Top Sellers
Deck Fill, Waste, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
|
|
Fiberglass Boat Cleaner 920 1/2 Gallon from COLLINITE
Removes rust, exhaust, oil, grease, and oxidation stains from fiberglass. Restores the original color quickly without hard rubbing or buffing, leaves a chemically clean surface to which waxes can bond. Use with fiberglass boat wax or heavy-duty paste Fleetwax . Made in U. S. A.
|
VC-Underwater Epoxy Bottom Finish - 2 Gallons from INTERLUX
Teflon® adds lubricity and eases wet sanding and burnishing. VC Performance Epoxy's hard, stain-resistant finish is also ideal for rack-stored and trailered boats or boats that are kept in the water not requiring antifouling protection. VC Performance Epoxy has no antifouling or foul release properties. Recommended Usage: Dry-stored or trailerable boats; gel coat, epoxy, or metal hulls; racing boats . Additives: Teflon® . Number of Coats Recommended: Three/four, as needed . Coverage: 50sq.
|
|
1-1/2" Single, 1,500lb. SWL, 2.8oz. from HARKEN
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
|
360W 2/1 Channel Power Amplifier from CLARION MARINE AUDIO
The APX290M provides 360 Watts of Maximum Music Power. 90W x 2 into 4 Ohms, 20Hz - 50kHz @ <. 1%THD. 180W x 2 into 2 Ohms, 20Hz - 50kHz @ <. 1% THD. Variable Bass Extender, 0 - 15dB @ 45Hz. Adjustable -12db/Oct. High/Low Pass Crossover, 55 - 550Hz, 550 - 5. 5kHz . Mixed Mode Operation . Conformal Coated Double Sided PCB.
|
Pontoon and Aluminum Cleaner from M And L MARINE, INC.
Just spray it on and rinse it off! 1/2-gallon bottle of concentrate with attached sprayer.
|
1.05qt. (1 litre) Accumulator Tank, 13.25"L x 4.75"W x 4.38"H from JABSCO
Made of non-corrosive plastic, these tanks have an internal pressurized bladder which reduces pulsation and rapid on/off pump cycling. Bladders are pre-pressurized and their pressure can be adjusted with a standard bicycle pump. Tanks mount in any position. Include convenient Snap-Fit fittings. Material: Plastic with rubber bladder . Port Sizes: Includes four Snap-Fit port fittings: Two for 1/2" hose; Two for 1/2" Qest thread. Maximum Pressure: 125psi .
|
PV7D Controller, 1-1/2"W x 2-7/8"H x 1"D from FLEXCHARGE
Ultra -High Efficiency Solar & Wind Charge Controllers Waterproof and better than 99. 5% efficient with charging currents of 0. 5 to 25 amps, a 2-15% gain over competitors. Handles spikes up to 1,500V/A, so your controller won’t be damaged by surges. 7 amp PV7D is a cost effective shunting regulator for smaller 6V, 12V or 24V solar only applications, expandable to handle charging currents from 30 to 500A. Reverse polarity protected and fully sealed for use in high humidity environments.
|
|
2" Single, 2,000lb. SWL, 5.3oz. from HARKEN
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
|
Euro Pricess 2-Burner Drop-In Gas Stove Top from SEAWARD PRODUCTS
Tested to the highest standards and built to withstand all harsh physical conditions, this gas cook top is made to last in the marine environment. This new model offers a high-impact, tempered, black glass top, thermal-protected burners and electronic ignition. All 7 1/2" burners are 7,000btu and 9 1/2" burners are 10,000btu. Certified to ANSI Z21. Configuration: Can be installed left to right or front to back. Burners: One 7 1/2" burner, One 9 1/2" burner.
|
Marine 720W 4/3/2 Channel Power Amplifier from CLARION MARINE AUDIO
APX490M provides 720 Watts of Maximum Music Power 90W x 4 into 4 Ohms, 20Hz - 50kHz @ <. 1%THD . 180W x 4 into 2 Ohms, 20Hz - 50kHz @ <. 1% THD . Variable Bass Extender, 0 - 15dB @ 45Hz . Adjustable -12db/Oct. High/Low Pass Crossover, 55Hz - 550Hz (Rear 55 - 550Hz, 550Hz - 5. 5kHz). Mixed Mode Operation . Conformal Coated Double Sided PCB. Non-Corrosive Aluminum Heat Sink .
|
1100gph 12V Bilge Pump, 3.3A Draw at 12V DC, 1-1/8" Port, 4-1/2"H x 2-3/8"W from RULE INDUSTRIES
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.
|
8D High Double Battery Box from TODD ENTERPRISES
8"D High Double Battery Box (91-2339) Battery box for 2 High D Batteries OD: 28"D, 24-1/2"W, 14-1/2"H; ID: 24-1/2"D, 21"W, 12-1/2"H.
|
|
2 Gallon from MAS EPOXY, 1, 1 Gallon from MAS EPOXY
|
|
Fishing -> Trolling Motors -> Trolling Motors, Stern
This two-blade prop is designed specifically for Navigator trolling motors for maximum performance and durability in weeds, shallows and other tough conditions. Made of heavy-duty plastic.
Part No: 65-8302
|
|
|
Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim->Manual On-the-Water Adjustment Jack Plate
The only jack plate you can adjust from inside the boat with only one screw The only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
Part No: 600M
|
|
|
|
Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim->Manual On-the-Water Adjustment Jack Plate
The only jack plate you can adjust from inside the boat with only one screw The only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
Part No: 800M
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts
This adjustable outboard motor bracket is designed for motors up to 10 hp or 80 lbs. Its heavy-duty, light-weight aluminum is designed for fresh water use on both powerboats and sail boats.
Part No: 55-0022
|
|
|
Engine Systems -> Motor Mounts
This heavy duty Transom Adaptor Plate is excellent for the boater who wants the ability to quickly remove their bracket from the transom.
Part No: 55-0023
|
|
|
Engine Systems -> Motor Mounts -> Motor Mounts
This adjustable outboard motor bracket is also designed for motors up to 20hp or 115 lbs. Its heavy duty, light weight aluminum is designed for fresh water use on both powerboats and sail boats.
Part No: 55-0021
|
|
|
|
Engine Systems -> Trim Tabs & Hydrofoils -> Power Tilt/Trim->Manual On-the-Water Adjustment Jack Plate
The only jack plate you can adjust from inside the boat with only one screw The only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
Part No: 1000M
|
|
|
Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-5501
|
|
|
|
Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-1165
|
|
|
|
Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-0165
|
|
|
|
Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-5200
|
|
|
|
Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-5500
|
|
|
|
Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-0110
|
|
|
|
Fishing -> Trolling Motors->Navigator Tournament Engine-Mount Trolling Motors
An excellent option for those who want a quiet and easy way of steering while they troll. Features a variable speed “Tournament Series” remote control with pulse width modulation electronics. Each Navigator electric trolling system includes a handheld controller with forward & reverse. This state-of-the-art electronic system greatly extends the trolling time on a single battery charge. Designed for easy installation, they come complete with cabling and stainless steel hardware.
Part No: 65-5201
|
|
|
Engine Systems -> Trim Tabs & Hydrofoils->Hydraulic All-in-One Jacking Plates
Patented design utilizes stainless steel support rods instead of the typical design with aluminum rods rubbing against UHMW or other plastic-type composites. All-in-One jack plates are laboratory tested to exceed 65 tons of sheer. Exclusive bronze oil-lite bushings with zerk grease fittings and dual wipers keep salt, sand, and silt off stainless rods. Two control system/switch options: OBD models include instrument panel mounted rocker switch control. Rated for engines to 300hp (or 625lbs. ).
Part No: OBD800
|
|
|
|
Engine Systems -> Trim Tabs & Hydrofoils->Hydraulic All-in-One Jacking Plates
Patented design utilizes stainless steel support rods instead of the typical design with aluminum rods rubbing against UHMW or other plastic-type composites. All-in-One jack plates are laboratory tested to exceed 65 tons of sheer. Exclusive bronze oil-lite bushings with zerk grease fittings and dual wipers keep salt, sand, and silt off stainless rods. Two control system/switch options: OBD models include instrument panel mounted rocker switch control. Rated for engines to 300hp (or 625lbs. ).
Part No: OEZ800
|
|
|
Paint & Maintenance -> Cleaners, Soaps & Polishes->Spray Away All-Purpose Cleaner
Heavy-duty spray removes black streaksHeavy-duty, all-purpose cleaner and degreaser. Nontoxic, nonflammable formula. Great for black streaks on hulls or vinyl. 32oz. 32oz.
Part No: MK2832
|
|
|
Paint & Maintenance -> Cleaners, Soaps & Polishes -> Specialty Cleaners->On & Off Hull/Bottom Cleaner
Powerful cleaner Removes waterline, rust and scum. Won't harm fiberglass. Brush-on/rinse-off, biodegradable formula.
Part No: MK20128
|
|
|
|
Paint & Maintenance -> Cleaners, Soaps & Polishes -> Specialty Cleaners->On & Off Hull/Bottom Cleaner
Powerful cleaner Removes waterline, rust and scum. Won't harm fiberglass. Brush-on/rinse-off, biodegradable formula.
Part No: MK2032
|
|
|
Paint & Maintenance -> Epoxy & Fiberglass->MAS Medium Hardener
MAS Medium Hardener is a polyamine blend intended for moderate reactivity. We recommend this hardener when "overnight" sandibility is more important than continuous laminating and open time (as provided by MAS Slow Hardener) MAS Medium will also provide a beautifully smooth void free finish, with great resistance to milking out during application and fogging in critical clear coating applications. STORAGE LIFE: A minimum of 12 months in a sealed container at ambient temperatures.
Part No: 30-567
|
|
|
Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Cell-O-Fill Filler
Derived from all natural alpha cellulose, the fibrous ribbons create a matrix with the epoxy and help reduce sagging and slumping. Used in place of Colloidal Silica, it will not billow in the air like silica and you will need half as much to create the same thickness.
Part No: 25-003
|
|
|
|
Paint & Maintenance -> Epoxy & Fiberglass->MAS Medium Hardener
MAS Medium Hardener is a polyamine blend intended for moderate reactivity. We recommend this hardener when "overnight" sandibility is more important than continuous laminating and open time (as provided by MAS Slow Hardener) MAS Medium will also provide a beautifully smooth void free finish, with great resistance to milking out during application and fogging in critical clear coating applications. STORAGE LIFE: A minimum of 12 months in a sealed container at ambient temperatures.
Part No: 30-510
|
|
|
Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->MAS Slow Hardener
When used in conjunction with MAS Epoxy Resin it provides high reactivity and an extended gel time which allows for controlled and extended application periods. Special features exhibited by this product include blush free surfaces, good ultraviolet stability, smooth finishes in cured films, excellent osmotic resistance, and the ability to cure under high humidity. The low viscosity of MAS Slow Hardener (200-250 poise) when mixed with MAS resin is ideal for fast wet-out of reinforcing fabrics.
Part No: 30-008
|
|
|
Paint & Maintenance -> Epoxy & Fiberglass -> Epoxy Resin->MAS Fast Hardener
The low viscosity of Fast Hardener allows for quick wet-out of the heavy reinforcing fabrics often used in repair applications. Additionally, the superior bonding strength of Fast formulas is ideal for high strength secondary bonding applications such as structural tabbing and repair of laminations. The rapid cure time of Fast allows overnight curing in low temperature conditions. of formula unless rapid application techniques are incorporated. Always maintain a 2:1 ratio of resin : hardener.
Part No: 30-625
|
|
|
Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Colloidal Silica
Fumed Colloidal Silica (also known as CAB-0-SIL) Use when an extremely hard solid with high density is needed, i. e. structural bonding, filling and filleting. Add strength to a top coat by using a small amount of Colloidal Silica ( about a tablespoon per 4 ounces). This will add strength and finish absolutely clear.
Part No: 25-002
|
|
|
Paint & Maintenance -> Epoxy & Fiberglass->Biaxial Fiberglass Cloth
For use with polyester or epoxy resins as a reinforcement when laying up or repairing a damaged area.
Part No: 65-817PS
|
|
|
Milled Fibers (1/32" milled fiberglass) For use when epoxy must fill a void and provide extremely high strength and resistance to cracking (i. e.
Part No: 25-006
|
|
|
Paint & Maintenance -> Epoxy & Fiberglass->Low Viscosity Resin
Low-Vis Resin offers some near-perfect features: EASY wet-out of your material, NO VOC's for a better environment, and NO BLUSH when you're done. Can be used in a huge variety of applications including boat hulls and structures which need to completely exclude moisture, as well as laminating and bonding of nearly all materials. Boasts a 600 cps viscosity . Reduced viscosity provides for complete wet out of fiber reinforced fabrics . Formulated from 100% low molecular weight reactive solids .
Part No: 30-002
|
|
|
|
Milled Fibers (1/32" milled fiberglass) For use when epoxy must fill a void and provide extremely high strength and resistance to cracking (i. e.
Part No: 25-005
|
|
|
Paint & Maintenance -> Epoxy & Fiberglass->Wood Flour Filler
Wood Flour For use when a hard solid for filling and filleting is required.
Part No: 25-021
|
|
