Top Sellers
304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
Stainless-Steel Full-Flow Ball Valve, 1/4" Size (NPT) from GROCO
Components include 316 stainless-steel body, 304 stainless-steel handle, PTFE seals and seats.
|
Stainless-Steel Compact Electric Horn - Double from AFI
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
|
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
|
1, SAE Size 2 from NORMA, 8" to 1-1, 304 Stainless-Steel Hose Clamp, 8"
|
|
Home -> Electronics -> Boat Instruments->HawkEye® In-Dash Digital Depth Sounder (D10DX)
HawkEye® In-Dash Digital Depth Sounder (D10DX) The D10DX includes all the advanced sonar, depth alarm, and keel offset capabilities of the D10D, yet incorporates dual temperature displays. A simple press of a button gives instant access to water or air temperature readings via integrated sensors in both the transducer and head unit. Includes interchangeable black and white bezels and face plates, and also a sun cover to protect the LCD during storage. D10DX. 01. T - Transom Mount Transducer .
Part No: D10DX-01T
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Cookware
Who says you can't make something as yummy as Belgian waffles aboard? This stovetop waffler makes delicate, crisp waffles with extra deep pockets to capture your favorite toppings. And it does it better and faster than an electric waffle iron (not to mention that it's much easier to clean!). Heavy cast aluminum waffler . Non-stick coating . Cool bakelite handles. Long-lasting. Measures: 16 1/2'' x 8 1/2" x 1 1/2".
Part No: 15040
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Galley Accessories
Cooks 4 crispy potatoes in only 30 minutes. Bakes potato from inside out for moist, flavorful taste. Special grill safe non-stick surface for easy clean up.
Part No: 40065
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Cookware
Use the ribbed side of this cast aluminum two-burner grill/griddle for searing meats and for tasty low-fat cooking. Flip it over and use the smooth side for general purpose griddle cooking. Heavy cast aluminum . Will never rust or warp. Provides superior, even cooking. Both sides have a non-stick coating.
Part No: 19462
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Utility Pans
Use these versatile pans on the stove or in the oven for casseroles, soups, stews or pasta. Space-saving, nesting pans are constructed of heavy tri-metal carbon steel for uniform cooking and excellent heat retention. Nordic Ware non-stick interiors mean easy cleanup. Rugged chrome, steel-riveted side handles will never loosen. Durable porcelain exteriors . Dishwasher-safe.
Part No: 22081
|
|
|
|
Hinged cover with handle makes handling easy, helps speed cooking time and protects microwave from spatters.
Part No: 64702
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Cookware
Turn your BBQ into a griller or a steamer/poacher for your fresh catch with this clever reversible pan. Place the holes down for moist, smoke-flavored fish; use it with the holes up for steamed and poached fish. Special grill-safe non-stick surface is easy to clean. Large enough for whole fish, fillets or fish steaks. Includes recipes.
Part No: 71265
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Cookware
Contains two TV dinner plates, one oval casserole, one round casserole and two ramekins. Includes matching covers for each. May also be used in conventional ovens.
Part No: 60001
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware
Two-piece set with raised broiler top and drip pan/roasting/baking pan bottom. Made from heavy-duty, rust-proof aluminized steel construction. Non-stick coated broiler top makes clean up easy. Dishwasher safe. 13"L.
Part No: 41831
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware
Fast and easy tool for making omelettes.
Part No: 63600
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Cookware
This heavy carbon steel griddle with nonstick coating provides uniform heating and cooking and is grill-safe. 2qt. capacity. 11"L x 11"W x 1 1/4"D.
Part No: 10565
|
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Utility Pans
Use these versatile pans on the stove or in the oven for casseroles, soups, stews or pasta. Space-saving, nesting pans are constructed of heavy tri-metal carbon steel for uniform cooking and excellent heat retention. Nordic Ware non-stick interiors mean easy cleanup. Rugged chrome, steel-riveted side handles will never loosen. Durable porcelain exteriors . Dishwasher-safe.
Part No: 11865
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware
Broil and serve sizzling steaks or fajitas restaurant-style with this metal platter. Broiler-safe for direct cooking and serving. Preheat the platter to serve sizzling hot entrees. Dishwasher safe.
Part No: 24065
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704160
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704013
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704026
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704140
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704037
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704050
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704170
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704032
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704300
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704017
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704041
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704080
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704021
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704120
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704060
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704240
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704070
|
|
|
