Top Sellers
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Fiberglass Cleaner and Wax - Quart from SEAPOWER MARINE PROD
Cleans and waxes in one easy stepCleans, waxes, seals and protects the fiberglass surface. Contains the finest Carnauba waxes and silicones and removes surface oxidation, residue, dock marks, grease and dirt while leaving behind a durable high-gloss finish. Excellent for hand or machine use. Quart.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
Hullgard Primer Converter, Qt. from AWLGRIP
Hullgard Epoxy Primer is a holding primer that combines excellent anticorrosion and water barrier properties with anti-fouling tie-coat functionality. Suitable for below the waterline only, it offers a long overcoating interval without sanding to reduce work time along with superb adhesion to properly prepared fiberglass, steel, aluminum and wood. Can be recoated as soon as the solvents evaporate, even at low temperatures. 1 Gal. Theoretical Coverage – 140 Sq. 5 mils/135 microns DFT or 360 Sq.
|
Orpine Boat Soap, Quart from ORPIN
Fresh pine scent!Replaces musty mildew odors with a pleasant fresh pine scent. Just one ounce in three gallons of fresh or saltwater will clean a 45'L boat. Biodegradable. Biodegradable.
|
Teak Care - Brightener, Quart from STARBRITE
Clean, brighten and protect your teak in three easy stepsBeautiful teak in three easy steps! Kit contains three pint-sized bottles, one each of Cleaner to remove stains and weathering; Brightener to highlight the natural grain and enhance color; and Oil to seal and protect wood from weather and UV damage. Individual, quart-sized bottles are also available. Cleaner chemically roots out stains, including ugly black mildew stains. Brightener restores teak's lustrous hue.
|
Cetol Marine Light - Quart from INTERLUX
Enhances and protects the natural beauty of interior and exterior woodSemi-transparent finish prevents weathering and repels water. just wash wood thoroughly and apply. Three coats are recommended for the first application, followed by annual touchups. Marine Light is more translucent than Marine. If a gloss finish is desired, either may be overcoated with Marine Gloss. Quart. Long-lasting adhesion and protection from UV rays and weathering. Flexible, breathable, translucent finish; Quarts.
|
Fiberglass Boat Cleaner 920 1/2 Gallon from COLLINITE
Removes rust, exhaust, oil, grease, and oxidation stains from fiberglass. Restores the original color quickly without hard rubbing or buffing, leaves a chemically clean surface to which waxes can bond. Use with fiberglass boat wax or heavy-duty paste Fleetwax . Made in U. S. A.
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
|
|
|
|
Marine Structural Filler - Quart from WEST MARINE
Great for fiberglass and sheet metal ding repairsFiberglass filler with long strand reinforcing fibers for fiberglass and sheet metal repairs. Water-resistant. Hardener included. Great for quick and easy ding repair on fibergalss surfboards, sailboards, canoes and runabouts. Formulation: Polyester putty . Recommended Usage: Fiberglass and sheet metal repairs . Color: White.
|
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
Methyl Ethyl Ketone Solvent - Quart from KLEAN STRIP
A strong cleanup solvent—very effective for epoxiesMEK has characteristics similar to acetone, but is 30% slower evaporating.
|
Star Brite Instant Hull Cleaner, Gallon from STARBRITE
Formulated extra strong to get the job doneSimply spray or wipe on. Removes scum, algae and rust stains from fiberglass, metal and painted surfaces without rubbing. Extremely strong cleaner, avoid contact with galvanized metal. Removes scum, algae and rust stains. For use on fiberglass, metal and painted surfaces. Avoid contact with galvanized metal.
|
|
from AWLGRIP, Gallon from AWLGRIP, Quart from AWLGRIP
|
|
Home -> Interior, Flags & Gifts -> Gifts -> Gifts & Specialty Items->Nautical Flag Pillows
Signal Flag Decor Pillows 24 x 24.
Part No: CC005
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts->Nautical Flag Pillows
Signal Flag Decor Pillows 24 x 24.
Part No: CC004
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts -> Gifts & Specialty Items
The Pirate Balance Toy is hand made from recycled metal and hand painted in the French tole style. Constructed of tin and iron . Approximately 17.
Part No: TM040
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts -> Gifts & Specialty Items
Newport Sloop by Authentic Models, beautifully detailed and presented. 34" x 39" x 5. 75".
Part No: AS168
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts
A beautiful model of the historic America's Cup Columbia sail boat.
Part No: AS075F
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts -> Gifts & Specialty Items
Authentic models presents the Yacht Ironsides 34" x 39" x 5. 75".
Part No: AS167
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts -> Boat Models
A full fleet of model boats Your personal flotilla of decorative pond yachts is assembled. Models are identical except for hull colors, red, green, blue and black.
Part No: 99W AS057A
|
|
|
|
Home -> Fishing -> Reels -> Conventional Reels
The Avet HX is the premier 2 speed reel in its class. With drag pressures in the 20-24 lb. range and a top end of 28 lbs. , the reel is perfect for a full range of applications. 5:1 gear ratio in high and 2. 1 in low gear. This reel is the answer for either vertical or Yo-Yo jigging. Perfect for using braided lines with a Mono topshot. 550 yds. 60 lb. Spectra.
Part No: 3117-0082
|
|
|
|
Home -> Fishing -> Reels
Lever Drag control system with preset drag feature. Preset drag feature. New cast control system only available from Avet Reels. (prevention of backlash and as an line out adjustment for live bait fishing). Lightweight and topless. 100% machined, Type 2 anodized, True-One piece frame. 8 stainless steel rubber sealed ball bearings and stainless componets. Stronger design with larger line capacity. Extremely stable Avedrag brake system.
Part No: 3117-0021
|
|
|
|
Home -> Fishing -> Reels
Two Speed Model, Gear Ratio H6. 0:1, L2. 8:1 Line capacity: 280yd of 30lb. line mono. Weight: 23 oz. Lever Drag control system with pre-set drag feature. 15 lb Max Drag on Strike with Free Spool. 20 lb Max Drag Setting. New cast control system only available from Avet Reels (prevention of backlash and as an line out adjustment for live bait fishing). 100% machined, Type 2 anodized, True-One piece aluminum frame. 8 stainless steel ball bearings.
Part No: JX6/3
|
|
|
|
Home -> Fishing -> Reels
Single Speed Model, Gear Ratio 5. 8:1 Weight: 18. 2 oz. Line capacity:360yd of 20lb. line mono *Note: Line diameter varies by manufacturer. Lever Drag control system with pre-set drag feature. 9 lb Max Drag on Strike with Free Spool. 16 lb Max Drag Setting. New cast control system only available from Avet Reels (prevention of backlash and as an line out adjustment for live bait fishing). 100% machined, Type 2 anodized, True-One piece aluminum frame. 8 stainless steel ball bearings.
Part No: 3117-0017
|
|
|
|
Home -> Fishing -> Reels -> Conventional Reels
Lever Drag control system with preset drag feature. 9 lb. Max Drag on Strike with Free Spool. Cast control system only available from Avet Reels. (prevention of backlash and as an line out adjustment for live bait fishing) 100% machined, Type 2 anodized, True-One piece aluminum frame. 6 stainless steel ball bearings. Stainless steel fasteners, springs, clips. Stronger design with larger line capacity in its class. Proudly designed, machined and assembled in USA. Includes rod clamp mount.
Part No: 3117-0088
|
|
|
|
Home -> Fishing -> Reels -> Conventional Reels
8:1 Lever Drag control system with pre-set drag feature. 15 lb Max Drag on Strike with Free Spool. 20 lb Max Drag Setting. New cast control system only available from Avet Reels (prevention of backlash and as an line out adjustment for live bait fishing) . 100% machined, Type 2 anodized, True-One piece aluminum frame. 8 stainless steel ball bearings. Stainless steel fasteners, springs, clips. All new revolutionary, extremely stable AveDrag drag washer with smooth control at all conditions.
Part No: 3117-0109
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->AwlCare Polymer Sealer
A non-abrasive, synthetic polymer that is applied by hand and formulated to clean and protect AwlGrip topcoats. Contains no harsh abrasives, will not scratch the painted surface. Leaves a non-yellowing, protective polymer coating. Lasts through multiple washings. Removes mild stains such as water spots and diesel soot.
Part No: O73240/1PTUS
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->AwlCare Polymer Sealer
A non-abrasive, synthetic polymer that is applied by hand and formulated to clean and protect AwlGrip topcoats. Contains no harsh abrasives, will not scratch the painted surface. Leaves a non-yellowing, protective polymer coating. Lasts through multiple washings. Removes mild stains such as water spots and diesel soot.
Part No: 73240/1HGUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->545 Anti-Corrosive Epoxy Primer, (Professional Application Only)
For steel, aluminum, wood or fiberglass. Spray, brush, roll on. Covers up to 497 sq. ft. /gal. Recoat in 12 hours. NOTE: Awlgrip is intended for professional application only and is not available for sale to retail customers.
Part No: OD3001/1QTUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Awl-Cat #3 Brushing Converter - (Professional Application Only)
Standard converter for use in brush or roller application of Awlgrip LPU topside enamels. Normally mixed in a one-part converter to two parts color base ratio.
Part No: OH3002/1PTUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Awl-Cat #2 Spray Converter - (Professional Application Only)
Standard converter for use in spray application of Awlgrip LPU topside enamels. Mixed in a 1:1 ratio.
Part No: OG3010/1QTUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->545 Anti-Corrosive Epoxy Primer, (Professional Application Only)
For steel, aluminum, wood or fiberglass. Spray, brush, roll on. Covers up to 497 sq. ft. /gal. Recoat in 12 hours. NOTE: Awlgrip is intended for professional application only and is not available for sale to retail customers.
Part No: OD3001/1GLUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Alodine 1201 Primer (Professional Application Only)
Gold, chromic acid conversion coating for aluminum prevents corrosion.
Part No: 73003/1GLUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Awl-Cat #3 Brushing Converter - (Professional Application Only)
Standard converter for use in brush or roller application of Awlgrip LPU topside enamels. Normally mixed in a one-part converter to two parts color base ratio.
Part No: OH3002/1HGUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awl-Fair Fairing Compound (Professional Application Only)
Awlfair L. W. is a premium, epoxy trowelable fairing compound used for fairing, levelling and smoothing surface imperfections, caused by gauges, pitting, dents or weld seams. For use above and below the waterline. Super smooth finish and easy sanding. Requires less working time.
Part No: OD7007/1QTUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->Awl-Cat #2 Spray Converter - (Professional Application Only)
Standard converter for use in spray application of Awlgrip LPU topside enamels. Mixed in a 1:1 ratio.
Part No: OG3010/1GLUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->High-Build Epoxy Primer (Professional Application Only)
For pinholes, small depressions and sanding prep. Covers 200 sq. ft. /gal. Recoat in 8 hours. Spray only. .
Part No: OD8002/1QTUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->High-Build Epoxy Primer (Professional Application Only)
For pinholes, small depressions and sanding prep. Covers 200 sq. ft. /gal. Recoat in 8 hours. Spray only. .
Part No: OD3002/1QTUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid->Griptex Non-Skid - (Professional Application Only)
Use on smooth decks, gelcoat decks with non-skid patterns and previously painted non-skid areas.
Part No: O73013/1QTAL
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awlcraft 2000 (Professional Application Only)
This two-component, fast-drying urethane coating provides a long-lasting, buffable finish with excellent gloss and color retention. Do not use below the waterline.
Part No: F8063/1QTUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Non-Sanding Epoxy Primer, (Professional Application Only)
Anticorrosive for aluminum. Needs no sanding. Spray only. Coverage: 300 sq. ft. /gal.
Part No: OS9001/1QTUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Quick Sanding Surfacer (Professional Application Only)
A two component epoxy primer/surfacer that is quick drying and easily sanded.
Part No: OD8003/1GLUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Awl-Fair Fairing Compound (Professional Application Only)
Awlfair L. W. is a premium, epoxy trowelable fairing compound used for fairing, levelling and smoothing surface imperfections, caused by gauges, pitting, dents or weld seams. For use above and below the waterline. Super smooth finish and easy sanding. Requires less working time.
Part No: OD8020/1GLUS
|
|
|