Welcome! Please Sign-In
Top Sellers
Chromed Zamak Cowl Vent from ATTWOOD
Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
Stern Three-Mile LED Light from ATTWOOD
Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.
800gph Tsunami Bilge Pump, 2.5A @ 12V DC Draw, 3/4" Port, 4-3/8"H x 3-1/2"W from ATTWOOD
800gph Tsunami Bilge Pump, 2.5A @ 12V DC Draw, 3/4" Port, 4-3/8"H x 3-1/2"W from ATTWOOD
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.
Tsunami T800 Cartridge Head, 12V, 36" Wire from ATTWOOD
Tsunami T800 Cartridge Head, 12V, 36" Wire from ATTWOOD
Interchageable, twist-and-lock cartridges reduce maintenance time and even enable an angler to switch cartridges between an aerator and bilge pump. The rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents.
P-Trap Fuel Surge Protector from ATTWOOD
P-Trap Fuel Surge Protector from ATTWOOD
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
Deluxe Windshield Washer Kit from AFI
Deluxe Windshield Washer Kit from AFI
Install your own windshield washer systemFits new or existing AFI Deluxe wiper arm and blade sets, with all the parts to outfit two wiper arms. The kit includes a 3 liter water tank with mounting bracket (8. 5"H x 7"W x 4. 5"D), 12V pump motor and 16' below deck clear tubing, 6' above deck black tubing, clips and sprayer fittings. You supply wiring, an in-line 3A fuse and On-Off momentary switch.
500gph 12V Bilge Pump, 1.9A Draw at 12V DC, 3/4" Port, 4"H x 2-3/8"W from RULE INDUSTRIES
500gph 12V Bilge Pump, 1.9A Draw at 12V DC, 3/4" Port, 4"H x 2-3/8"W from RULE INDUSTRIES
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.
5/16" Wire Rope Clamp from SEADOG
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
Capstan 1000 Rope Winch from POWERWINCH
Capstan 1000 Rope Winch from POWERWINCH
Versatile system uses an easy to operate foot switch to retrieve anchors or fishing pots or provide power assistance on limited crew sailboats. Solid, 1-piece, machined capstan features aluminum housing with stainless steel internal shafts and hardware. Deck mounted design saves space for rope locker. Mounting template included. Pulling Power: 1000lbs. Speed Up: 40'/min. Boat size: to 55' . Rope Type: 3-strand nylon. Draw: 27A @12v. Measure 6 5/16"H x 8"W x 10 9/16"L.
4-Cup 12V Coffee Maker from WARING
4-Cup 12V Coffee Maker from WARING
Enjoy fresh coffee ashore or afloat with this 4-cup coffee maker that plugs into any 12V outlet. Features include a durable stainless-steel carafe, dripless pour spout, knuckle guard, 30-minute auto shut off, “On” indicator light, and a convenient “Brew Pause” feature that lets you pour a cup of coffee before brewing has finished. Includes coffee scoop and three filters. 10 1/4"H x 5 1/4"W x 7 5/8"D.
Power Bubbles 12V DC Aerator from MARINE METALS
Power Bubbles 12V DC Aerator from MARINE METALS
This system runs on low current as it's dual bellows aerate up to 2L per minute of air. It saturates circulating water with oxygen. Double discharge allows aeration of one or two livewells. Increases flow capacity. Includes 10' of air tubing. Two large airstones allow the pump to be mounted in any protected area. Suitable for fresh or saltwater. Two anti-siphon valves protect pump against water intrusion. Quietly operates with solid-state circuits. Draw: 1/4A at 12V DC.
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
Vertical Sidelights, White from PERKO
Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
Fuel Line - 5/16" - Universal from MOELLER
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".

12V from ATTWOOD, 16" from ATTWOOD, Slider from ATTWOOD

10" Universal Bi-Color Pole Light, 3 Pins, 12V from ATTWOOD Home -> Electrical -> Exterior & Navigation Lighting->Universal Bi-Color Pole Lights
Based on Attwood’s popular Pulsar Pole Lights, these stowaway bi-color lights feature convenient universal plug-ins with locking collars that allow you to activate or remove the light quickly and easily—great for bass boats and flats boats with bow platforms.
Part No: 5095-10-7
60" Straight Pole All-Round Navigation Light from ATTWOOD Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->5500 Series LED All-Around Navigation Lights
Built to stand the test of time All-around pole lights feature articulating heads that adjust from 15° fore to 15° aft to fit all base angles and typical deck installations. Two-pin locking collar is removable to allow use in almost any base. 8 watts at 12V DC—one of the lowest power draws of any two-mile All-Round light on the market today! Rated for 50,000+ hours of use. 4'. Type: Universal replacement white all-around light . Case Material: Black plastic . Mounting Hardware: Not included .
Part No: 5530-60-7
Narrow Stainless-Steel Louvered Vent, 1/16" from ATTWOOD Home -> Ventilation -> Vents -> Interior Vents->Narrow Stainless-Steel Louvered Vents
Suitable for installation on any flat area of most contoured hulls. Constructed of all-welded 304 stainless with a polished finish. Vents for use with 3"ID ventilation systems and require a 1343 collector box. Install with #6 screws. Type: Louvered . Material: Stainless steel. Dimensions: 3"W x 16-7/8"L . Cutout Size: 2-7/16"W x 16-3/16"L .
Part No: 1499-5
36" Straight Pole All-Round Navigation Light from ATTWOOD Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->5500 Series LED All-Around Navigation Lights
Built to stand the test of time All-around pole lights feature articulating heads that adjust from 15° fore to 15° aft to fit all base angles and typical deck installations. Two-pin locking collar is removable to allow use in almost any base. 8 watts at 12V DC—one of the lowest power draws of any two-mile All-Round light on the market today! Rated for 50,000+ hours of use. 4'. Type: Universal replacement white all-around light . Case Material: Black plastic . Mounting Hardware: Not included .
Part No: 5530-36-7
Power Pedestal - Threaded Adjustable Post 24"-30" from ATTWOOD Home -> Seating & Covers -> Seating->Lock'N Pin 3/4" Pin Pedestal Systems
.
Part No: SP-3204-R-T
(G) Seat Mount - Wedge Style from ATTWOOD Home -> Seating & Covers -> Seating->Wedge Pedestal Systems
Designed to "wedge" together to prevent unintentional detachment, these components snap easily into the base for a snug, stable fit. Simply press the tab to release. Seat mount may be snapped directly into base for a lower profile while fishing, trailering, or covering your boat. Seat mounts swivel 360º. 2" systems are for use under 5 mph.
Part No: SP-18914
4-1/2" Open-Base Cleats (2), Four #8 Fasteners from ATTWOOD Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Mooring Cleats->Chrome-Plated Zinc Open-Base Cleats
Chrome-Plated Zinc Open-Base Cleats, sold in pairs.
Part No: 6244-6
C) Pedestal - Adjustable Post, Pin-Style Drop In from ATTWOOD Home -> Seating & Covers -> Seating->Lock'N Pin 3/4" Pin Pedestal Systems
.
Part No: SP-2244-ADJ
3/4IN 14 SS MESH STRAINER from ATTWOOD Home -> Fishing -> Fishing Accessories
Durable strainers to prevent debris from clogging baitwell drains and aerator pumps. Formed stainless steel wire mesh molded into black PVC plastic base. Applications: Fits Aerator Inlet and 3886-1 Thru-Hull.
Part No: 4232-7
Stowaway 24" All-Round Light from ATTWOOD Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Nav Lights - Reduced Glare Pole Lites
Attwood All-Round light provides 2-mile, 360° light visibility for boats up to 39. 4' (20m). Light features universal-fit locking collars that allow light to fit a variety of different Attwood and some Perko bases. 3/4" diameter aluminum pole. Includes 9-watt bulb. Case Material: Plastic Mounting Hardware: Fits most Attwood angled & straight 2- & 3-pin locking collar bases Volts: 12V Draw: 0. 66A Pole Material: Anodized aluminum Pole Length/Diameter: 24"L, 3/4"dia.
Part No: 5110-24-7
Plug-In Pole Light Replacement Base from ATTWOOD Home -> Electrical -> Exterior & Navigation Lighting->Navigation Lights - Stow-A-Way, All-Round Lights
Chrome Plated ZAMAK Base, Horizontal Deck Mount Base is constructed of die-cast ZAMAK with Perma-Plate® chrome finish. Swivel cover protects the socket when light is stowed away. Socket is keyed to prevent incorrect insertion of pole light. Includes 7-1/2" hard wire leads for connection to 12 VDC power supply. Dimensions: 4" long x 1-5/8" wide. 1-3/8" diameter installation hole size. Specify product numbers with the MP1 suffix. 2-Pin Contact Sockets For Standard Poles .
Part No: 911339-7
Courtesy Lamp from ATTWOOD Home -> Electrical -> Interior Lighting -> Incandescent Lights
Small light with a transparent polycarbonate lens casts a modest amount of light downward, where it can illuminate passageways, cabin soles or other dark spaces. 8W automotive-type bulb included. Requires two #8 screws (not included) for surface mounting. 12V DC. White. Light Style: Surface mount, incandescent, courtesy . Voltage/Draw: 2A @ 12V DC . Fixture Dimensions: 3-7/16"L x 1-13/16"H x 1-1/16"D . Mounting Hardware Included/Required: 2 holes for #8 screws .
Part No: 6325-3
Fuel Vent Line Surge Protector from ATTWOOD Home -> Engine Systems -> Fuel Tanks
New federal laws are prompting filling station attendants and harbormasters to call the Coast Guard on boat owners who pollute. Yet even conscientious boaters sometimes splash fuel out their vent line. Attwood's vent-line surge protector can help you avoid federal fines of up to $5,000 for small fuel spills. With automatic nozzles it shuts off the fuel flow when your tank is full. With non-automatic nozzles it gurgles when it's time to stop pumping. Fits 5/8'' ventilation hose.
Part No: 1675-6
Two Nautical Mile Starboard Deck Mount 3500 Series LED Light from ATTWOOD Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->3500 Series LED Navigation Lights
Proprietary optical design draws only 2. 4 watts at 12VDC—that’s extremely low power draw for today’s market! These lights are completely sealed and are watertight, designed to resist corrosion in even the most extreme saltwater environments. LED technology keeps lights cool to the touch and is rated for 50,000+ hours of use. 1nm lights are for use on boats up to 39. 4'L; 2nm lights are for use on boats up to 65. Case Material: Electro-polished stainless steel . 3"H . Volts: 12V DC .
Part No: 3550G7
42" Straight Pole All-Round Navigation Light from ATTWOOD Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->5500 Series LED All-Around Navigation Lights
Built to stand the test of time All-around pole lights feature articulating heads that adjust from 15° fore to 15° aft to fit all base angles and typical deck installations. Two-pin locking collar is removable to allow use in almost any base. 8 watts at 12V DC—one of the lowest power draws of any two-mile All-Round light on the market today! Rated for 50,000+ hours of use. 4'. Type: Universal replacement white all-around light . Case Material: Black plastic . Mounting Hardware: Not included .
Part No: 5530-42-7
15° Flush Mount Rod Holder from ATTWOOD Home -> Fishing -> Fishing Accessories -> Rod Holders->Stainless Steel Flush Mount Rod Holders, 0-30°
Polished 2" diameter 316 grade stainless steel for corrosion resistance UV resistant polymer liner UV resistant cover cap/gasket closes tube when not in use 2" Diameter Includes Gap-Gasket.
Part No: 66363-7
Bench Style Seat Mount/Slider from ATTWOOD Home -> Seating & Covers -> Seating -> Seat Hardware
Mounts a fishing seat to a bench and is simple to remove. Just lift the seat off! Seat plate slides side to side on 15" rails. Includes seat swivel.
Part No: 15600-3
One Nautical Mile Starboard Deck Mount 3500 Series LED Light from ATTWOOD Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->3500 Series LED Navigation Lights
Proprietary optical design draws only 2. 4 watts at 12VDC—that’s extremely low power draw for today’s market! These lights are completely sealed and are watertight, designed to resist corrosion in even the most extreme saltwater environments. LED technology keeps lights cool to the touch and is rated for 50,000+ hours of use. 1nm lights are for use on boats up to 39. 4'L; 2nm lights are for use on boats up to 65. Case Material: Electro-polished stainless steel . 3"H . Volts: 12V DC .
Part No: 3530G7
54" Folding Pole All-Round Navigation Light from ATTWOOD Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->5500 Series LED All-Around Navigation Lights
Built to stand the test of time All-around pole lights feature articulating heads that adjust from 15° fore to 15° aft to fit all base angles and typical deck installations. Two-pin locking collar is removable to allow use in almost any base. 8 watts at 12V DC—one of the lowest power draws of any two-mile All-Round light on the market today! Rated for 50,000+ hours of use. 4'. Type: Universal replacement white all-around light . Case Material: Black plastic . Mounting Hardware: Not included .
Part No: 5540-54-7
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Mooring Cleats->Stainless-Steel Pop-Up "Neat Cleats"
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
Part No: 66515-7
Stainless-Steel Louvered Vent from ATTWOOD Home -> Ventilation -> Vents -> Interior Vents
All-welded 304 stainless steel construction with polished finish. Install with #8 screws. Requires Attwood 1487B collector box. Attwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull.
Part No: 1488-5
The Centric Seat from ATTWOOD Home -> Seating & Covers -> Seating -> Helm & Fishing Seats
Heavy-duty, molded frame with contoured surfaces looks great and eliminates pressure points. S-curve backrest fits the spine for comfort; side bolster supports in seat and back lend support in rough seas and on tight corners. Rotates on a 23" diameter from seat post. Removable, snap-on white vinyl upholstered seat and back pads . 17. 9"W x 21. 5"H x 19.
Part No: 98350-2
Aft-Deck Shower System from ATTWOOD Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
Part No: 4131-4
Plastic Glove Box from ATTWOOD Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Glove Boxes
Easily mounted into any existing dashboard space. Incorporates a locking latch, and comes with spare keys. Door dimensions: 13 3/4''L x 5 1/2''W. Inside dimensions: 11 3/4''L x 4''W x 6 5/8''D.
Part No: 2638-1
180 Ski Mirror from ATTWOOD Home -> Watersports -> Tow Ropes & Accessories -> Watersport Accessories
Shatterproof, 7'' x 3 1/4'' lens eliminates blind spots. Compact and lightweight.
Part No: 13055-4
24" Stowaway Plug-In Pole All-Round Light from ATTWOOD Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Stowaway Plug-In Pole All-Round Lights
New lens style for our popular all-round light with standard pole base! Swivel cover on base protects the base socket when light is stowed away. Base extends just 3" below deck. 4"L x 1-5/8"W x 1-3/8" dia. Includes Zamak base and one 8-watt wedge-base lamp. Has three countersunk holes for #10 fasteners.
Part No: 7100A7
Anti-Siphon Tank Vent from ATTWOOD Home -> Engine Systems -> Fuel Tanks
Black plastic vent is designed to prevent ingestion of water into fuel tank using a series of internal baffles and traps. Allows more direct routing of the hose to the tank. Requires 1 1/2'' height clearance for anti-siphon feature. Fits 5/8'' I. D. hose.
Part No: 1670-3
White Venturi Vent from ATTWOOD Home -> Ventilation -> Vents -> Interior Vents->Venturi Vents
The “state of the art” in louvered vent styling, these rugged, ABS plastic vents are easily installed on today’s highly contoured deck designs and have an adequate opening for 3" or 4" ventilation systems. Pre-drilled with four holes for #8 screws. Type: Louvered . Material: ABS plastic . Dimensions: 11/16"H x 2-3/4"W x 17-9/16"L . Cutout Size: Surface mount .
Part No: 1494F1
Water-Buster Battery-Powered Pump from ATTWOOD Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps
Pump out just about anything, anywhere! A versatile pump with many uses, including removing water from dinghies alongside the dock. Three D batteries (not included) pump for 5 hours. 200gph open-flow capacity. Submersible. 42" hose stows neatly around the pump. (4' maximum head) GPH: 200 . Requires three D cells, not included. Material: Plastic. Dimensions: 5 1/4" Dia. x 6 3/8" H . Port Sizes: 5/8" .
Part No: 4140-4
Chrome, Green (Starboard) from ATTWOOD Home -> Electrical -> Exterior & Navigation Lighting->Quasar Bi-Color Deck-Mount Lights
Smoothly contoured, these lights are designed for use on boats to 20m or 65. 6'. A single locking screw connects the cap and base for easy installation and service. Resin lenses are tuned for maximum visibility. Includes 8W festoon bulb. Case Material: Plastic resin Case Dimensions: 3"L x 2-1/4"W x 1-3/8"H Mounting Hardware: Three #10 screws (not included) or mount to optional 3300 series snap-on base Volts: 12V Draw: 0.
Part No: 3153G7
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11