Top Sellers
Body Width 2", Vertical Clearance 1", Shackle Diameter 5/16" from ABUS LOCK COMPANY
Set your own easy-to-remember combination on these padlocks with four-pin tumblers. You set the combination using the key provided. All brass internal components and a stainless steel shackle for superior corrosion protection. Type: Combination . Combination Type: Reset-able four tumbler . Material: Brass body and internal components, solid stainless shackle .
|
3.9cubic feet Coolmatic Refrigerator from WAECO ADLER BARBOUR
Detachable cooling unit with 5‘ supply line, fully hermetic Danfoss BD35F compressor with integrated control electronics, low-voltage protection for consumer or starter battery, electronic fuse/automatic reverse pole protection, dynamically ventilated lamellar condenser, aluminum rollbond evaporator, mechanic, continuously variable thermostat. 3. 94 cubic feet . 12/24 volts DC . 45 watts . 52 lbs . 20. 5” W x 29. 12”H x 22”D . CFC-free polyurethane insulation.
|
|
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Non-Locking Flush Lock - Chrome/White with Offset Cam Bar from PERKO
Non-Locking chome plated zinc alloy and white plastic with offset adjustable cam bar. Detents indicate open or closed position. Door thickness: 1/4" to 1-1/8" . Face plate dimensions: 2-1/2" x 2-1/2" . Adjustment latch bar: 3/8" to 3" .
|
Flip Lock Drain Plug 1" Stainless from SEAFIT DRAIN
Standard rubber and brass plug fits 1" transom drains on many production boats.
|
ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.
|
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
Stainless-Steel Fender Lock from TAYLOR
The "one-way" locking peg provides secure and reliable mounting and allows the use of up to 1/2" diameter line.
|
Adjustable Height Standard Friction Lock Pedestal Seat, Ribbed Series from GARELICK
Seat raises or lowers, locks at desired height . 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate . Anodized protective finish helps prevent saltwater corrosion and weathering. . 2-7/8" (7cm) diameter ribbed stanchion tube, 9.
|
Latch, Black, Locking from TEAK ISLE
Highly-polished stainless steel or plastic . 2 3/8" outside diameter. 1/2" cutout, 3/4" thickness.
|
Extra Peg for Standard Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
|
Nibo Quick Dog, Right-Locking with Hardware from BOMAR
With these spare parts for your Nibo or Gray hatch, you can replace worn or damaged parts for a fraction of the cost of replacing the hatch. Low-Profile Gasket in a 9' length. 9/16" Gasket in a 10' length. Available for the 100 series: Riser Arm Male Hatch Knob Female Hatch Knob. Hatch Tiedown Dog. Left-Locking Quick Dog.
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Push-Lock Slam Latch with Finger Pull from SOUTHCO
For glove box and small door applications where security is needed. Built to withstand harsh marine conditions, this latch is constructed of durable hybrid polymer and stainless steel. Mounts easily in a 1" cutout. Maximum working load: 120 lbs.
|
|
Brass from MASTER LOCK, Coupler Lock, Trailer Hitch Lock from MASTER LOCK
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
An internal O-ring and water tight cap protect this lock from moisture and dirt. Stainless-steel, universal design fits 5/8" and 1/2" receivers. Operates easily by turning the key 90° to lock or unlock. Solid brass key cylinder and cylinder case offer extreme corrosion resistance.
Part No: 1480DAT
|
|
|
|
The hex drive on the top of the E-Z mount hitch ball provides easy installation without damaging the ball surface. A more secure fit in the coupler is achieved since the domed hex fills out the void that is left by a standard flat topped hitch ball.
Part No: 99M 2811DATSC
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
1-9/16" (40mm) wide body . 4 pin tumbler security . Hardened steel shackle . Solid brass lock body is stylish and strong .
Part No: 140T
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Designed for challenging outdoor conditions. 1-9/16" W laminated steel body with thermoplastic shell withstands elements. Shell prevents lock from scratching other surfaces. Dual-locking hardened 3/8" dia. steel shackle has a 1" clearance.
Part No: 312D
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Locks->2" Solid Brass Combination Padlock
Set your own combination for easy recall. . Corrosion-resistant solid brass case. . Hardened steel shackle. Shackle: dia. 5/16".
Part No: 175BSDSPT
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
Fits 1 7/8", 2", and 2 5/16" couplers manufactured by Reese, Fulton, Valley, Atwood, Shelby, Putnam, Hammerblow, Dutton Lainson, and UFP.
Part No: 379DAT
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers
Trailer coupler pivot lock latch safety pin. 9/32" diameter, pin has attachment ring on the end of a 6" cable. Chrome plated finish resists corrosion. Use ring to attach cable to coupler. Slide coupler latch pin through coupler hole. Pivot until perpendicular with coupler latch and slide into locked position.
Part No: 1491DATSC
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
360° swiveling lock allows you to access hard to reach or recessed receivers. Constructed of chrome-plated steel and treated with weather-tough seal to provide maximum corrosion resistance.
Part No: 2866DAT
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers->Pivot Lock Hitch Pins
Easy to install and take off because they rotate and lock in both directions.
Part No: 1465DAT
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
Fits 5/8", 1", and 2" wide couplers Stainless steel.
Part No: 2847DATSC
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
It allows you to accurately level your tow vehicle and trailer for safer towing, better trailer tracking and much less sway causing your vehicle to handle better. The ball mount can be easily adjusted with a 7/8" wrench or 3/8" square ratchet drive—even while the trailer is loaded on the ball. Ball mount height is automatically retained by a patented spring clip feature or simply record the ball mount height from its height reference marks. Capacity: 5,000lb. tongue weight.
Part No: 2841AT
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
Package includes a Coupler Lock, Barbell Receiver Lock (5/8" and 1/2") and an Adjustable Coupler Latch Lock all keyed alike, in a handy storage case. The Coupler Lock is die cast zinc, universal design and fits most 1 7/8" & 2" couplers. The Receiver Lock is a universal design that fits both 5/8" and 1/2" receivers.
Part No: 3774DAT
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Four-pin tumbler security in this 1-3/16"w brass lock. Features 3/16" dia. steel shackle with 5/8" clearance.
Part No: 130D
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers->Trailer Hitch Lock
Prevent trailer tow-away theft with these premium corrosion-resistant locks. They resist picking and prying and are easy to install and remove. The lock is located on the front for easy accessibility.
Part No: 377DAT
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Locks->2" Solid Brass Combination Padlock
Set your own combination for easy recall. . Corrosion-resistant solid brass case. . Hardened steel shackle. Shackle: dia. 5/16".
Part No: 175D
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
Locks the coupler handle and prevents theft of hitched or unhitched trailer. Shackle guard shields it from hacksaws and bolt cutters.
Part No: 37D
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers->Trailer Hitch Lock
Prevent trailer tow-away theft with these premium corrosion-resistant locks. They resist picking and prying and are easy to install and remove. The lock is located on the front for easy accessibility.
Part No: 378DAT
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers->Pivot Lock Hitch Pins
Easy to install and take off because they rotate and lock in both directions.
Part No: 1492DAT
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
Get maximum protection for your unattended trailer with this Receiver Lock and Adjustable Coupler Latch Lock Package. Both locks are pick resistant and resist rust, corrosion and clogging. Receiver Lock is a bent pin lock that fits 5/8" and 1/2" receivers. It's hardened steel shackle offers a maximum cut resistance.
Part No: 2848DATSC
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Three-pin tumbler security in this 3/4"w brass lock. Features 5/32" dia. steel shackle. Four-pack of keyed alike locks.
Part No: 120Q
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Trailer Winches
capacity 12V winch with a unique mounting plate that allows you to temporarily or permanently mount it on any flat surface or ball mount. Features a powerful rack and pinion gear design and is a good choice for boats up to 18'. Built-in carry handle. Includes 20' battery cable, toggle remote, back-up hand crank and hook with safety latch. Line speed: 6 fpm. Volts: 12V DC. Lift Capacity: 2,000lb. Boat Length: Up to 18'. Cable/Strap: 30'L steel. Construction: High-impact plastic housing .
Part No: 2953AT
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
2" (51mm) Solid Brass Trailer Hitch Coupler Lock Solid brass body . Case hardened steel shackle . Lock design protects shackle from cutting and sawing . Precision pin tumbler mechanism resists picking .
Part No: 605DAT
|
|
|
|
Home -> Engine Systems -> Motor Mounts
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting.
Part No: 430-DSPT
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Lifetime guarantee against rust! . Chrome-plated hardened steel shackle with a Corrozex™ finish for lifetime rust protection. . 1 9/16”W laminated steel body for superior strength with a 1 1/8” dia. shackle for additional clearance. . A four-pin cylinder helps prevent picking and a covered keyhead adds security. . Model 380D. . Ship 1 lb.
Part No: 380D
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
1-9/16" (40mm) wide laminated steel body for superior strength . High-tech thermoplastic shell designed to withstand the elements . Hardened steel shackle with molded cover . Exciting, colorful outdoor protection . Matching colored keyhead for added convenience . Ideal for all outdoor applications .
Part No: 312TRI
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
Installs fast without scratching This 2" hitch ball installs and tightens up quickly with a single wrench when used on Master Lock's One-Tool-Torque ball mounts with no risk of scratching the ball's mirror surface. Also works with Master Lock's Locking Hitch Ball Mount and most other manufacturer's ball mounts.
Part No: 3455DAT
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers->Pivot Lock Hitch Pins
Easy to install and take off because they rotate and lock in both directions.
Part No: 1495DAT
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
Stop worrying. The trailer is locked onLocking ball mount offers towing security and theft prevention with no need for a pin or hitch lock. Pins and shell are housed inside the corrosion resistant, powder-coated ball mount. Long lasting stainless steel lock cylinder. 35,000lb. rating exceeds. Class III requirements. Fits all 2" hitch receivers.
Part No: 3489ATSC
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
Prevent trailer tow-away theft with these premium corrosion-resistant locks. They resist picking and prying and are easy to install and remove. The lock is located on the front for easy accessibility.
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Trailer Winches
Vinyl coated to prevent scratching. Flexibility for convenience. Steel cable for strong cut resistance. Strong loops for use with Master® lock padlocks. Lifetime manufacturer's warranty . Outside diameter of coated cable: 5/16".
Part No: 68D
|
|
|