Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. " The newest addition to Ronstan’s Orbit range of super lightweight, fiber-reinforced blocks. Ideal for sheet applications on dinghies up to 16' and control line applications for small keel boats. There are two styles of Series 40 ratchet blocks. Many of the top Grand Prix Laser sailors are switching to Orbit blocks.

5"L T20 Snap Shackle, 31/32" Opening, 31/32" Bail, 10,000lb. MWL from TYLASKA
S. -made shackles offer race-ready high performance, one-handed operation and they can be snapped open under load. Large bail size ideal for additional sheets, spinnakers and other multi-line applications. They have a breaking strength of 5,000 lbs and weigh just 2. 2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats. Tylaska T8 Snap Shackles are perfect for applications requiring high strength and low weight. 5 ounces in the standard bail configuration.

Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .

7/16" G40 Chain, 7200lb. SWL, 21,600lb. Breaking Strength, 2.05lb./ft., 300' Standard Pack from ACCO CHAIN
Hot-Dipped galvanized Grade 40 HT Acco anchor chain! An industry standard, hot-galvanized, high-tensile anchor chain combines both high tensile strength and is resistance to wear. Meets ISO standards . Calibrated to ensure the proper fit for your windlass. 7200 lbs.

12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.

Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.

Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.

ADJ 7-15-DL Whisker Pole, 83"/9lb. Collapsed Length/Weight, 202" Max. Working Length, 2" Tubing Diameters from FORESPAR
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.

29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.

Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.

Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.

Windex 15 Wind Indicator from DAVIS INSTRUMENTS
Improved with bird-proof spike Super-sensitive to slight changes in wind direction at the masthead, Windex Wind Indicators are popular around the world because they offer such an exceptional value. They feature sapphire jewel suspension bearings, large fin/low inertia vanes and easy-to-read, fully adjustable tacking-tab system for quick reference. The choice for most sailors, the Windex 15 features a 15" vane and reflectors for high visibility day and night.

Quicksilver Gear Lube Pump from MERCURY MARINE
Fits all models except Mercury Mariner 2. 2, 4 and 5; Mariner 2, 4, 5, 15, 30, 40 (Japanese origin).

West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.

Type IV Standard Buoyant Cushion - White from KENT
Conventional throwable cushions meet USCG requirements for Type IV PFDs. Comfortable to sit on or to use as a backrest. Durable fabric covers. Heavy polypropylene straps make them easy to throw. Buoyancy: 18 lbs. Dimensions: 15"L x 16"W x 2. 5"H.