Top Sellers
Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
|
Teak Care - Brightener, Quart from STARBRITE
Clean, brighten and protect your teak in three easy stepsBeautiful teak in three easy steps! Kit contains three pint-sized bottles, one each of Cleaner to remove stains and weathering; Brightener to highlight the natural grain and enhance color; and Oil to seal and protect wood from weather and UV damage. Individual, quart-sized bottles are also available. Cleaner chemically roots out stains, including ugly black mildew stains. Brightener restores teak's lustrous hue.
|
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
Adaptor Fitting for Suzuki & Honda Lower Units from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
Rocker Pump Faucet - Black from FYNSPRAY
Standard equipment on thousands of boats, this practical, rocker-action pump can be used with salt or freshwater. Ultra-simple design disassembles quickly. Plastic body, chrome-plated handle and spout. Material: Brass Capacity: 58 strokes per gallon. Dimensions: 6" above Clearance: 4 3/4" clearance below counter.
|
303 High Tech Fabric Guard, Pint from 303 PRODUCTS
Excellent protectant for Sunbrella upholstery and breathable foul weather gear The only repellency product recommended by and for Sunbrella. Restores lasting water repellency to marine canvas. Stops leaks and protects against soiling and water and oil-based stains. Resists mildew formation and UV sun damage. Spray on, let dry. One pint treats 75–100 square feet of marine canvas. Also a great choice for fabric upholstery, carpeting and breathable foul-weather gear.
|
Polyester Gel-Paste - Pint from EVERCOAT
Gelcoat paste for permanent gelcoat repairsNeutral color polyester paste for permanent gel coat marine repairs. Neatly covers gouges, scrapes and scratches in fiberglass. Use Evercoat coloring agents to create a color match. Hardener included. Pint. Neutral color formulated for use with Evercoat coloring agents (sold separately). Neatly fill gouges and scrapes.
|
Fiberglass Cleaner and Wax - Quart from SEAPOWER MARINE PROD
Cleans and waxes in one easy stepCleans, waxes, seals and protects the fiberglass surface. Contains the finest Carnauba waxes and silicones and removes surface oxidation, residue, dock marks, grease and dirt while leaving behind a durable high-gloss finish. Excellent for hand or machine use. Quart.
|
Match ‘N’ Patch Large Gelcoat Repair Kit from EVERCOAT
Complete kit for a custom color matchYour complete solution for color-matching gelcoat and making minor repairs. Includes verything you need to make minor surface gelcoat repairs. Kit includes:1/4 pint of premium gelcoat paste. 1/4 oz. liquid hardener. six tubes of coloring agents (white, black, yellow, brown and blue). mixing cup & mixing sticks. release film. cleaning solvent.
|
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
Orpine Boat Soap, Quart from ORPIN
Fresh pine scent!Replaces musty mildew odors with a pleasant fresh pine scent. Just one ounce in three gallons of fresh or saltwater will clean a 45'L boat. Biodegradable. Biodegradable.
|
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
|
Chris Craft Stain #573 - Pint from INTERLUX
Chris Craft Stain - Pint Fills grain while staining wood, reducing the number of coats of varnish needed. May also be used on bare mahogany planking before applying primer or sanding surfacer.
|
|
Gallon from PETTIT, Quart from PETTIT, Pint from PETTIT, Black from PETTIT
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Bottom Paint & Coatings->Trinidad Antifouling Bottom Paint
The highest copper loading in the Pettit line Trinidad has earned its reputation over many years by providing excellent long-lasting protection in the toughest antifouling environments. A very high copper content in a hard epoxy base provide a durable and effective finish for both power and sailboats. A good choice for tropical and other warm waters with extreme fouling conditions. Recommended Usage: High fouling areas, year-round immersion, fiberglass, wood and steel hulls . Additives: None.
Part No: 1137806
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 3705-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
Flows on easily and gives the glossy appearance of being sprayedA one-part blend of urethane, silicone and alkyd products. Even brushed or rolled, it gives the high gloss appearance of being sprayed on. For best results, prime surface with Easypoxy White Undercoater. Great for fiberglass, wood or metal. Base Formulation: One-part polyurethane/silicone modified alkyd enamel . Recommended Application Method: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two or more .
Part No: 3108-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Topside Paint
World renowned and the topside of choice for millions of boaters, Z*Spar Enamel is a modified long oil alkyd of exceptional all-around durability. Z*Spar Enamel is a superb finish for all topside surfaces of wood, metal or fiberglass. In general, these paints do not contain UV absorbers. They have high gloss and color retention, but not as high as polyurethanes. Easiest for the amateur to apply using a brush. More compatible with underlying surfaces than polyurethanes.
Part No: 1330308
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid
Ties topcoat to undercoat, regardless of compatibilityGeneral purpose chlorinated rubber used as a primer on metal surfaces and as a tie coat between different types of coatings. Can be used above or below the waterline. Compatible with all antifouling and topside paints. Semi-flat burnt orange color. Brush, roll or spray. Quart kit. Primary Usage: Metal surfaces, underwater running gear, trim tabs . Formulation: General-purpose chlorinated rubber primer . Drying Time: Second coat: 2 hrs.
Part No: 6627-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trinidad SR Antifouling Paint
Dual biocide paint for heavy-fouling areas Combines Pettit’s proven performer with the latest technology in soft-growth antifouling protection, a biocide booster called CIBA Irgarol, which significantly reduces slime, algae and other marine and freshwater organisms. The high copper loading boosted by Irgarol together give you the maximum protection against growth in the most extreme conditions. Voted "Gear of the Year" by Practical Sailor in both 2000 and 2004. Type: Modified epoxy .
Part No: 1277GA
|
|
|
|
Mail-In Rebate Download Rebate Form (PDF) Ablative Technology Reduces Coating Build-Up. Can be launched and Re-launched without repainting . Can be painted up to 12 months before launch .
Part No: 1062
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Bottom Paint & Coatings->Trinidad Antifouling Bottom Paint
The highest copper loading in the Pettit line Trinidad has earned its reputation over many years by providing excellent long-lasting protection in the toughest antifouling environments. A very high copper content in a hard epoxy base provide a durable and effective finish for both power and sailboats. A good choice for tropical and other warm waters with extreme fouling conditions. Recommended Usage: High fouling areas, year-round immersion, fiberglass, wood and steel hulls . Additives: None.
Part No: 1278GA
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
Use as a first step when varnishing mahoganyUsed to fill and permanently stain porous, loosely-grained wood. Wood should be bare, and black water stains should be bleached out. Dark mahogany. Pint. Application: Fill and stain bare wood. 50°F or higher. Colors can be mixed to customize shade . Drying: To recoat: overnight . Thinner, Model 249961: mix 2:1 filler/thinner . Coverage: One pint covers about 50 sq.
Part No: 7665-PT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->120 Brushing Thinner General Purpose
A good general purpose thinner to keep on handGeneral purpose thinner for thinning brushing enamels. Medium-evaporating solvent. Also useful for wiping down surfaces prior to painting.
Part No: 12120-GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Alumaspray Plus
It is safe for use on aluminum outdrives and outboard motors. Resists slime and other marine growth and cleans itself by washing away at a controlled rate when in contact with water. Type: Ablative aerosol; for outdrives and underwater metals. Recommended Usage: Fresh, salt, brackish water; trailerable, dry-stored boats, aluminum lower units on outdrives, outboards. Biocide: Zinc Pyrithione. Number of Coats Recommended: Two over properly-primed metal . sq. to recoat; 16hrs to launch @70°F.
Part No: 1186320
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Copper Bronze Specialty Bottom Paint
Mail-In Rebate Download Rebate Form (PDF) A traditional favorite Modified epoxy antifouling with an attractive, traditional bronze finish. Great for classic runabouts. 33. 2% cuprous oxide provides resistance to algae, barnacles, grass and zebra mussels. Bronze color. Type: Modified epoxy . Recommended Usage: Low to moderate fouling areas; year-round immersion; fiberglass, wood and steel hulls . Biocide: Cuprous oxide. Additives: None. Number of Coats Recommended: Two . Coverage: 100sq.
Part No: 1933-GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 3237-GA
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trinidad SR Antifouling Paint
Dual biocide paint for heavy-fouling areas Combines Pettit’s proven performer with the latest technology in soft-growth antifouling protection, a biocide booster called CIBA Irgarol, which significantly reduces slime, algae and other marine and freshwater organisms. The high copper loading boosted by Irgarol together give you the maximum protection against growth in the most extreme conditions. Voted "Gear of the Year" by Practical Sailor in both 2000 and 2004. Type: Modified epoxy .
Part No: 1277QT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
Flows on easily and gives the glossy appearance of being sprayedA one-part blend of urethane, silicone and alkyd products. Even brushed or rolled, it gives the high gloss appearance of being sprayed on. For best results, prime surface with Easypoxy White Undercoater. Great for fiberglass, wood or metal. Base Formulation: One-part polyurethane/silicone modified alkyd enamel . Recommended Application Method: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two or more .
Part No: 3510-QT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 3720-QT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 3106-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->6980 Rustlok Steel Primer
Easy-to-apply, effective, anti-corrosive barrierOne-part, moisture-cured polyurethane coating locks in and stops the spread of rust on steel, galvanized and stainless steel and cast iron. Forms a dense, waterproof barrier for maximum corrosion resistance. Primary Usage: Trailers and other ferrous metal parts . Applies Over: Steel, cast iron, galvanized and stainless steel . Drying Time: 30 min. Number of Coats Recommended: Three coats minimum . Thinner: 120, Model 249961 . Coverage: 87 sq.
Part No: 6980-GA
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 348-QT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 3350-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->2018 Clear Sealer
For sealing non-oily wood before overcoatingPhenolic resin-based sealer for priming bare wood. Recommended Usage: Priming bare wood before painting (not for teak or other oily woods) . Formulation: Clear phenolic resin based sealer . Recommended Usage: Priming bare wood before painting (not for teak or other oily woods) Formulation: Clear phenolic resin based sealer Application Method(s): Brush (temperature 20°F or higher) . Drying Time: To recoat: 4 hrs (sanding required) . Coverage: 150sq.
Part No: 2018-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->121 Spraying Thinner
For spraying and reducing standard enamels and undercoatersFast-evaporating solvent for reducing standard enamels and undercoaters for spray application. Flashes out rapidly to allow application of a tack coat prior to final coats.
Part No: 12121-GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid
Provides corrosion and rust-resistance on steel or aluminum. A corrosion-inhibiting pigment keeps the metal surface in good condition and enhances adhesion to metal of primers and topcoats applied over it. Not recommended for wood or fiberglass. Drying, Overcoat: 2-24 hours Thinner: Denatured alcohol Coverage: 400-600 sq. ft. /gal.
Part No: 6455/044Q
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
Flows on easily and gives the glossy appearance of being sprayedA one-part blend of urethane, silicone and alkyd products. Even brushed or rolled, it gives the high gloss appearance of being sprayed on. For best results, prime surface with Easypoxy White Undercoater. Great for fiberglass, wood or metal. Base Formulation: One-part polyurethane/silicone modified alkyd enamel . Recommended Application Method: Brush, roller, conventional/airless spray. Number of Coats Recommended: Two or more .
Part No: 1908010
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->6149 Easypoxy White Undercoater
Use to fill small surface blemishes and imperfectionsUse as a base coat for Easypoxy enamels when the surface is less than smooth. Can be applied to fiberglass, wood and previously painted surfaces. Dries quickly. Easy to sand. Formulation: One-part high-build primer. Number of Coats Recommended: One or more, depending on surface condition. Drying Time: To recoat: 2 to 16 hrs. Coverage: 100 sq. ft/qt, 400 sq. ft/gal. .
Part No: 1614906
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 3518-GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Bottom Paint & Coatings->Hydrocoat Antifouling Paint
Easy-to-apply ablative fights bottom growth without build-up The ideal combination of high-speed performance and durability with environmental responsiveness. The end result is multi-season protection with easy clean-up and minimal odor. Hydrocoat is formulated with a 40% cuprous oxide and is tough enough to withstand frequent trailering, launching and beaching. Gallons only. Type: Water-based ablative . Recommended Usage: Fiberglass boats, dry stored and trailered boats . Additives: None .
Part No: 1124006
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 3232-QT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Easypoxy 1-Part Polyurethane Enamel
.
Part No: 3626-QT
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Hydrocoat Antifouling Paint
Mail-In Rebate Download Rebate Form (PDF) Easy-to-apply ablative fights bottom growth without build-up The ideal combination of high-speed performance and durability with environmental responsiveness. Hydrocoat is formulated with a 40% cuprous oxide and is tough enough to withstand frequent trailering, launching and beaching. Environmentally friendly Hydrocoat is used by Sea-Ray on all their new boats. Gallons only. Type: Water-based ablative . Biocide: 40% Cuprous Oxide . Additives: None .
Part No: 1164006
|
|
|
