Top Sellers
Vertical Plunger Galley Pump, White from FYNSPRAY
Affordable, quality plastic pump with European styling. Vertical plunger action, with a 4" spout. Material: Chrome. Capacity: 58 strokes/gal. Dimensions: 4"H. Cutout Size: 1 1/4". Clearance 9".
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
1/4" Aluminum Hose Barb, 1/4" Make Thread from MOELLER
Barb-Fuel 1/4Npt x 1/4 M Thrd|Barb-Fuel 1/4Npt x 1/4 M Thrd.
|
Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Flush-Mount Water Regulator/Inlet from SHURFLO
This combination water regulator, entry screen and check valve with Shurflo’s exclusive diaphragm design provides continuous protection from pressure surges. Pressure will not exceed 50psi. For installation on bulkheads of any thickness. Made of chromed plastic. 4-3/4" x 4-3/4" x 3-3/4".
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
|
4"L from NICRO VENTILATION, 4" Cutout Size from NICRO VENTILATION
|
|
Home -> Ventilation -> Vents
Fits all Nicro standard and low profile cowl-type vents (not needed on Solar vents).
Part No: N10954
|
|
|
|
Home -> Ventilation -> Vents -> Exterior Vents->Flexible PVC Cowl
.
Part No: N10964
|
|
|
|
Home -> Ventilation -> Vents
For a ''clean'' termination attachment of hose to bulkhead, white plastic.
Part No: N10869
|
|
|
|
Home -> Ventilation -> Vents->PVC Clamshell Vents
Typically used to cover bilge blower hose opening. Made of soft, durable and resilient PVC.
Part No: N10874
|
|
|
|
Home -> Ventilation -> Vents
Smaller than a dorade box but just as effective at keeping water from coming below through your cowl vents. A spring loaded ''umbrella'' automatically shuts when water pours into the cowl. Once the water passes through the weep holes in the bottom of the trap, the vent reopens to allow circulation of air. Fits 3" snap-in deck ring and our 3" Flexible PVC Cowls.
Part No: N27200
|
|
|
|
Home -> Ventilation -> Vents
Fits all Nicro standard and low profile cowl-type vents (not needed on Solar vents). Made of nylon mesh in PVC frame.
Part No: N10953
|
|
|
|
|
Home -> Ventilation -> Vents -> Exterior Vents->Flexible PVC Cowl
.
Part No: N10863
|
|
|
|
Home -> Ventilation -> Vents
For use on the Solar Mini-Vent 1000, or the Air Vent 500.
Part No: N28830
|
|
|
|
Connecting link between Nicro snap-in ventilators and vinylvent ventilator tubing. Allows more precise ventilation of engine or fuel tank compartments.
Part No: 99W N10864HA
|
|
|
|
|
Home -> Ventilation -> Vents -> Exterior Vents->PVC Clamshell Vents
Typically used to cover bilge blower hose opening. Made of soft, durable and resilient PVC.
Part No: 99M N10873
|
|
|
|
Home -> Ventilation -> Vents -> Exterior Vents
It has a 100% waterproof shut-off damper operated from below. Vent attaches directly to the deck without a Nicro deckplate. Solar powered exhaust ventilation during daylight - passive exhaust at night . No batteries or wiring required . Whisper-quiet fan operation . Durable white ABS construction . Shut-off damper to prevent water intrusion in rough seas . 2-year limited warranty and 5-year qualified warranty . Mounting hardware included. Optional Stainless steel cover available .
Part No: N20020
|
|
|
|
Home -> Ventilation -> Vents -> Exterior Vents
Nicro engineers have created a passive wind-powered vent that moves 600– 1000cu. ft. /hr. of air with just a 15-knot breeze! A locking shut-off damper may be operated from below. Passive wind-powered Durable white plastic housing Screws directly to the deck Uses standard 3" hole Allows the use of Nicro trim rings Measures only 2"H x 7" Diameter.
Part No: N28810
|
|
|
|
Home -> Ventilation -> Vents -> Exterior Vents
Works with Nicro Solar Vents.
Part No: N20590
|
|
|
|
Home -> Ventilation -> Vents -> Exterior Vents
Slips over the deck plate as it protrudes through a Lexan hatch. Not only protects against potential injury, but also adds finish to the hatch installation.
Part No: N10864PR
|
|
|
|
Home -> Ventilation -> Vents->Day/Night Plus Solar Vents
Solar cells power the fans for efficient, active ventilation. Proper ventilation is the key component to preventing the growth of mold, mildew and fungi and the damage they can cause to interior fabrics, electronics and metal components. Most every boat with a cabin will benefit from the installation of one or more Solar Vents. Direct-to-deck mounting affords greater security and protection against theft. Each includes an insect screen, below-decks shut off damper and internal on/off switch.
Part No: N20704S
|
|
|
|
|
Home -> Ventilation -> Vents->Day/Night Plus Solar Vents
Solar cells power the fans for efficient, active ventilation. Proper ventilation is the key component to preventing the growth of mold, mildew and fungi and the damage they can cause to interior fabrics, electronics and metal components. Most every boat with a cabin will benefit from the installation of one or more Solar Vents. Direct-to-deck mounting affords greater security and protection against theft. Each includes an insect screen, below-decks shut off damper and internal on/off switch.
Part No: N20703W
|
|
|
|
|
Home -> Ventilation -> Vents->Day/Night Plus Solar Vents
Solar cells power the fans for efficient, active ventilation. Proper ventilation is the key component to preventing the growth of mold, mildew and fungi and the damage they can cause to interior fabrics, electronics and metal components. Most every boat with a cabin will benefit from the installation of one or more Solar Vents. Direct-to-deck mounting affords greater security and protection against theft. Each includes an insect screen, below-decks shut off damper and internal on/off switch.
Part No: N20703S
|
|
|
|
|
Home -> Ventilation -> Vents->Day/Night Plus Solar Vents
Solar cells power the fans for efficient, active ventilation. Proper ventilation is the key component to preventing the growth of mold, mildew and fungi and the damage they can cause to interior fabrics, electronics and metal components. Most every boat with a cabin will benefit from the installation of one or more Solar Vents. Direct-to-deck mounting affords greater security and protection against theft. Each includes an insect screen, below-decks shut off damper and internal on/off switch.
Part No: N20704W
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Deck Lights->Halogen Deck Floodlight Kits
Complete kit to install a pair of high-intensity floodlights, easy mounting wherever needed. Choice of Black or White housing . Includes a pair of 55W halogen lamps . 12V DC . Stainless-steel mounting hardware . Bracket, wiring harness and lighted switch included . 2-1/2" bolt spacing .
Part No: DL-16CC
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Halogen Deck Floodlight Kits
Complete kit to install a pair of high-intensity floodlights, easy mounting wherever needed. Choice of Black or White housing . Includes a pair of 55W halogen lamps . 12V DC . Stainless-steel mounting hardware . Bracket, wiring harness and lighted switch included . 2-1/2" bolt spacing .
Part No: DL-16WC
|
|
|
|
Home -> Navigation -> Binoculars & Night Vision -> 7x50 Binoculars with Compass->Ocean Pro 7x50 Binoculars
Superb marine optics offer excellent performance for a fast, clear view!Affordable, full sized, high specification binoculars are designed for boaters, fisherman and watersports enthusiasts. The 7 x 50 OceanPro Binoculars are nitrogen filled and O-ring sealed for waterproof, shockproof and fogproof performance. Since they use a central focusing system, you are assured a clear view in the least amount of time. A rubber armored exterior provides a non-slip grip. Convenient center-focus and 22.
Part No: 7440
|
|
|
|
|
Home -> Navigation -> Binoculars & Night Vision -> 7x50 Binoculars with Compass->Ocean Pro 7x50 Binoculars
Superb marine optics offer excellent performance for a fast, clear view!Affordable, full sized, high specification binoculars are designed for boaters, fisherman and watersports enthusiasts. The 7 x 50 OceanPro Binoculars are nitrogen filled and O-ring sealed for waterproof, shockproof and fogproof performance. Since they use a central focusing system, you are assured a clear view in the least amount of time. A rubber armored exterior provides a non-slip grip. Convenient center-focus and 22.
Part No: 8208
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Very Large Area Charts->Australia & New Zealand Large Area Charts
Large Area Charts.
Part No: W708
|
|
|
|
|
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 54380
|
|
|
|
|
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 53122
|
|
|
|
|
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 52170
|
|
|
|
|
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 99W 53123
|
|
|
|
|
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 53060
|
|
|
|
|
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 56120
|
|
|
|
|
Defense Mapping Agency charts (now known as National Imagery and Mapping Agency or NIMA charts) are U. S. government charts of waters other than the territories and possessions of the U. S. (see NOAA charts for coverage of U. S. territories).
Part No: 53180
|
|
|
