Welcome! Please Sign-In
Top Sellers
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
Series 150 Clear PVC Tubing, 1/4"ID, 60psi Burst Pressure from SHIELDS RUBBER
Series 150 Clear PVC Tubing, 1/4"ID, 60psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
Flush Lock and Latch from PERKO
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
Gusher 10 Pump from WHALE PUMPS
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
12V Reversible Flo-Master Vane Pump from GROCO
12V Reversible Flo-Master Vane Pump from GROCO
Rigid-vane pumps for pumping water, oil or diesel. Positive-displacement pump is self-priming to 2’. Long-lasting, continuous-duty, ignition-protected motor has ball bearings and a #316 stainless-steel shaft Application: General light to intermittent duty utility pumping . Gallons Per Minute: 6. 5 (oil) . Material: Bronze pumphead, stainless shaft . Port Sizes: Male garden hose or 1/2" female NPT inlet & outlet . Dimensions: 3 3/8"H x 4 3/8"W x 7 1/2"L .
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
Electric Bilge Pump Installation Kit from ANCOR MARINE
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
Big-T Rotary Helm from TELEFLEX
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
Washdown Fitting with Adapter from JABSCO
Washdown Fitting with Adapter from JABSCO
This unique fixture allows you to engage and disengage your wash-down hose under full pressure, eliminating the need for fiddling with a faucet. Bulkhead fitting features beefy cast stainless steel construction. Includes ABS hose adapter with 1" garden hose threads. 3/4" inlet port. 3" flange. 3 1/2"L.
DE-0051 AC/DC Refrigerator/Freezer from NORCOLD
DE-0051 AC/DC Refrigerator/Freezer from NORCOLD
This compact unit with galvanized exterior is an improved version of its predecessor, the DE-451. For starters, it’s nearly 10% quieter. Its corner-mounted compressor is more secure. Hinges, latches and shelves are stronger, freezer shelf is larger and reversible door affords flexible installation. Removable, black door panel included. This refrigerator fits into the same cutout as the older, DE451 version; making an update/upgrade easy. Overall size: 20-3/4" x 19-3/4" x 23".
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
Windshield Screw Cover Foam, 1/4"H x 3/4"W x 8'L from TACO PRODUCTS
Windshield Screw Cover Foam, 1/4"H x 3/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
Hatch - Ocean 60 Flat Base from LEWMAR
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".

x 1' L from B, 2' L from B, 8" L from B, 4" W x 3' L from B

Premium Lounge Seat, Blue from B And M SEATING Home -> Seating & Covers -> Seating->Designer Lounge Seat
Back to Back Runabout 10" Base Lounge Seat (BM705P). Injection molded plastic seat frame stands up to the elements. High compression foam padding. 28oz. Marine Grade vinyl. Storage space compartment. Folds out for lounging. Easy assembly. Seat Height 27. 5" . Width 19" .
Part No: BM705P-1-711
Premium Lounge Seat, Sand/Chestnut from B And M SEATING Home -> Seating & Covers -> Seating->Designer Lounge Seat
Back to Back Runabout 10" Base Lounge Seat (BM705P). Injection molded plastic seat frame stands up to the elements. High compression foam padding. 28oz. Marine Grade vinyl. Storage space compartment. Folds out for lounging. Easy assembly. Seat Height 27. 5" . Width 19" .
Part No: BM705P-1-662
Premium Jump Seat, Gray from B And M SEATING Home -> Seating & Covers -> Seating->Designer Jump Seat
Matching Jump Seat to BM705P Lounge. Same construction componets as lounge with storage compartment. Must place against back for mounting. Seat Height 27. 5" . Width 16. 75" . Depth 17. 5" . Base Height 10" .
Part No: BM1410P-717
Premium Jump Seat, Sand from B And M SEATING Home -> Seating & Covers -> Seating->Designer Jump Seat
Matching Jump Seat to BM705P Lounge. Same construction componets as lounge with storage compartment. Must place against back for mounting. Seat Height 27. 5" . Width 16. 75" . Depth 17. 5" . Base Height 10" .
Part No: BM1410P-715
Premium Jump Seat, Blue from B And M SEATING Home -> Seating & Covers -> Seating->Designer Jump Seat
Matching Jump Seat to BM705P Lounge. Same construction componets as lounge with storage compartment. Must place against back for mounting. Seat Height 27. 5" . Width 16. 75" . Depth 17. 5" . Base Height 10" .
Part No: BM1410P-711
Premium Jump Seat, White from B And M SEATING Home -> Seating & Covers -> Seating->Designer Jump Seat
Matching Jump Seat to BM705P Lounge. Same construction componets as lounge with storage compartment. Must place against back for mounting. Seat Height 27. 5" . Width 16. 75" . Depth 17. 5" . Base Height 10" .
Part No: BM1410P-710
Premium Jump Seat, Gray/Charcoal from B And M SEATING Home -> Seating & Covers -> Seating->Designer Jump Seat
Matching Jump Seat to BM705P Lounge. Same construction componets as lounge with storage compartment. Must place against back for mounting. Seat Height 27. 5" . Width 16. 75" . Depth 17. 5" . Base Height 10" .
Part No: BM1410P-664
Premium Jump Seat, Red/White from B And M SEATING Home -> Seating & Covers -> Seating->Designer Jump Seat
Matching Jump Seat to BM705P Lounge. Same construction componets as lounge with storage compartment. Must place against back for mounting. Seat Height 27. 5" . Width 16. 75" . Depth 17. 5" . Base Height 10" .
Part No: BM1410P-0032
Premium Jump Seat, Sand/Chestnut from B And M SEATING Home -> Seating & Covers -> Seating->Designer Jump Seat
Matching Jump Seat to BM705P Lounge. Same construction componets as lounge with storage compartment. Must place against back for mounting. Seat Height 27. 5" . Width 16. 75" . Depth 17. 5" . Base Height 10" .
Part No: BM1410P-662
Casting Pro Seat, Red from B And M SEATING Home -> Seating & Covers -> Seating->Casting Pro Seat
Pro Butt Seat is utilized for fishing boat casting decks. Injection molded frame. High compression foam padding. 28oz. Marine vinyl. Mounts on any BIA standard pedestal system with 4 bolts included Seat Width 15. 5". Depth 11" . Height 5.
Part No: BM112BP-712
Casting Pro Seat, Gray from B And M SEATING Home -> Seating & Covers -> Seating->Casting Pro Seat
Pro Butt Seat is utilized for fishing boat casting decks. Injection molded frame. High compression foam padding. 28oz. Marine vinyl. Mounts on any BIA standard pedestal system with 4 bolts included Seat Width 15. 5". Depth 11" . Height 5.
Part No: BM112BP-717
Casting Pro Seat, Blue from B And M SEATING Home -> Seating & Covers -> Seating->Casting Pro Seat
Pro Butt Seat is utilized for fishing boat casting decks. Injection molded frame. High compression foam padding. 28oz. Marine vinyl. Mounts on any BIA standard pedestal system with 4 bolts included Seat Width 15. 5". Depth 11" . Height 5.
Part No: BM112BP-711
E-Z Foldz Step Stool, Blue from B And R PLASTICS Home -> Cabin & Galley -> Containers & Storage -> Containers, Boxes, Bins->E-Z Foldz Step Stool
E-Z Foldz step stool are perfect for space hungry boats. not to mention being super handy around the house and garage!Sturdy plastic stool holds up to 300 lbs. and folds to less than two inches wide for storage. Size Unfolded: 9" L x 10 3/4" W x 8 3/4" H. Size Folded: 1 1/2" L x 10 3/4" W x 13 1/2" H. 300 Lb Capacity. Material: Plastic.
Part No: 101-6B
E-Z Foldz Step Stool, Black from B And R PLASTICS Home -> Cabin & Galley -> Containers & Storage -> Containers, Boxes, Bins->E-Z Foldz Step Stool
E-Z Foldz step stool are perfect for space hungry boats. not to mention being super handy around the house and garage!Sturdy plastic stool holds up to 300 lbs. and folds to less than two inches wide for storage. Size Unfolded: 9" L x 10 3/4" W x 8 3/4" H. Size Folded: 1 1/2" L x 10 3/4" W x 13 1/2" H. 300 Lb Capacity. Material: Plastic.
Part No: 101-6BK
E-Z Foldz Step Stool White from B And R PLASTICS Home -> Cabin & Galley -> Containers & Storage -> Containers, Boxes, Bins->E-Z Foldz Step Stool
E-Z Foldz step stool are perfect for space hungry boats. not to mention being super handy around the house and garage!Sturdy plastic stool holds up to 300 lbs. and folds to less than two inches wide for storage. Size Unfolded: 9" L x 10 3/4" W x 8 3/4" H. Size Folded: 1 1/2" L x 10 3/4" W x 13 1/2" H. 300 Lb Capacity. Material: Plastic.
Part No: 101-6
Stow & Tow, Dual Ball Mount, 2-5/16" x 2" from B And W TRAILER HITCH Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers->Tow & Stow
This versatile and convenient hitch eliminates the need for multiple ball mounts, so you can use one hitch for multiple trailers. Simply pull the pin and rotate to the desired ball size. Pull the stainless steel pins on the adjustment block and adjust the hitch up or down (in one inch increments) for a safe level tow. It compactly stows under your vehicle when not in use. Fits any standard 2" receiver hitch and holds a Class IV (10,000 lb. ) tow rating.
Part No: TS10033BP
Stow & Tow, Tri Ball Mount, 1-7/8" x 2" x 2-5/16" from B And W TRAILER HITCH Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers->Tow & Stow
This versatile and convenient hitch eliminates the need for multiple ball mounts, so you can use one hitch for multiple trailers. Simply pull the pin and rotate to the desired ball size. Pull the stainless steel pins on the adjustment block and adjust the hitch up or down (in one inch increments) for a safe level tow. It compactly stows under your vehicle when not in use. Fits any standard 2" receiver hitch and holds a Class IV (10,000 lb. ) tow rating.
Part No: TS10047BP
7/8" Thick x 4" W x 3' L from B. AXELROD Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.87 3.87 3.0
3/8" Thick x 5 3/4" W x 3' L from B. AXELROD Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.37 5.75 3.0
7/8" Thick x 3 3/4" W x 1' L from B. AXELROD Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.87 3.87 1.0
1/2" Thick x 1 3/4" W x 3' L from B. AXELROD Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.50 1.87 3.0
7/8" Thick x 1 3/4" W x 4' L from B. AXELROD Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.87 1.87 4.0
7/8" Thick x 7/8" W x 2 1/2' L from B. AXELROD Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.87 0.87 2.0
1/2" Thick x 1 3/4" W x 2 1/2' L from B. AXELROD Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.50 1.87 2.5
1/2" Thick x 1 3/4" W x 6' L from B. AXELROD Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.50 1.87 6.0
3/8" Thick x 5 3/4" W x 5' L from B. AXELROD Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.37 5.75 5.0
7/8" Thick x 3 3/4" W x 3 7/8" L from B. AXELROD Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.87 3.87 4.0
3/8" Thick, x 5 3/4" W, x 1' L from B. AXELROD Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Lumber
For over three centuries Van de Stadt has been supplying timber from Zaandam in the Netherlands to the boatbuilding industry as wooden mercantile vessels of the past have transitioned to the luxury yachts of today. Van de Stadt teak is air-dried before kiln drying to ensure a pleasant, homogenous appearance to the color and grain.
Part No: 0.37 5.75 1.0
Ready-Strip® Marine, Gallon from BACK TO NATURE PRODU Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Ready-Strip® Marine Paint Stripper
An environmentally safer alternative to caustic paint removers that contain methylene chloride, Ready-Strip is formulated to remove up to five layers of marine antifouling, topside paints and varnishes in one application. The process is simplified by its blue color which turns white or light blue when paint is ready to be removed. Biodegradable, non-flammable, odor-free and it easily cleans up with water.
Part No: RM01
Ready-Strip® Marine, Quart from BACK TO NATURE PRODU Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Ready-Strip® Marine Paint Stripper
An environmentally safer alternative to caustic paint removers that contain methylene chloride, Ready-Strip is formulated to remove up to five layers of marine antifouling, topside paints and varnishes in one application. The process is simplified by its blue color which turns white or light blue when paint is ready to be removed. Biodegradable, non-flammable, odor-free and it easily cleans up with water.
Part No: RM25
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12