Welcome! Please Sign-In
Top Sellers
Telescopic Tiller Extension 29" - 48" from RONSTAN
Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.
Calibrated Resin Pump Set from MAS EPOXY
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
Aft-Deck Shower System from ATTWOOD
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
Twisted Pair Wire with Shield from ANCOR MARINE
Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .
Barbed Hose Reducer, 1" to 1-1/8" from MARINE EAST
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
V. 1-7/8"L x 5/8"W Eye Strap, 1/2" Fairlead Width, 1-3/8" Hole Centers, Two #10 RHMS Fasteners from RONSTAN
V. 1-7/8"L x 5/8"W Eye Strap, 1/2" Fairlead Width, 1-3/8" Hole Centers, Two #10 RHMS Fasteners from RONSTAN
Eye straps are convenient for lashing points and attaching control line leads or blocks.
5/8" Clevis Pin dia., 1-3/16" inside dia., 4-pack from WEST MARINE
SeaStar Helm Seal Kit from TELEFLEX
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
LP Enamel - Hatteras White, Quart from STERLING
LP Enamel - Hatteras White, Quart from STERLING
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Mount on doors, bulkheads, in the cockpit and on hatch boards. Helps to eliminate mildew. . Pre-drilled for six #8 screws. . Mfr. 's lifetime limited warranty. . Ship 0. 5 lbs.
P-Trap Fuel Surge Protector from ATTWOOD
P-Trap Fuel Surge Protector from ATTWOOD
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
Guzzler 500 Surface Mount Bilge Pump from GUZZLER/BOSWORTH
Guzzler 500 Surface Mount Bilge Pump from GUZZLER/BOSWORTH
Guzzler 400 and 500 Bilge Pumps Capable of a 12' suction lift and a 12' delivery head. Surface-mount pumps include a fixed, horizontal handle. Thru-deck models include removable, vertical handle and thru-deck mounting plate with cover.
Flex Trim - Black 1/2" opening from TACO PRODUCTS
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.

5" from NAVPOD, 1, 1-1, 7810BL from NAVTEC, 8IN from NAVTEC

9.5in PreCut Furuno MFD12 from NAVPOD Home -> Electronics -> Boat Instruments->PreCut Furuno MFD12
The Grand Prix series has double seal for watertight intergrity, tamperproof fasteners and polished stainless steel.
Part No: GP1033
Rail Mount NavPod Pre-Cut for Raymarine ST60 or ST70 Surface mounted. (1" SS pedestal guards only) from NAVPOD Home -> Electronics -> Boat Instruments->Navpod Pre-Cut for Raymarine ST60 or ST70
Pre-Cut for Raymarine ST60 or ST70 Surface mounted. Versitile 20/40 Swivel Base, Choice of 20 or 40 Degree tilt angle. Allows left to right swivel action.
Part No: RM4301
Rail Mount NavPod Pre-Cut for Raymarine ST70 Flush mounted only. (1" SS pedestal guards only) from NAVPOD Home -> Electronics -> Boat Instruments->Navpod Pre-Cut for Raymarine ST60 or ST70
Pre-Cut for Raymarine ST60 or ST70 Surface mounted. Versitile 20/40 Swivel Base, Choice of 20 or 40 Degree tilt angle. Allows left to right swivel action.
Part No: RM4302
Power Pre-Cut for a Raymarine ST60 or ST70, Surface Mounted from NAVPOD Home -> Electronics -> Boat Instruments->Navpod Pre-Cut for Raymarine ST60 or ST70
Pre-Cut for Raymarine ST60 or ST70 Surface mounted. Versitile 20/40 Swivel Base, Choice of 20 or 40 Degree tilt angle. Allows left to right swivel action.
Part No: PP4301
Pre-Cut for Furuno MFD12 from NAVPOD Home -> Electronics -> Boat Instruments->PreCut Furuno MFD12
The Grand Prix series has double seal for watertight intergrity, tamperproof fasteners and polished stainless steel.
Part No: PP5033
Pre-Cut for Furuno 12" MFD12 from NAVPOD Home -> Electronics -> Boat Instruments->PreCut Furuno MFD12
The Grand Prix series has double seal for watertight intergrity, tamperproof fasteners and polished stainless steel.
Part No: GP2033
Un-Cut Flush Front, 9.5" from NAVPOD Home -> Electronics -> Boat Instruments->Un-Cut Flush Front Grand Prix Series
9. 5" Un-Cut Flush Front. Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners.
Part No: GP1030
Power Grand Prix UnCut from NAVPOD Home -> Electronics -> Boat Instruments->Un-Cut Flush Front Grand Prix Series
9. 5" Un-Cut Flush Front. Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners.
Part No: PP5030
9.5" Precut For Raymarine C120W Offset To Right Side from NAVPOD Home -> Electronics -> Boat Instruments->Navpod Instrument Housing Precut for Raymarine C120W
For overhead or dash mounting of System NavPods.
Part No: GP1173
12" Precut For Raymarine C120W from NAVPOD Home -> Electronics -> Boat Instruments->Navpod Instrument Housing Precut for Raymarine C120W
For overhead or dash mounting of System NavPods.
Part No: GP2031
12" Precut For Raymarine C120W Offset To Right from NAVPOD Home -> Electronics -> Boat Instruments->Navpod Instrument Housing Precut for Raymarine C120W
For overhead or dash mounting of System NavPods.
Part No: GP2173
9.5" Pre-Cut For Raymarine C90W from NAVPOD Home -> Electronics -> Boat Instruments->Navpod Instrument Housing Precut for Raymarine C90W
For overhead or dash mounting of System NavPods.
Part No: GP1052
12" Pre-Cut For Raymarine C90W from NAVPOD Home -> Electronics -> Boat Instruments->Navpod Instrument Housing Precut for Raymarine C90W
For overhead or dash mounting of System NavPods.
Part No: GP2052
Dyform Wire - 6MM 1X19, 7810BL from NAVTEC Home -> Cordage -> Rigging Products->Dyform Wire Rigging
Control your rig and sail plan more accurately with a low-stretch, high-performance wire strand. Dyform is an essential performance requirement on many racing sailboats and on cruising yachts seeking higher performance and greater margins of safety. It has 30% greater breaking strength and 25% less stretch than conventional wire strand. Wire strands are specially shaped to fill more cross sectional area for greater resistance to elastic stretch. Same corrosion resistance of 316S31 stainless.
Part No: SD19-M06
Stud Terminal, 1/4" Wire Diam., 3/8" Thread Size, 3-9/16" Length from NAVTEC Home -> Cordage -> Rigging Products->Stud Terminals
Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Stud end to wire end. Terminals are reusable, but they must have a new cone.
Part No: N030-0812
1/4" Wire, 1/2" Pin from NAVTEC Home -> Cordage -> Rigging Products->Eye Terminals
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
Part No: N010-0816
9/23" Wire, 1/2" Pin from NAVTEC Home -> Cordage -> Rigging Products->Eye Terminals
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
Part No: N010-M0716
Backstay Adjuster, 1/2" Piston Size, 5400 Max. Force at Std. Relief Valve Setting, 9/32" Max. 1x19 Wire Size, 1/2" Pin dia, 44.3" Length Open, 30.8" Length Closed, 13.5" Stroke from NAVTEC Home -> Cordage -> Rigging Products->Integral Hydraulic Backstay Adjusters
Self-contained hydraulic adjusters feature a longer pump handle that produces a faster pumping motion and more tension per stroke to accommodate modern masts. A built-in gauge is located where it’s easy to read tension values in psi. Includes a single-action pump and leak-free extruded aluminum housing. Overload relief valve saves the rig from overzealous crew. Easy to install, since a remote pump and hose are not required.
Part No: A370-LE-010
Swage, 3/16IN Stemball Fitting from NAVTEC Home -> Cordage -> Rigging Products->Stemball Fittings
Electro-polished 316 stainless steel.
Part No: N641-06
Cone, 3/8" Wire Diameter from NAVTEC Home -> Sailboat -> Rigging Products->Cones for 1x19 Wire
Cones for 1x19 wire (cones for 7-Strand and Dyform available only through Special Order).
Part No: NCC-12
Stud Terminal, 5/16" Wire Diam., 5/8" Thread Size, 4" Length from NAVTEC Home -> Cordage -> Rigging Products->Stud Terminals
Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Stud end to wire end. Terminals are reusable, but they must have a new cone.
Part No: N030-M0820
Stud Terminal, 1/4" Wire Diam., 1/2" Thread Size, 7-1/2" Length from NAVTEC Home -> Sailboat -> Rigging Products->Extra Long Stud Terminals
Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Stud end to wire end. Terminals are reusable, but they must have a new cone.
Part No: N030L-0816
Fork Terminal, 7/32" Wire Dia., 3/8" Eye ID Pin Size, 1-1/8" Length from NAVTEC Home -> Sailboat -> Rigging Products->Norseman Swageless Fork Terminals
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
Part No: N020-0712
Cone, 1/4" Wire Diameter from NAVTEC Home -> Cordage -> Rigging Products->Cones for 1x19 Wire
Cones for 1x19 wire (cones for 7-Strand and Dyform available only through Special Order).
Part No: NCC-08
Cone, 5/16" Wire Diameter from NAVTEC Home -> Cordage -> Rigging Products->Cones for 1x19 Wire
Cones for 1x19 wire (cones for 7-Strand and Dyform available only through Special Order).
Part No: NCC-M08
Norseman Eye, 5/16X5/8IN from NAVTEC Home -> Cordage -> Rigging Products->Eye Terminals
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
Part No: N010-M0820
Eye, 7/32IN Wire 1/2IN Pin from NAVTEC Home -> Cordage -> Rigging Products->Eye Terminals
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
Part No: N010-M0716
Stud Terminal, 9/32" Wire Diam., 1/2" Thread Size, 5-7/8" Length from NAVTEC Home -> Sailboat -> Rigging Products->Extra Long Stud Terminals
Norseman Swageless Stud Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Stud end to wire end. Terminals are reusable, but they must have a new cone.
Part No: N030L-M0716
Stainless-Steel Cupple, 7/32" Wire Diameter from NAVTEC Home -> Cordage -> Rigging Products->Cupples
.
Part No: N640-M06
3/8" Wire, 5/8" Pin from NAVTEC Home -> Cordage -> Rigging Products->Eye Terminals
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
Part No: N010-1220
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11