Top Sellers
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
|
|
|
|
Rejuvenate 2-Cycle Engine Oil, Pint from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
|
Rejuvenate 2-Cycle Engine Oil, Gallon from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
|
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
TC-W3 100% Synthetic 2-Cycle Outboard Oil from PENNZOIL
This high-flash, ashless 2-cycle engine oil with biodegradable formulation meets or exceeds 2-cycle outboard manufacturer's warranty requirements. It provides excellent lubricity and wear and rust protection in both pre-mix and injection systems. Exceeds NMMA requirements.
|
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.
|
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
|
|
2" from PERKO, 8" from PERKO, 8"H from PERKO, 10"L from PERKO, 8"W from PERKO
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights
Certified for use on sail or power driven vessels under 12 meters. Black plastic and chrome-plated zinc alloy top. Black plastic base. Horizontal surface mount.
Part No: 1201DP0BLK
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Flush Head Threaded Thru-Hull Fittings
Bronze Flush Head Threaded Thru-Hull Fittings.
Part No: 0331DP6PLB
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Replacement Parts for Perko 0493-Series Raw Water Strainers
Replacement Gaskets, Strainer Baskets & Bolts for 0493-Series Strainers.
Part No: 0493DP799M
|
|
|
|
Home -> Engine Systems -> Engine Lubrication->Flush-Pro Engine Flushing/Winterizing System
Why hassle flushing a hot engine when you can do it quickly and easily on a cooled engine at your convenience? Flush-Pro permanently installs in-line with the hose leading to your boat's impeller pump and makes it possible to flush your engine by attaching an ordinary garden hose, saving you time an money. Easy to winterize your boat by using the provided adapter to run antifreeze from a bucket into the Flush-Pro system. Come spring, just flush and dispose of the anti-freeze.
Part No: 0456DP4
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Perko Spare Parts
Spare parts and accessories.
Part No: 1269DP099A
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Chrome plated zinc alloy and black plastic with straight cam bar and flexible plastic strike plate. Detents indicate open or closed position. Door thickness: 1/4" to 1-1/8" . Face plate dimensions: 2-1/2" x 2-1/2" . Adjustment latch bar: 1-1/16" to 2-9/16" .
Part No: 0931DP3BLK
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports
Perko Windshield Adjuster, 8" Adjusts and locks with the twist of a knob. Does not protrude into cabin when closed. Constructed from chrome plated brass with a black plastic knob .
Part No: 1116DP3CHR
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Locking Caps for Deck Fills
Locking caps provide peace of mind. Black Acetal plastic. .
Part No: 1324DP1BLK
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Replacement Lenses for Perko Navigation Lights
Replacement lenses for many of the popular styles of Perko Nav Lights on vessels under 20 meters.
Part No: 0296DP0LNS
|
|
|
|
Home -> Fishing -> Fishing Accessories
Fixed 30° angle with soft black flange gaskets and integral flip-up caps. Available in chrome or polished stainless steel. Chrome Zinc Flange, Aluminum Tube .
Part No: 1205DP0CHR
|
|
|
|
Home -> Plumbing -> Fittings & Valves
Can cut to fit exact hull thickness. One-way rubber flapper valve. Flange dia: 2-15/16". OD: 1-1/2".
Part No: 0343DP
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Chromed Brass Wall Plates
Supplied in sets of two brackets and two wall plates for removable tables. Chrome plated brass. Angle Bracket Dimensions: 2-3/4" x 1-11/16". Wall Plate Dimensions: 3-3/8" x 2".
Part No: 0148DP0CHR
|
|
|
|
Home -> Fishing -> Fishing Accessories->Replacement Parts for Perko Rod Holders
Replacement caps, gaskets lip & liners, sold individually or as complete replacement kits for Perko Rod Holder - see model number for parts matching.
Part No: 0483DP199A
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories
Hatch support brace is chromed-plated brass. Open Length: 10" or 12".
Part No: 0762DP1CHR
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Chocks And Bitts
Chromed zinc line chock has a diagonal opening. 3 1/2" long. 1/2" Line size. Requires #8 fasteners .
Part No: 1223DP0CHR
|
|
|
|
Home -> Ventilation -> Vents -> Exterior Vents->Chromed Brass Clamshell Vents
Type: Passive clamshell vent Material: Chrome-plated brass Warranty: Five years.
Part No: 0339DP0CHR
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Masthead Lights
For powerboats and sailboats. Chrome-plated brass or chrome-plated zinc. Mounting Hardware: #4 FHMS Volts: 12V Draw: 0.
Part No: 0964DP0CHR
|
|
|
|
Home -> Boats & Motors -> Oars & Paddles -> Oars & Paddles Accessories
Genuine leather is still the best for your oars Cushion, protect and silence boat oars with these well-made oar leathers from Perko. Leathers measure 7” x 6 1/2”. Buttons are 1/2” x 13”.
Part No: 0233DP1
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
White plastic, includes screws. White plastic Stainless steel spring Brass, stainless steel screws Catch length: 13/16"" Ball head screw size: 3/4"" x 8 Mounting screw size: 4 R.
Part No: 0554DP
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Chrome plated zinc alloy and white plastic with offset cam bar and flexible plastic strike plate. Detents indicate open or closed position. Door thickness: 1/4" to 1-1/8" . Face plate dimensions: 2-1/2" x 2-1/2" . Adjustment latch bar: 3/8" to 3" .
Part No: 0931DP1WHT
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks -> Catches & Latches
Chromed zinc alloy and black plastic. T-handle drops down flush in either open or closed position unless the cam bar is positioned upward. Installs in 2 1/2" diameter hole.
Part No: 1091DP1BLK
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights
The "universal fit" design of these all round pole lights easily adjusts for up to 20° of rake. Their bright long-life LEDs consume minimal power (less then half of an incandescent bulb) and are corrosion and vibration resistant. Globes are permanently sealed to the body and feature a reduced-glare design. Electrical contacts are gold plated to assure reliable connections and long dependable service in the marine environment. 36" Pole length. Two pole screw positions.
Part No: 1343DP4CHR
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Scoop Strainers
Keeps debris from entering your water-intake lines while promoting a healthy flow of water. Designed for use with an existing thru-hull fitting. Marine UL Listed.
Part No: 0066DP4PLB
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Scoop Strainers
Keeps debris from entering your water-intake lines while promoting a healthy flow of water. Designed for use with an existing thru-hull fitting. Marine UL Listed.
Part No: 0066DP2PLB
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Nav Lights - Fold-Down All-Round
Fold-down, adjustable angle. Horizontal mount with 3/4"dia. anodized aluminum tube, white translucent globe and black plastic base. Includes plastic adapters for flat or “V” type mounting. Contains notch for through-base wiring. Case Material: Plastic . Volts: 12V . Draw: 0. 94A . Pole Material: Anodized Aluminum . Pole Length/Diameter: 13-5/8"H x 3/4"Dia.
Part No: 1134DP0CHR
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Traditional Chrome Bi-Color and Sidelights
For powerboats and sailboats less than 12m or 39. 4'. Chrome-plated brass (except where noted). 1nm visibility. Horizontal and vertical sidelights are sold in pairs. Bi-colors sold individually. Case Material: Chrome-plated brass or zinc (as noted) . Mounting Hardware: #4 FH (Models 281113, 257139, 268724), #8 FH (Models 281097, 199663) sold separately . Volts: 12V . Draw: 0. 80A .
Part No: 1310DP0CHR
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Chocks And Bitts->Line Chocks
Fasteners not included.
Part No: 950000
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis
Chrome-plated. Ideal for shock-cord attachment.
Part No: 1242DP0CHR
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Chrome-plated bronze. . Flat mounting. . Measures: 1-1/2"W x 3"L .
Part No: 1112DP0CHR
|
|
|
|
Home -> Electrical -> Interior Lighting
A rotating shield directs light where you need it. Chrome-plated zinc. Includes 7W bulb. 2-5/8" diameter, cutout 7/8" diameter.
Part No: 1254DP0CHR
|
|
|
