Top Sellers
Water Spike Anchor, 22'-35' from MARINETECH PRODUCTS
WaterSpike will hold tightly on the lake bottom and release just as easy. The number one anchor used by professional anglers, the WaterSpike is the last anchor you will ever own. For boats 22-35 feet. . Incredibly light weight. Only 16lbs! . Unmatched holding power in hard or soft bottoms. . Unique Sliding Ring design guarantees release everytime. . Completely collapsible for easy storage.
|
30lb. River Anchor from GREENFIELD PRODUCTS
Combines the features of a traditional mushroom anchor with flukes for better bottom penetration. PVC coating is easy to clean and won’t scuff your boat. Recommended for use in protected inland waters only.
|
Anchor Buddy Mooring Line, Blue from GREENFIELD PRODUCTS
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.
|
Anchor Buddy Mooring Line, Black from GREENFIELD PRODUCTS
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.
|
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
PVC Coated Chain, Red, 1/4" x 4' from GREENFIELD PRODUCTS
Galvanized, proof-coil anchor chain is PVC coated to protect boat surfaces. Specially formulated PVC offers excellent flexibility and durability.
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
303 Aerospace Protectant - Pint from 303 PRODUCTS
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
|
Mushroom Anchor, 8lb., Black from GREENFIELD PRODUCTS
The ideal size and weight for skiffs, canoes, inflatables and other small boats in calm waters.
|
303 High Tech Fabric Guard, Pint from 303 PRODUCTS
Excellent protectant for Sunbrella upholstery and breathable foul weather gear The only repellency product recommended by and for Sunbrella. Restores lasting water repellency to marine canvas. Stops leaks and protects against soiling and water and oil-based stains. Resists mildew formation and UV sun damage. Spray on, let dry. One pint treats 75–100 square feet of marine canvas. Also a great choice for fabric upholstery, carpeting and breathable foul-weather gear.
|
Wet/Dry Sandpaper (AO) - P500A-Grit from 3M PRODUCTS
3M Imperial Wetordry Sanding Sheet, 9" x 11" Used in wet sanding, fine featheredging or last final sanding step before priming. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product. 500G.
|
101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
|
Rubrail Insert - for Style #6, Model 341100 from TACO PRODUCTS
Rubber inserts add cushioning to your aluminum rubrails. . These fit styles #5, #6 and #7. Rub rails and inserts sold separately. .
|
36" Stabilizer for 30'+ Boat Size from MAGMA PRODUCTS
This proven, hinged wing design operates without noisy flapper valves for quiet anchoring day and night. Sailors can easily suspend the stabilizer from their boat’s boom or spinnaker pole. Powerboaters can deploy it with the optional telescoping, aluminum outrigger. The outrigger includes Dacron support lines, a soft rubber hull pad, and an anodized mounting boot. Stabilizer includes bridle and storage/carry case. Stabilizer measures 36" x 21" when fully open, which creates 756sq.
|
Chafe Tape from 3M PRODUCTS
Adhesive-backed cloth chafe tape is made to wrap thimbles, docklines, and other points subject to wear.
|
|
Anchor from MARINETECH PRODUCTS, 6" from MARINETECH PRODUCTS
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Water Spike Anchor
WaterSpike will hold tightly on the lake bottom and release just as easy. The number one anchor used by professional anglers, the WaterSpike is the last anchor you will ever own. For boats 22-35 feet. . Incredibly light weight. Only 16lbs! . Unmatched holding power in hard or soft bottoms. . Unique Sliding Ring design guarantees release everytime. . Completely collapsible for easy storage.
Part No: 55-9200
|
|
|
|
Home -> Engine Systems -> Steering Systems->Auxiliary Steering Kits for Trolling Motors - Zinc Rod
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
Part No: 55-2400
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Knives->Rope Cutter Gun
Cut and seal synthetic rope in secondsThe best way to prevent nylon rope from fraying is to melt the ends, but everyone who has done it knows it's a slow, messy, smelly operation that often results in flaming drips and burnt fingers. Instead use this handheld heat gun cuts and seals the ends of synthetic rope in one quick operation. Runs on 120V AC. 4.
Part No: 75-7061
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim
Up to 3. 5" of vertical lift for your engineThe interlocking tongue and groove patented design provides added strength and durability. Great for bass boats, aluminum boats, flats, skiff and walleye boats. Rated for engines to 300hp. Provides 3.
Part No: 600SS
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Anchor Line->Anchor Rodes
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.
Part No: 75-7000
|
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Anchor Line->Anchor Rodes
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.
Part No: 75-7010
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Auxiliary Steering Kits for Trolling Motors - Zinc Rod
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
Part No: 55-2600
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim
Heavy-duty bracket gives automatic trim and tilt with the push of a buttonThis trim and tilt is designed specifically for the weekend fisherman. The Model 40 is a heavy duty fabricated aluminum bracket. It will hold 2- and 4-stroke motors up to 150lb. Its powerful electro-mechanical actuator provides automatic trim and tilt with the push of a button. Bracket comes with electrical relay and 2 button switch (12ft cord). 8" setback.
Part No: 55-0040
|
|
|
|
|
Home -> Engine Systems -> Steering Systems->Auxiliary Steering Kits for Trolling Motors - Zinc Rod
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
Part No: 55-2750
|
|
|
|
Home -> Anchor & Docking -> Anchors->Chrome Sand Spike Anchor
An alternative to more expensive beach and land anchoring devicessimply push this rod into the ground, or use a hammer in firmer soils and attach an anchor line to the attachment loop.
Part No: 55-9600
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim
The only jack plate you can adjust from inside the boat with only one screwThe only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
Part No: wrench-001
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Knives->Rope Cutter Gun
Cut and seal synthetic rope in secondsThe best way to prevent nylon rope from fraying is to melt the ends, but everyone who has done it knows it's a slow, messy, smelly operation that often results in flaming drips and burnt fingers. Instead use this handheld heat gun cuts and seals the ends of synthetic rope in one quick operation. Runs on 120V AC. 4.
Part No: 75-7060A
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim
Keep engine centered during traileringHelps keep engine centered during trailering. Snaps over outboard's hydraulic steering and cylinder rods.
Part No: HYCL-001
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.->Electrosteer T4
Imagine being able to steer your boat—from anywhere aboard— at the push of a button. Well, now you can with the Electrosteer T4. This amazing electronic remote steering device attaches directly to your transom with no holes to drill in your boat. Stainless steel drive rod and steering rod communicate via 24' quick-disconnect cables to the remote control panel. It's so easy! . For an even simpler configuration, upgrade to the Wireless Remote option and control your Electrosteer cablefree.
Part No: 55-0105
|
|
|
|
|
Home -> Anchor & Docking -> Anchors->Chrome Sand Spike Anchor
An alternative to more expensive beach and land anchoring devicessimply push this rod into the ground, or use a hammer in firmer soils and attach an anchor line to the attachment loop.
Part No: 55-9500
|
|
|
|
Home -> Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-3500
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line->Tabletop Hot Knife
Designed for professional, heavy-duty use. We use this rope knife in our stores. On/Off rocker switch glows when On.
Part No: 75-7070A
|
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.->Electrosteer T4
Imagine being able to steer your boat—from anywhere aboard— at the push of a button. Well, now you can with the Electrosteer T4. This amazing electronic remote steering device attaches directly to your transom with no holes to drill in your boat. Stainless steel drive rod and steering rod communicate via 24' quick-disconnect cables to the remote control panel. It's so easy! . For an even simpler configuration, upgrade to the Wireless Remote option and control your Electrosteer cablefree.
Part No: 55-0103
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim->Hydraulic All-in-One Jacking Plates
Patented design utilizes stainless steel support rods instead of the typical design with aluminum rods rubbing against UHMW or other plastic-type composites. All-in-One jack plates are laboratory tested to exceed 65 tons of sheer. Exclusive bronze oil-lite bushings with zerk grease fittings and dual wipers keep salt, sand, and silt off stainless rods. Two control system/switch options: OBD models include instrument panel mounted rocker switch control. Rated for engines to 300hp (or 625lbs. ).
Part No: OBD600
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim->Hydraulic All-in-One Jacking Plates
Patented design utilizes stainless steel support rods instead of the typical design with aluminum rods rubbing against UHMW or other plastic-type composites. All-in-One jack plates are laboratory tested to exceed 65 tons of sheer. Exclusive bronze oil-lite bushings with zerk grease fittings and dual wipers keep salt, sand, and silt off stainless rods. Two control system/switch options: OBD models include instrument panel mounted rocker switch control. Rated for engines to 300hp (or 625lbs. ).
Part No: OEZ600
|
|
|
|
|
Home -> Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-5501
|
|
|
|
|
Home -> Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-0165
|
|
|
|
|
Home -> Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-1165
|
|
|
|
|
Home -> Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-5201
|
|
|
|
|
Home -> Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-5200
|
|
|
|
|
Home -> Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-5500
|
|
|
|
|
Home -> Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-1110
|
|
|
|
|
Home -> Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-0110
|
|
|
|
Home -> Fishing -> Trolling Motors
This two-blade prop is designed specifically for Navigator trolling motors for maximum performance and durability in weeds, shallows and other tough conditions. Made of heavy-duty plastic.
Part No: 65-8302
|
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim->Hydraulic All-in-One Jacking Plates
Patented design utilizes stainless steel support rods instead of the typical design with aluminum rods rubbing against UHMW or other plastic-type composites. All-in-One jack plates are laboratory tested to exceed 65 tons of sheer. Exclusive bronze oil-lite bushings with zerk grease fittings and dual wipers keep salt, sand, and silt off stainless rods. Two control system/switch options: OBD models include instrument panel mounted rocker switch control. Rated for engines to 300hp (or 625lbs. ).
Part No: OEZ800
|
|
|
