Top Sellers
1/8" Endura 12 Dyneema Single Braid, 2,100lb. Breaking Strength from NEW ENGLAND ROPES
Extremely high strength-to-weight ratio! Excellent strength-to-weight ratio, ultra-low elongation, excellent flexibility and wet/dry strength retention, torque-free, and it floats. Constructed from Dyneema SK-75, Endura 12 has a proprietary urethane coating for improved abrasion resistance. Best Use: Halyards, sheets, low-stretch control lines, guys, slings/hoisting ropes . Construction: 12-strand single braid . Core Fiber/Construction: Coated Dyneema SK-75 . 0% at 30% of breaking strength .
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .
|
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
|
|
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
1/4" Aluminum Hose Barb, 1/4" Make Thread from MOELLER
Barb-Fuel 1/4Npt x 1/4 M Thrd|Barb-Fuel 1/4Npt x 1/4 M Thrd.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
|
|
PAR-Max 4 Water-System Pump, 12V from JABSCO
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
|
Replacement Cap with Gauge from MOELLER
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.
|
Flo N’ Go Gas Pump from MOELLER
Stop the slosh! Save gas and prevent spills with a precision pump Still filling the fuel tank by pouring from a heavy can into a funnel? Stop the slosh with Moeller's precision Flo'n'Go Pump. Pump gives you more control for clean filling, less spillage, fumes and pollution. NOT available in CARB states due to state restrictions. * Simple, reliable bellows pump. Made of high-density polyethylene plastic. Pumps gas in any direction. NOT available in CARB states due to state restrictions*.
|
OEM Replacement Fuel Tanks from MOELLER
The OEM’s (Original Equipment Manufacturer’s) choice in lightweight, non-corroding portable fuel tanks! Includes a universal 1/4" NPT fuel pickup adapter and fulfills all your large and small outboard engine needs. Approved for use in Japan, Australia and New Zealand, Canada, ISO and CSA Certified, UL Listed. 21. 25"L x 14"W x 9.
|
|
|
|
from MOELLER, 12" from MOELLER, 4" from MOELLER, 22" from MOELLER
|
|
Home -> Engine Systems -> Fuel Tanks->Reed Switch Sending Units
Direct OEM replacements for gasoline applications, calibrated for 240-33 ohm gauges. Stainless steel construction, with gasket and screws included.
Part No: 035761-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.
Part No: 033417-10
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Drain Plugs->Transom Drain Tube & Plug, 5 Spare Plugs & 'o' Rings
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
Part No: 020304-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Electric Fuel Gauge Sending Units
These sending units fit the industry-standard bolt-hole pattern and 240-33 Ohm gauges. Internal measurement components will not rust or corrode.
Part No: 035722-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Suzuki 3/8" Barb Chrome Plated Brass Female Fuel Line Engine Connector.
Part No: 033487-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
1/4" Aluminum Anti-Siphon Barb • Delivers Coast Guard/industry standard anti-siphon protection on all gasoline-powered boats • Combines anti-siphon protection with a convenient hose barb design • Made of tough aluminum • Features 1/4 NPT threads.
Part No: 033801-10
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Zinc Chromate
For use on aluminum and galvanized steel surfaces above or below the waterline, this primer chemically etches into aluminum and forms a corrosion-resistant surface. Helps to create an even, bondable surface for top coat adhesion. Select color (Green or Yellow) that contrasts the least with the top coat you plan to apply. 12oz.
Part No: 025421
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Color Vision Paint
Color matched to your engine’s original color Marine Color Vision is formulated for the marine environment. For use on all outboard & inboard engines, stern drive and lower unit applications. Quick-dry formula!. Oil & Gasoline Resistant. 12 oz.
Part No: 025340
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Color Vision Paint
Color matched to your engine’s original color Marine Color Vision is formulated for the marine environment. For use on all outboard & inboard engines, stern drive and lower unit applications. Quick-dry formula!. Oil & Gasoline Resistant. 12 oz.
Part No: 025109
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035753-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Fuel Lines & Accessorie->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035754-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
5 Hole Gasket for Electric and Mechanical Sending Units.
Part No: 035728-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Brass Hose Menders
Each hose mender includes two (2) Stainless Steel Clamps.
Part No: 033212-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
1/4 NPT X 3/8" Aluminum hose barb with male threads.
Part No: 033442-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Mechanical Fuel Sending Units
Direct, non-electric mechanical sending units with direct sight gauge on top of unit. Includes gasket and five screws. Conversion is simple by removing two screws and replacing capsule. Calibrated to be compatible with 240-33 ohms, so can be converted to remote electric gauge using Conversion Capsule, Model 8979122.
Part No: 035758-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks->Permanent Below Deck Fuel Tanks
Moeller permanent tanks are favored by quality boat builders. Cross-linked rotationally molded polyethylene fuel tanks are UV stabilized and impervious to corrosion and ethanol-enhanced fuel. S. They’re equipped with an electrical fuel sending unit for use with a dash-mounted gauge. Measurements do not include fittings. Add 2 1/2" to height for fill neck. Allow for hydrocarbon swelling that adds about 3% to measurements in all directions. Quality features: Fittings with highest O.
Part No: 32640
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Portable Fuel Tanks
We're revolutionizing the marine industry standards for topside fuel tanks, providing engineering that looks and performs better than any other fuel tanks available. Includes mechanical direct-sight gauge with easy-to-read indicator. Specifically designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. - VPN - 008189 008190 008191 - WM SKU - 10798924 10798932 10798940 - Gal/Litre - 9 / 34 12 / 45 12 / 45 - Dimensions - 22.
Part No: 008191
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Stainless steel wire components. Custom calibration to fit reservoir configurations. Common thread size. For use on plastic tanks.
Part No: 395009
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
We're revolutionizing the marine industry standards for topside fuel tanks, providing engineering that looks and performs better than any other fuel tanks available. Includes mechanical direct-sight gauge with easy-to-read indicator. Specifically designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. - VPN - 008189 008190 008191 - WM SKU - 10798924 10798932 10798940 - Gal/Litre - 9 / 34 12 / 45 12 / 45 - Dimensions - 22.
Part No: 008190
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
We're revolutionizing the marine industry standards for topside fuel tanks, providing engineering that looks and performs better than any other fuel tanks available. Includes mechanical direct-sight gauge with easy-to-read indicator. Specifically designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs. - VPN - 008189 008190 008191 - WM SKU - 10798924 10798932 10798940 - Gal/Litre - 9 / 34 12 / 45 12 / 45 - Dimensions - 22.
Part No: 008189
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Fuel Containers
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Part No: 005092
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Fuel Containers
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Part No: 005898
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Fuel Containers
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Part No: 007378
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Fuel Containers
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Part No: 005086
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Fuel Containers
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Part No: 007450
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Fuel Containers
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Part No: 005096
|
|
|
|
ECO Fuel Can Spill-Proof Spout.
Part No: 99W 05459
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 034394-10LP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
A 3/8" fuel line assembly designed for use with portable fuel systems. Each assembly comes complete with a large alcohol resistant primer bulb with 3/8" fittings, 3/8" co-extruded braided fuel line hose which is alcohol resistant, and 3/8" barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts.
Part No: 033389-10LP
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Fuel Containers
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Part No: 005090
|
|
|
