Top Sellers
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
|
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.
|
RailLight™ Clamp-On Solar-Powered Light from SIMPLY BRILLIANT
Solar-Powered Sol Lights™ RailLight™ charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
|
|
Gas Deck Fill Replacement Cap, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
|
CP Zinc Elbow Catch from PERKO
Chrome-plated zinc with stainless steel spring. . Measures: 1 1/8" x 9/16" . Requires #6 RH screws (Not included).
|
Waste Caddy from TODD ENTERPRISES
Todd Waste Caddy A portable 29-gal. capacity waste removal system. Moves easily on pneumatic tires with plastic bearings. Features a vented cap and 10-foot, 1-1/2"dia. hose and gravity-assisted pump that forces out fluid by gravity for a more rapid transfer. Spring-loaded nozzle eliminates leaks . Bronze ball valve is located at the bottom of the tank . Constructed of cross-linked polyethylene for strength and durability .
|
|
Shaft Seal - 1 1, HS Shaft Seal - 1" x 1 1, Shaft Seal - 2 1
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Cutting Boards
White polyethylene cutting boards come in two sizes: a compact model for countertops, and a medium over-the-sink model. Stores flat, easy to clean and dishwasher-safe. Small: 6" x 10".
Part No: PCB1610
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware
This ”Little Jewel” combo unit is a terrific, space-saving tool. The strong and durable, zinc alloy mechanism helps make mill easy to grind. Made from a mixture of metals and plated with chrome.
Part No: 3180
|
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Cutting Boards
White polyethylene cutting boards come in two sizes: a compact model for countertops, and a medium over-the-sink model. Stores flat, easy to clean and dishwasher-safe. Small: 6" x 10".
Part No: PCB106
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Galley Accessories
Stainless steel with bright finishSharp whistle lets you know when the water boilsClassic shape.
Part No: PTSC-01
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Galley Accessories
PVC coated wire clips are great in the galley for clipping chip bags, in the cockpit or head for drying wet clothes, and lots of other uses aboard or at home in the workroom or office. Set of twelve 2 1/4'' clips.
Part No: GT-6012
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Galley Accessories
Rectangualr flat box grater keeps grated foods from scatteringComes with 4 stainless steel blades.
Part No: HG-84
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-114-214
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-100-134
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-078-134
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-100-200
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-112-300
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-100-112
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-138-214
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-200-312
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-114-200
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-200-300
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-114-134
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-300-412
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-118-134
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-214-400
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-214-312
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-134-300
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-212-312
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-212-400
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-30M-200
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-114-212
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
|
|
|
|
|
A stationary carbon flange is held in contact against a stainless flange, which rotates with the prop shaft. The high-density carbon/graphite flange is attached to the boat by a nitrile bellows which, with the help of water pressure, produces a constant pressure between the carbon and stainless flanges. This mechanical seal is impervious to engine motion and vibration, creating a 100% watertight and maintenance-free seal.
Part No: 02-112-212
|
|
|
