Top Sellers
800gph Tsunami Bilge Pump, 2.5A @ 12V DC Draw, 3/4" Port, 4-3/8"H x 3-1/2"W from ATTWOOD
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.
|
Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.
|
Tsunami T800 Cartridge Head, 12V, 36" Wire from ATTWOOD
Interchageable, twist-and-lock cartridges reduce maintenance time and even enable an angler to switch cartridges between an aerator and bilge pump. The rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents.
|
Tachometer/System Check (4"), Johnson/Evinrude outboard, 7000RPM from FARIA INSTRUMENTS
Over 50 years of experience are behind every one of these Faria instrument gauges. They’re designed with an eye for sophistication and a mind for value. Perimeter lighted white dial with stylish blue and black graphics. Polished stainless steel bezel. Contoured black pointer and domed glass lens. All gauges are 12V DC with negative ground and are all internally illuminated unless otherwise noted. Include backclamp, hardware, and installation instructions. Mfr. ’s lifetime limited warranty.
|
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
|
4-Cup 12V Coffee Maker from WARING
Enjoy fresh coffee ashore or afloat with this 4-cup coffee maker that plugs into any 12V outlet. Features include a durable stainless-steel carafe, dripless pour spout, knuckle guard, 30-minute auto shut off, “On” indicator light, and a convenient “Brew Pause” feature that lets you pour a cup of coffee before brewing has finished. Includes coffee scoop and three filters. 10 1/4"H x 5 1/4"W x 7 5/8"D.
|
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
|
Drop-In Hidden Horn from AFI
Designed for easy installation, this hidden horn mounts from the outside. Compact in size, but capable of 107db loudness. Comes with both black and white snap-on ASA plastic grilles. A weatherproof fabric liner lets sound through, but keeps water out. Prewired for 12V installation. Material: ABS plastic . Loudness dB: 107dB . Design Standards: Meets ABYC specs for boats up to 12 meters . Dimensions: 2"H x 3-3/8"W x 3-1/4"D . Power Requirements: 12 Volts .
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
3/16" AmSteel-Blue Rope, Red from SAMSON ROPE
AmSteel-Blue is a 12-strand braided rope utilizing Parallay design with our proprietary blue Samthane coating with Dyneema® SK-75 fiber. This rope yields the maximum in strength-to-weight ratio and is stronger than wire rope constructions—yet it floats. Superior flex, fatigue and wear resistance. Stronger than AmSteel. Much stronger than steel. Very low stretch. Easily spliced. Superior flex.
|
Deluxe Windshield Washer Kit from AFI
Install your own windshield washer systemFits new or existing AFI Deluxe wiper arm and blade sets, with all the parts to outfit two wiper arms. The kit includes a 3 liter water tank with mounting bracket (8. 5"H x 7"W x 4. 5"D), 12V pump motor and 16' below deck clear tubing, 6' above deck black tubing, clips and sprayer fittings. You supply wiring, an in-line 3A fuse and On-Off momentary switch.
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
|
Black from ATTWOOD, 12V from ATTWOOD, 8 from ATTWOOD, Blue from ATTWOOD
|
|
Home -> Electrical -> Exterior & Navigation Lighting->One-Mile Sidelights
Designed to mount on the foredeck or any flat surface of powerboats to 12m. Lights have 1nm visibility. Polycarbonate lenses. Accept #90 (7. 5W) lamps. Stainless model uses an 8W lamp. Bases are predrilled with two countersunk holes. Die-cast Zamak model has a Perma-Plate chrome finish. Volts: 12V . Draw: 0. 62A .
Part No: 66319R7
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Rubber Drain Plugs
These expanding rubber plugs are great for live-well tanks, buoyancy tanks on day sailors and small thru-hulls. Made from brass and neoprene. Cam-action lever.
Part No: 7533A7
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->5500 Series LED All-Around Navigation Lights
Built to stand the test of time All-around pole lights feature articulating heads that adjust from 15° fore to 15° aft to fit all base angles and typical deck installations. Two-pin locking collar is removable to allow use in almost any base. 8 watts at 12V DC—one of the lowest power draws of any two-mile All-Round light on the market today! Rated for 50,000+ hours of use. 4'. Type: Universal replacement white all-around light . Case Material: Black plastic . Mounting Hardware: Not included .
Part No: 5530-54-7
|
|
|
|
Home -> Seating & Covers -> Seating->Snap-Lock Power Pedestal Systems
Engineered to prevent unintentional detachment, components lock together yet release easily with the push of a button. Combines corrosion-resistant anodized aluminum, fixed or adjustable power pedestals with base plates and E-coated seat mounts that are dipped in black paint and electro-coated. Sturdy 1. 77"dia. system is virtually wobble-free. A - 13" Seat post. B - Adjustable drop in post, 16" - 20". C - Adjustable drop in post, 24" - 30".
Part No: SP-67904
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights
Waterproof 304 stainless steel 12 pt. white light for vertical transoms. 2-mile, 135° light provides visibility for craft up to 164' (50m). Light body is translucent, so it shines on both sides of bulkhead. Can also be used to light an interior compartment or as a courtesy light. Includes 7. 5W bulb. Case Material: 304 Stainless steel with plastic body and watertight lamp socket . Case Dimensions: 3"Dia. . Mounting Hardware: Two #10 stainless steel screws (included) .
Part No: 6356D7
|
|
|
|
Home -> Anchor & Docking -> Anchors->Attwood Mushroom Anchors
The ideal size and weight for skiffs, canoes, inflatables and other small boats in calm waters. Soft Poly-Flex coating is easy to clean and won't scuff up your boat.
Part No: 0156-0135
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->5500 Series LED All-Around Navigation Lights
Built to stand the test of time All-around pole lights feature articulating heads that adjust from 15° fore to 15° aft to fit all base angles and typical deck installations. Two-pin locking collar is removable to allow use in almost any base. 8 watts at 12V DC—one of the lowest power draws of any two-mile All-Round light on the market today! Rated for 50,000+ hours of use. 4'. Type: Universal replacement white all-around light . Case Material: Black plastic . Mounting Hardware: Not included .
Part No: 5530-48-7
|
|
|
|
Home -> Seating & Covers -> Seating->PROform Folding Boat Seat
PROForm Seat Series PROForm seating is rugged and ergonomically matched to the natural S-curve of the human spine. Provides the perfect support for the active boater and fisherman. It's the sure-fire choice because it accommodates the dimensions of 95% of the population. And all of that makes it a comfortable choice for your boat. Drain hole helps it stay dry . Backrest latch eliminates the need for straps and snaps . Upholstered, padded seat and backrest add cushioned comfort .
Part No: 7012-706-4
|
|
|
|
Home -> Seating & Covers -> Seating->Wedge Pedestal Systems
Designed to "wedge" together to prevent unintentional detachment, these components snap easily into the base for a snug, stable fit. Simply press the tab to release. Seat mount may be snapped directly into base for a lower profile while fishing, trailering, or covering your boat. Seat mounts swivel 360º. 2" systems are for use under 5 mph.
Part No: SP-68914
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Quasar Bi-Color Deck-Mount Lights
Smoothly contoured, these lights are designed for use on boats to 20m or 65. 6'. A single locking screw connects the cap and base for easy installation and service. Resin lenses are tuned for maximum visibility. Includes 8W festoon bulb. Case Material: Plastic resin Case Dimensions: 3"L x 2-1/4"W x 1-3/8"H Mounting Hardware: Three #10 screws (not included) or mount to optional 3300 series snap-on base Volts: 12V Draw: 0.
Part No: 3153R7
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights
Waterproof 304 stainless steel 12pt white light for vertical transoms. 2-mile, 135° light provides visibility for craft up to 164' (50m). Includes 7. 5W bulb. Meets Coast Guard requirements for boats built before Nov. 2003. Case Material: 304 Stainless steel, plastic body . Case Dimensions: 4-11/16"L x 2-11/16"H x 2"D . Cutout: 2"H. Mounting Hardware: Two #10 screws (included) . Volts: 12V .
Part No: 66382-7
|
|
|
|
Home -> Ventilation -> Bilge Blowers
Designed using aerospace technology to be the most efficient in-line-type blowers on the market. In independent testing at Western Michigan University, these blowers were proven to be as much as four times more efficient than other in-line models. In addition, they're water-resistant for use in bilge applications. Style: 3" In-Line Turbo Blower Draw: 3.
Part No: 1733-4
|
|
|
|
Seating & Covers->Seating->Seat Hardware->Lock'N Pin 3/4" Pin Pedestal Systems
.
Part No: SP-3204-R
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->3500 Series LED Navigation Lights
Proprietary optical design draws only 2. 4 watts at 12VDC—that’s extremely low power draw for today’s market! These lights are completely sealed and are watertight, designed to resist corrosion in even the most extreme saltwater environments. LED technology keeps lights cool to the touch and is rated for 50,000+ hours of use. 1nm lights are for use on boats up to 39. 4'L; 2nm lights are for use on boats up to 65. Case Material: Electro-polished stainless steel . 3"H . Volts: 12V DC .
Part No: 3530R7
|
|
|
|
|
Home -> Seating & Covers -> Seating->Lock'N Pin 3/4" Pin Pedestal Systems
.
Part No: SP-3004-R
|
|
|
|
|
Home -> Seating & Covers -> Seating->Lock'N Pin 3/4" Pin Pedestal Systems
.
Part No: SP-67739
|
|
|
|
|
Home -> Seating & Covers -> Seating->PROform Folding Boat Seat
PROForm Seat Series PROForm seating is rugged and ergonomically matched to the natural S-curve of the human spine. Provides the perfect support for the active boater and fisherman. It's the sure-fire choice because it accommodates the dimensions of 95% of the population. And all of that makes it a comfortable choice for your boat. Drain hole helps it stay dry . Backrest latch eliminates the need for straps and snaps . Upholstered, padded seat and backrest add cushioned comfort .
Part No: 7012-004-4
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Mooring Cleats->Chrome-Plated Zinc Open-Base Cleats
Chrome-Plated Zinc Open-Base Cleats, sold in pairs.
Part No: 6245-6
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->3500 Series LED Navigation Lights
Proprietary optical design draws only 2. 4 watts at 12VDC—that’s extremely low power draw for today’s market! These lights are completely sealed and are watertight, designed to resist corrosion in even the most extreme saltwater environments. LED technology keeps lights cool to the touch and is rated for 50,000+ hours of use. 1nm lights are for use on boats up to 39. 4'L; 2nm lights are for use on boats up to 65. Case Material: Electro-polished stainless steel . 3"H . Volts: 12V DC .
Part No: 3520-7
|
|
|
|
Home -> Plumbing -> Fittings & Valves
For aerator systems. For use with 3/4"ID hose. Installation hole size: 1-1/16" to 1-1/8". Max. hull thickness: 1-7/16".
Part No: 3886-3
|
|
|
|
|
Home -> Anchor & Docking -> Anchors->Attwood Mushroom Anchors
.
Part No: 0156-0017
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Quasar Bi-Color Deck-Mount Lights
Smoothly contoured, these lights are designed for use on boats to 20m or 65. 6'. A single locking screw connects the cap and base for easy installation and service. Resin lenses are tuned for maximum visibility. Includes 8W festoon bulb. Case Material: Plastic resin Case Dimensions: 3"L x 2-1/4"W x 1-3/8"H Mounting Hardware: Three #10 screws (not included) or mount to optional 3300 series snap-on base Volts: 12V Draw: 0.
Part No: 3120-7
|
|
|
|
Pedestal -Seat Adj 14-20 2-3/8|Pedestal -Seat Adj 14-20 2-3/8.
Part No: 2385400
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->2-Mile Stainless-Steel Sidelights
Horizontal deck mount Smooth contour prevent lines from snagging on housing Stainless steel electrical contacts will not corrode Compact size allows installation on confined decks Tinned-copper wire leads for easy installation and corrosion-resistance.
Part No: 3820R7
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->2-Mile Stainless-Steel Sidelights
Horizontal deck mount Smooth contour prevent lines from snagging on housing Stainless steel electrical contacts will not corrode Compact size allows installation on confined decks Tinned-copper wire leads for easy installation and corrosion-resistance.
Part No: 3820G7
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories -> Watersport Accessories
Constructed of 304 stainless steel for corrosion resistance. All welded seams are smoothed and the surface has a highly polished finish. Stainless steel mounting washers and nuts included.
Part No: 66450-5
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Universal Bi-Color Pole Lights
Based on Attwood’s popular Pulsar Pole Lights, these stowaway bi-color lights feature convenient universal plug-ins with locking collars that allow you to activate or remove the light quickly and easily—great for bass boats and flats boats with bow platforms.
Part No: 5092-10-7
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->L5500 Series LED All-Round Lights
8 watts of 12 power—lowest power draw available! Lights are also rated for 50,000+ hours of use.
Part No: 5557-12-7
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
Part No: 1684-6
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Flush-Mount 316 Stainless Fuel Vents
Corrosion-resistant 316 stainless steel flush vents feature a smooth exterior with no protruding cap to cause damage, or be damaged by hull bumps and scrapes. Caps unscrew with allen wrench for easy cleaning of filter or for pressure testing the entire system. For 5/8" ID fuel hose. Max. hull thickness 7/8".
Part No: 66032-3
|
|
|
