Top Sellers
PAR-Max 4 Water-System Pump, 12V from JABSCO
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).
|
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
|
|
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
|
|
Rejuvenate 2-Cycle Engine Oil, Pint from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
|
Rejuvenate 2-Cycle Engine Oil, Gallon from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
|
TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .
|
TC-W3 100% Synthetic 2-Cycle Outboard Oil from PENNZOIL
This high-flash, ashless 2-cycle engine oil with biodegradable formulation meets or exceeds 2-cycle outboard manufacturer's warranty requirements. It provides excellent lubricity and wear and rust protection in both pre-mix and injection systems. Exceeds NMMA requirements.
|
12 Volt White Dual Trumpet Mini Air Horn from AFI
White epoxy powder-coated finish over solid brass. Noncorrosive Lexan® diaphragm. 12vDC. . Draws 20 amps max. Includes compressor, air tubing, fittings, and hardware. 5" W x 3-3/4"H x 9-1/2" L.
|
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
|
Drop-In Hidden Horn from AFI
Designed for easy installation, this hidden horn mounts from the outside. Compact in size, but capable of 107db loudness. Comes with both black and white snap-on ASA plastic grilles. A weatherproof fabric liner lets sound through, but keeps water out. Prewired for 12V installation. Material: ABS plastic . Loudness dB: 107dB . Design Standards: Meets ABYC specs for boats up to 12 meters . Dimensions: 2"H x 3-3/8"W x 3-1/4"D . Power Requirements: 12 Volts .
|
Stainless-Steel Compact Electric Horn - Double from AFI
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
LP Enamel - Hatteras White, Quart from STERLING
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
|
|
2" from AFI, 4" from AFI, O from AFI, 20" from AFI, 22" from AFI, 90IN from AFI
|
|
Home -> Safety -> First Aid & Medical
Adventure Medical Kits GlacierGel Advanced Blister and Burn Dressings benefit from patented second-generation hydrogel technology. The waterproof, breathable adhesive gels are highly cushioning, cooling and absorbent, which provides instant and complete pain relief. GlacierGel contains 50% water and provides an instant and effective cushion against subsequent friction to the sensitive skin.
Part No: 0155-0552
|
|
|
|
Home -> Safety -> First Aid & Medical
This super-rugged, multi-use kit is great for any adventure where conditions may be adverse. Packed in a high-quality welded dry bag, it includes basic first aid components and must-have survival items such as Aquaseal® urethane adhesive, waterproof storm matches and a 2-person Heatsheet® thermo-reflective blanket with printed survival instructions. An excellent choice for all small watercraft, inflatables, kayaks and canoes—enough medical care for groups up to 6 people. 5" .
Part No: 0110-0260
|
|
|
|
Home -> Safety -> First Aid & Medical->QuikClot® Sport Clotting Sponge
Stops moderate to severe bleeding until further medical help is available. Primarily developed for the military, QuikClot® is a chemically inert material that speeds coagulation of blood, resulting in a stable clot that stops bleeding significantly faster than conventional methods and is safe to leave on wounds until more advanced medical help arrives.
Part No: 5020-0007
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Greek Fishermans Cap
Authentic cap keeps the heat in and the chill out with consummate style. 85% wool, 15% nylon.
Part No: BLACK-7 1/2
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Greek Fishermans Cap
Authentic cap keeps the heat in and the chill out with consummate style. 85% wool, 15% nylon.
Part No: BLACK-7
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Greek Fishermans Cap
Authentic cap keeps the heat in and the chill out with consummate style. 85% wool, 15% nylon.
Part No: BLACK-7 1/8
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Greek Fishermans Cap
Authentic cap keeps the heat in and the chill out with consummate style. 85% wool, 15% nylon.
Part No: BLACK-7 1/4
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Greek Fishermans Cap
Authentic cap keeps the heat in and the chill out with consummate style. 85% wool, 15% nylon.
Part No: BLACK-7 3/8
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Teak & Starboard->Teak Winch Pads
.
Part No: 60474
|
|
|
|
Home -> Interior, Flags & Gifts -> Flags & Staffs->Teak Ensign Staffs
Teak Ensign Staffs Our traditional staffs are made of natural teak. which retains its good looks with a minimum of maintenance.
Part No: 60752
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Swim Platforms/Steps->Teak & Poly Swim Platforms
.
Part No: 67901
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Wipers
Install your own windshield washer systemFits new or existing AFI Deluxe wiper arm and blade sets, with all the parts to outfit two wiper arms. The kit includes a 3 liter water tank with mounting bracket (8. 5"H x 7"W x 4. 5"D), 12V pump motor and 16' below deck clear tubing, 6' above deck black tubing, clips and sprayer fittings. You supply wiring, an in-line 3A fuse and On-Off momentary switch.
Part No: 33505
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Swim Platforms/Steps->Teak & Poly Swim Platforms
.
Part No: 67902
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->AFI-500 Waterproof Wiper Kits
The 12V motor in this frame-mounted, self-parking, adjustable sweep and park wiper kit is encased in a UV-stabilized, temperature- and impact-resistant, waterproof housing. Includes 11" curved blade and adjustable arm. Arm length: 6-3/4" to 10-1/2". Style: Interior/Exterior . Sweep Direction: Both. Case Material: UV-stabilized, high-impact, high-temperature thermoplastic . Draw: 2 amps @ 12 V. Maximum Arm Length: 14" x 14" arm/blade combination.
Part No: 30005
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Wipers->Pantographic Wiper Arms
Pantographic arms allow the wiper blade to remain in a vertical orientation, sweeping a more useful pattern on the windshield. Corrosion resistant construction holds up to salt water, and the motor shaft mount has a set screw for secure clamping. Includes an "articulated bend back" feature for easy window cleaning. Requires a heavy-duty motor with a 5/8" shaft. Fits the AFI 2000 and MRV motors.
Part No: 33090
|
|
|
|
Keep rods organized with these attractive holders. Not predrilled. Sold in pairs.
Part No: 60614
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->XL Plus Trumpet Horns
These very loud horns are built to last due to their sealed sound units. They feature exclusive over-molded motor housings for extra protection and a longer life than other similar horns. Stainless-steel, rust- and corrosion-proof construction of the key components. Includes an international horn signal card and mounting hardware. Sealed sound unit keeps moisture out.
Part No: 10029XLP
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes
Blades are designed to work only with their counterpart Classic, Deluxe or Standard arms.
Part No: 33017
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Swim Platform Brackets
A simple way to mount your swim platform. 304 stainless steel brackets, 1. 5"W flat bar stock for the underside of the platform and transom.
Part No: 60996
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Teak & Starboard->Teak Winch Pads
.
Part No: 60465
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage->Polyethylene Drink or Air Horn Holder
Durable and attractive, these cup holders do double duty as air horn holders - order the insulated models to keep your beverage hot or cold longer! High-density polyethylene.
Part No: 65606
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->1.5 Heavy-Duty Wiper Motor
Powers a 22" Deluxe arm and 22" Deluxe blade combination or a 20" Premier arm and 20" Premier blade combination. Fully sealed powdercoated aluminum waterproof base and housing. RF shielded circuitry. Factory pre-set sweep angles of 80° or 110° with easy adjustments of 45° or 60°. 12V electrical system. Two-speed motor. Style: Interior/Exterior . Sweep Direction: Both . Self-Parking: Yes . Case Material: Aluminum . Draw: No-load current 0.
Part No: 71012
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33022S
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33002
|
|
|
|
Home -> Cabin & Galley -> Barbecues & Tables->Teak Captain's Chairs
A taller version of the director’s chair, this chair is sized for a bar or counter area. Constructed of solid, oil-finished teak with brass hardware.
Part No: 60048
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33919
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Swim Platforms/Steps->Teak & Poly Swim Platforms
.
Part No: 67903
|
|
|
|
Home -> Cabinet & Deck Hardware -> Rail Fittings & Rub Rail -> Hand Rails->Teak Handrails
Handrails are beautiful teak. Handrails are 1 1/16W x 2 1/4"H. 1 loop: 13"L. 2 loop: 23"L. 3 loop: 33"L. 4 loop: 43"L. 5 loop: 53"L.
Part No: 60102
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Teak & Starboard->Teak Winch Pads
.
Part No: 60468
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage -> Poly Storage Products
White Poly Accessories White poly accessories from AFI Small binocular rack .
Part No: 65702
|
|
|