top coat by using a small amount of Colloidal Silica ( about a tablespoon per 4 ounces). This will add strength and finish absolutely clear.
Part No: 25-001
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Gelcoat Repair Kits
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
Part No: 95-743PS
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->MAS Slow Hardener
When used in conjunction with MAS Epoxy Resin it provides high reactivity and an extended gel time which allows for controlled and extended application periods. Special features exhibited by this product include blush free surfaces, good ultraviolet stability, smooth finishes in cured films, excellent osmotic resistance, and the ability to cure under high humidity. The low viscosity of MAS Slow Hardener (200-250 poise) when mixed with MAS resin is ideal for fast wet-out of reinforcing fabrics.
Part No: 30-007
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->MAS Medium Hardener
MAS Medium Hardener is a polyamine blend intended for moderate reactivity. We recommend this hardener when "overnight" sandibility is more important than continuous laminating and open time (as provided by MAS Slow Hardener) MAS Medium will also provide a beautifully smooth void free finish, with great resistance to milking out during application and fogging in critical clear coating applications. STORAGE LIFE: A minimum of 12 months in a sealed container at ambient temperatures.
Part No: 30-516
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Rapid Cure Epoxy Kits
Mas's ONLY 1:1 ratio epoxy adhesive -- This stuff is FAST!! It's great for quick repairs and bonding. Mix small amounts - no more than 1/2 oz. of each of the resin and hardener at a time. You'll have 1-2 minutes to use it, and 5-10 minutes to set it. You can sand in 1 hour, and full cure is in 4-6 hours. Be Careful - this is FAST, PERMANENT, and WATERPROOF. The MINI, 8 oz. kits are great for keeping on board or at home in the tool kit. Useful for quick kayak and canoe - or home - repairs.
Part No: 30-100
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->MAS Fast Hardener
The low viscosity of Fast Hardener allows for quick wet-out of the heavy reinforcing fabrics often used in repair applications. Additionally, the superior bonding strength of Fast formulas is ideal for high strength secondary bonding applications such as structural tabbing and repair of laminations. The rapid cure time of Fast allows overnight curing in low temperature conditions. of formula unless rapid application techniques are incorporated. Always maintain a 2:1 ratio of resin : hardener.
Part No: 30-666
|
|
|