Top Sellers
|
|
|
|
Fuel Filter Primer Pump Kit from RACOR-PARKER FILTRAT
Prime your fuel line reliably every timeRetrofit this kit to most Racor 1000 or 900 series fuel filters, and you can easily reprime your filter and fuel system. Activate a switch, and fuel is drawn into the pre-screen and pumped through the housing, re-filling the unit. When not in use, the filter pump is bypassed and the fuel/water separator system functions normally. Assembly is only 3. 3" tall .
|
Primer Pump Assembly (220, 225, 245) from RACOR-PARKER FILTRAT
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
|
Vent Plug (120, 122, 220 & 225) from RACOR-PARKER FILTRAT
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
|
Seal Service Kit, (220, 225, 245) from RACOR-PARKER FILTRAT
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
|
|
|
Replacement Element for OMC Outboards Only, No Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
|
Spin-On Fuel Filter Vacuum Gauge from RACOR-PARKER FILTRAT
Installs on outlet line and shows when to change filters by indicating an increase in suction. Complete kit includes gauge as well as male and female fittings for installation.
|
Heat Deflector Kit Fits 500MA from RACOR-PARKER FILTRAT
Add to your 500MA, 900MA or 1000MA filter to provide a heat shield and drain plug like ABYC compliant filters.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
Marine Series 1000 Medical Kit from ADVENTURE MEDICAL
The Marine Series 1000 is designed to provide the medical supplies you need for coastal cruising when professional medical care can be reached within a 12 hour time period. The floating, foam padded case protects items and its abrasion-resistant, textured rubber bottom keeps case from sliding on wet surfaces. It’s made of 420 denier nylon with durable, water-resistant coating and a water-resistant zipper to seal out moisture. 5"/420 denier nylon with durable, water-resistant coating.
|
|
|
|
8"D from RACOR-PARKER FILTRAT, 1000 Series from RACOR-PARKER FILTRAT
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters
It is time to replace your fuel filter? Stop guessingThe yellow position indicator progressively fills the window as fuel filter restriction increases, locking at the highest restriction. When the indicator reaches the red zone it is time to change your fuel filter. Press top button to reset. Fits 1/8" NPT female fitting.
Part No: RK32037
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->OMC/Mercury Replacement Gas Filter/Separators
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
Part No: S3221TUL
|
|
|
|
Home -> Engine Systems -> Engine Parts->Parts for 500, 900 & 1000 Turbine Series Filters
Parts for 500, 900 and 1000 Turbine Series Filters.
Part No: RK 11-1404
|
|
|
|
Home -> Engine Systems -> Engine Parts->Gasoline Filter Spin-On Replacement Elements
Gasoline Filter Spin-On Replacement Elements.
Part No: S3232
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Gasoline Fuel Filter/Water Separators
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
Part No: 660R-RAC-02
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Parts for 500, 900 & 1000 Turbine Series Filters
Parts for 500, 900 and 1000 Turbine Series Filters.
Part No: RK15405
|
|
|
|
Home -> Engine Systems -> Engine Parts->Standard Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R24SUL
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Gasoline Filter Spin-On Replacement Elements
Gasoline Filter Spin-On Replacement Elements.
Part No: S3227
|
|
|
|
Home -> Engine Systems -> Engine Parts->200 & 400 Series Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R20S
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Aquabloc® Replacement Elements for Turbine Series
For 200, 500, 900 and 1000 Series Fuel Filters/Water Separators Keep your diesel in top running order .
Part No: 2020TM-OR
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Gasoline Filter Spin-On Replacement Elements
Gasoline Filter Spin-On Replacement Elements.
Part No: S3228TUL
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Diesel Fuel Filters/Water Separators
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
Part No: 120AP
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Parts for 500, 900 & 1000 Turbine Series Filters
Parts for 500, 900 and 1000 Turbine Series Filters.
Part No: 15374
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Gasoline Fuel Filter/Water Separators
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
Part No: 120R-RAC-02
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->200 & 400 Series Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R25S
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->OMC/Mercury Replacement Gas Filter/Separators
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
Part No: B32014
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Standard Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R12T
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->200 & 400 Series Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R15S
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Alarm Sensor 12/24V
Alarm is triggered when water content reaches problematic levels. 2” gauge, water detection module, with light and audio alarms and probe. Runs on 12V or 24V DC.
Part No: RK 21069
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Diesel Fuel Filters/Water Separators
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
Part No: 120RMAM2
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Turbine Series Diesel Fuel Filters/Water Separators
The second stage uses a coalescing ring, which causes the remaining water to form into droplets and fall into the sediment bowl while the dry fuel continues upward. The third stage is an Aquabloc filter, which removes the remaining minute grit. Built-in check valve keeps fuel from draining back into your tank. Fuel Type: Diesel . Mounting Style: Bulkhead mount, cartridge element. Filtering Fidelity: 2 micron, except 30 micron Model 309999 . Drain Fitting: Self-venting . Priming Pump: No .
Part No: 900FH30
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Turbine Series Diesel Fuel Filters/Water Separators
The second stage uses a coalescing ring, which causes the remaining water to form into droplets and fall into the sediment bowl while the dry fuel continues upward. The third stage is an Aquabloc filter, which removes the remaining minute grit. Built-in check valve keeps fuel from draining back into your tank. Fuel Type: Diesel . Mounting Style: Bulkhead mount, cartridge element. Filtering Fidelity: 2 micron, except 30 micron Model 309999 . Drain Fitting: Self-venting . Priming Pump: No .
Part No: 1000FH2
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Turbine Series Diesel Fuel Filters/Water Separators
The second stage uses a coalescing ring, which causes the remaining water to form into droplets and fall into the sediment bowl while the dry fuel continues upward. The third stage is an Aquabloc filter, which removes the remaining minute grit. Built-in check valve keeps fuel from draining back into your tank. Fuel Type: Diesel . Mounting Style: Bulkhead mount, cartridge element. Filtering Fidelity: 2 micron, except 30 micron Model 309999 . Drain Fitting: Self-venting . Priming Pump: No .
Part No: 500FG2
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->OMC/Mercury Replacement Gas Filter/Separators
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
Part No: B32021MAM
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->200R Spin-On Series Diesel Fuel Filter/Water Separator
Aquabloc filter media repels water into drain bowl, assuring virtually 100% removal of water and solid contaminants. Fuel Type: Diesel . Mounting Style: Bulkhead mount, spin-on element . Filtering Efficiency: 2 micron . Mounting Head: Die-cast aluminum . Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer plastic . Drain Fitting: Self-venting .
Part No: 230R2
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Aquabloc® Replacement Elements for Turbine Series
For 200, 500, 900 and 1000 Series Fuel Filters/Water Separators Keep your diesel in top running order .
Part No: 2010PM-OR
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Gasoline Fuel Filter/Water Separators
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
Part No: 120R-RAC-01
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Aquabloc® Replacement Elements for Turbine Series
For 200, 500, 900 and 1000 Series Fuel Filters/Water Separators Keep your diesel in top running order .
Part No: 2020PM-OR
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Gasoline Fuel Filter/Water Separators
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
Part No: 110A
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Gasoline Filter Spin-On Replacement Elements
Gasoline Filter Spin-On Replacement Elements.
Part No: S3232TUL
|
|
|
