Top Sellers
Capstan 1000 Rope Winch from POWERWINCH
Versatile system uses an easy to operate foot switch to retrieve anchors or fishing pots or provide power assistance on limited crew sailboats. Solid, 1-piece, machined capstan features aluminum housing with stainless steel internal shafts and hardware. Deck mounted design saves space for rope locker. Mounting template included. Pulling Power: 1000lbs. Speed Up: 40'/min. Boat size: to 55' . Rope Type: 3-strand nylon. Draw: 27A @12v. Measure 6 5/16"H x 8"W x 10 9/16"L.
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
|
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
1/8" Single Braid, 2300lb. Breaking Strength, Green from SAMSON ROPE
The high-strength, low-stretch equivalent to wire rope with seven times less weight! Combined with flex-fatigue and service life durability, Amsteel 12-strand Dyneema SK-75 single braid can outlast wire rope and has none of the handling and safety issues associated with wire. Stretch: 0. 70% at 20% of breaking strength. Best Use: Cascade systems, replacements for wire halyards, tapered sheets, backstays, runners, checkstays and strong ultralight rigging . Construction: 12-strand single braid .
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
|
|
|
Replacement Cap with Gauge from MOELLER
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.
|
Flo N’ Go Gas Pump from MOELLER
Stop the slosh! Save gas and prevent spills with a precision pump Still filling the fuel tank by pouring from a heavy can into a funnel? Stop the slosh with Moeller's precision Flo'n'Go Pump. Pump gives you more control for clean filling, less spillage, fumes and pollution. NOT available in CARB states due to state restrictions. * Simple, reliable bellows pump. Made of high-density polyethylene plastic. Pumps gas in any direction. NOT available in CARB states due to state restrictions*.
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" Aluminum Hose Barb, 1/4" Make Thread from MOELLER
Barb-Fuel 1/4Npt x 1/4 M Thrd|Barb-Fuel 1/4Npt x 1/4 M Thrd.
|
|
|
|
from MOELLER, 16" from MOELLER, 4" from MOELLER, 10" from MOELLER
|
|
Home -> Safety -> Man Overboard Gear->MOBi-lert Personal Transmitters
Small, lightweight personal transmitter pendants (PTX) for use with the MOBi-lert System. Any MOBi-lert PTX can be used with any MOBi-lert console. When adding new PTX to an existing console, register the new PTX to the console using included, step-by-step instructions. Constructed of high-impact resistant polycarbonate, their case is ultrasonically sealed and they are waterproof to a rating of IP68. A fully recharged pendant will last up to 48 hours. Free air range of approximately 98'/30m.
Part No: MOA-0040
|
|
|
|
|
Home -> Safety -> Man Overboard Gear->MOBi-lert Personal Transmitters
Small, lightweight personal transmitter pendants (PTX) for use with the MOBi-lert System. Any MOBi-lert PTX can be used with any MOBi-lert console. When adding new PTX to an existing console, register the new PTX to the console using included, step-by-step instructions. Constructed of high-impact resistant polycarbonate, their case is ultrasonically sealed and they are waterproof to a rating of IP68. A fully recharged pendant will last up to 48 hours. Free air range of approximately 98'/30m.
Part No: MOA-0037
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Glass View In-Line Fuel Filter
Traps dirt and other metallic particles in your outboard fuel, and allows for quick inspection of fuel condition. Die-cast ends are rugged, and filters can be easily removed and replaced. Universal hardware includes 1/4'', 5/16'', and 3/8'' O. D.
Part No: 033318-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Converting a gasoline tank to diesel use? You'll need a fitting that allows you to connect a fuel return line. To meet the needs of a return line found on diesel and some fuel injection engines, this design ensures all needs are met. Also includes fuel gauge float and sending unit.
Part No: 035724-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Direct Sight Mechanical Read Capsule.
Part No: 035759-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Reed Switch Sending Units
Direct OEM replacements for gasoline applications, calibrated for 240-33 ohm gauges. Stainless steel construction, with gasket and screws included.
Part No: 035767-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035756-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Belly Series Below Deck Fuel Tanks
Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. S. They’re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O. D.
Part No: 032555
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Topside Fuel Tanks
Ideal for storage in transom wells and other small areas, these tanks hold their rated capacity and include reserve areas as well. Polyethylene construction with UV inhibitors meet all ABYC and USCG standards.
Part No: 031212
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Yamaha 5/16" Barb Female Fuel Line Engine Connector.
Part No: 033471-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Portable Fuel Tanks
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
Part No: 031612
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks->Permanent Below Deck Fuel Tanks
Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. S. They’re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O.
Part No: 032518
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks->Permanent Below Deck Fuel Tanks
Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. S. They’re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O.
Part No: 032719
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Mercury 1/4 NPT Brass Male Tank Connector 1998 And Newer Style Engines; Two Prong Clip Style.
Part No: 033477-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks->Permanent Below Deck Fuel Tanks
Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. S. They’re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O.
Part No: 032818
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Angled Fill & Vent Series Below Deck Fuel Tanks
Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. S. They’re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O.
Part No: 032631
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks
Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. S. They’re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O.
Part No: 032819
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Fuel Lines & Accessorie
High quality brass reducer.
Part No: 033402-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035752-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Connct-Fuel Merc5/16in Ln-to-E|Connct-Fuel Merc5/16in Ln-to-E.
Part No: 033473-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Portable Fuel Tanks
43. 00"L x 15. 00"W x 6.
Part No: 031615
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks->Permanent Below Deck Fuel Tanks
Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. S. They’re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O.
Part No: 032550
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Mercury 1/4 NPT Plastic Female Fuel Line Tank Connector Bayonet Style.
Part No: 033472-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Coast Guard and industry standards require anti-siphon protection on all gasoline powered boats. These valves combine anti-siphon protection with a convenient hose barb design. Made of tough aluminum.
Part No: 033802-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Fuel Lines & Accessorie->Fuel Hose
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
Part No: 034313
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers->Ice Station Zero Fishing Coolers
Made of FDA-approved polyethylene that won’t absorb odor and rated to keep ice for five days at 90°F. , these coolers are ideal for offshore fishing excursions or any outdoor activity where rugged durability and long-term cooling is required. High-impact, seamless, double-walled boxes and lids undergo a 24- hour pressure fitting process to ensure the most conforming seal possible. Moisture-resistant foam in a thick-celled latticework keeps the cold in and the heat out. Material: Polyethylene .
Part No: 043127
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Color Vision Paint
Color matched to your engine’s original color Marine Color Vision is formulated for the marine environment. For use on all outboard & inboard engines, stern drive and lower unit applications. Quick-dry formula!. Oil & Gasoline Resistant. 12 oz.
Part No: 025491
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Inboard, I/O Engine Paint & Outboard Paint
Durable, heat- and solvent-resistant acrylic lacquers formulated for use on all outboard and inboard engines, stern drive and lower unit applications. They are color-matched to original OEM colors and are a great way to protect your engine and make it look like new. 12oz.
Part No: 025519
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks->Permanent Below Deck Fuel Tanks
Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. S. They’re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O.
Part No: 032512
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks->Permanent Below Deck Fuel Tanks
Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. S. They’re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O.
Part No: 032619
|
|
|
