Top Sellers
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Antifreeze, -100 Engine & Water System - Gallon from SEAFIT
West Marine Pure Oceans -100° (-73°C) Marine Antifreeze provides the ultimate in extreme cold weather and corrosion protection for drinking water systems and all engines. Its premium additive package prevents corrosion of aluminum, copper, brass and solder, but will not harm rubber, seals or hose materials. Provides burst protection to -100°F (-73°C) and freeze protection within a range of -58°F to -63°F (-50°C to - 52°C).
|
DELO 100 Diesel Engine Oil - SAE 30 5 gallons from CHEVRON
Recommended for use in older 2 and 4 stroke marine diesel engines, Chevron DELO 100 motor oils utilize the latest technology to provide excellent performance in older engines using either normal, high, or low sulfur fuels. The SAE 30 and 40 grades are specifically designed for 2-stroke diesel engines requiring highly effective control of wear and deposits. DELO 100 oils comply with Detroit Diesel Corporation 2-stroke engine requirements, including the 0.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. " The newest addition to Ronstans Orbit range of super lightweight, fiber-reinforced blocks. Ideal for sheet applications on dinghies up to 16' and control line applications for small keel boats. There are two styles of Series 40 ratchet blocks. Many of the top Grand Prix Laser sailors are switching to Orbit blocks.
|
Ratchet Orbit Block, Cheek, Counter-Clockwise, 550lb. SWL, 2.7oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. It can be set at a 0 or 90 degree orientation, provides stress-free articulation without allowing the block to over-rotate, and is locked in place with a security clip that doesnt require tools to fit. The Dyneema link is also more compatible with carbon, Dyneema and webbing connection points than steel loop tops or shackles.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.
|
Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.
|
PVC with Polyurethane Mesh Rope Bag, 11-13/16"W x 16-11/16"H x 8-11/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
|
Acrylic Canvas Drink Holder, 5-1/8"W x 5-1/8"H x 3-9/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
|
Tiller Clip from RONSTAN
Nylon tiller extension retaining clip. Fits extensions up to 1"dia.
|
Furling Lead Block from RONSTAN
A sleek, snag-free way to lead your furler's lines back to the cockpit. Clamps around the 7/8" or 1" stanchion tubing, so you don't have to drill any holes.
|
C-10 Thermostat Controller from KASCO MARINE INC.
Kasco's NEW C-10 Thermostat Controller is designed to save you money on your electric bills The C-10 differs from our existing C-20 Controller, in that, it only uses Air Temperature to operate the De-Icer. Simply use the dial to set a temperature in which you want the De-Icer to turn on and plug the C-10 into a standard 120V outlet.
|
|
from RONSTAN, 6oz, 7oz, 0, 10, ), SWL, 870 SWL, SWL, 100 SWL, SWL from RONSTAN, 1, 660 SWL
|
|
Home -> Cabin & Galley -> Containers & Storage->Ship Grips
ShipGrips will instantly add a non-slip surface to just about anything on your boat. Simply peel and stick. The unique holding power of ShipGrips will keep your gear in place under extreme conditions. ShipGrips are: Waterproof: Grips great both wet or dry . Thin and flexible . Nearly invisible on most surfaces: Allows your object or boat color show through . Dishwasher- and microwave-safe. one sheet with assorted shapes and sizes. Pre-cut for easy application .
Part No: 40010410
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage->Ship Grips
ShipGrips will instantly add a non-slip surface to just about anything on your boat. Simply peel and stick. The unique holding power of ShipGrips will keep your gear in place under extreme conditions. ShipGrips are: Waterproof: Grips great both wet or dry . Thin and flexible . Nearly invisible on most surfaces: Allows your object or boat color show through . Dishwasher- and microwave-safe. one sheet with assorted shapes and sizes. Pre-cut for easy application .
Part No: 40100450
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Rollapal Roller Shafts
Zinc-plated, Solid-steel, greaseable shafts. With standard grease fittings.
Part No: 727
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Rollapal Roller Shafts
Zinc-plated, Solid-steel, greaseable shafts. With standard grease fittings.
Part No: 729
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Rollapal Roller Shafts
Zinc-plated, Solid-steel, greaseable shafts. With standard grease fittings.
Part No: 730
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
Part No: RF6710
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Carabiners & Snaphooks->Sister Clips
Sister clips are a simple, effective means of quickly attaching and detaching ropes.
Part No: RF89
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Eye Straps
Eye straps are convenient for lashing points and attaching control line leads or blocks.
Part No: RF1056
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Series 50 All-Purpose Blocks
.
Part No: RF51500
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Eye Straps
Eye straps are convenient for lashing points and attaching control line leads or blocks.
Part No: 635.20
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Nylon Bulls-Eye Fairleads
Great for minor direction changes in line. Also good for containing line hanging along booms. Nylon deadeyes are available with or without insert.
Part No: RF9
|
|
|
|
Home -> Cordage -> Rigging Products
Going aloft? Take it one step at a time! Rugged, low-windage steps. Snag-free design won’t catch halyards. 316 stainless, with diamond patterned non-slip tread. These should be spaced 18-24" apart, staggered right and left except underneath spreaders and at the masthead. Weight 3oz each.
Part No: RF6092
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->Carbon Fiber C-Cleats & Accessories
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.
Part No: RF5015
|
|
|
|
Home -> Sailboat -> Blocks->Series 20 Blocks
Two-stage bearing system with stainless-steel ball bearings handles very high safe working loads. Designed for small diameter, high-tech line on high-performance dinghies and control lines on sport and race boats. Each double and triple block offers a formed loop head and extra shackle for mounting versatility. Sheave: Acetal plastic. Sheave Size: 3/4" (20mm). Line Diameter: 1/4" max. Cheek Material/Finish: Stainless and textured fiber-reinforced Zytel.
Part No: RF20111
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Series 30 Ball-Bearing Mini Blocks
.
Part No: RF30174
|
|
|
|
Home -> Sailboat -> Blocks->Wire Blocks
Single blocks can double the power of a rope tackle using a cascading block system. Blocks up to 1" sheave diameter are stainless steel with nickel-plated brass sheaves. Blocks over 1" sheave diameter have removable anodized aluminum sheaves with Delrin® bushings. Micro Kite Blocks are very strong, super-lightweight.
Part No: RF13101-2
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Diamond-Base Screw-In Pad Eyes
Ronstan pad eyes suit a range of load requirements. They are available in bolt-through or bolt/screw-down styles, and some are supplied with mounting pads to protect surfaces and facilitate sealing.
Part No: RF44
|
|
|
|
Home -> Sailboat -> Blocks -> Fairlead Blocks->Series 60 Ratchet Blocks
Great for dinghy mainsheets on boats such as the Laser, 470 and 49er. Spinnaker sheets on dinghies, especially modern asymmetric classes, sportboat mainsheet systems, vang, traveller and control lines on larger boats. Pivoting lead blocks are great for sportboats and small keelboat spinnaker sheets and other control line applications on larger boats. One of the switches can be removed if desired. Ball Bearings: Carbon Black Acetal, Torlon® ratchet pawl . Sheave Size: 2-3/8" (60mm) .
Part No: RF62175
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Microloc Tamper-Resistant Clevis Pin
Microloc turnbuckles are a compact all Stainless Steel solution for use in applications where tensioning is required but space and weight are at a premium. The sleek fork ends can be quickly and easily secured with ‘easy access’ split rings or Tamper-Resistant clevis pins for added security.
Part No: RF5300-03
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Series 60 Multi-Purpose Blocks
Black cheeks are made from chromed stainless steel for good looks and strength. Flared line entry reduces chafe and allows line to run freely. Universal swivel head lets you select alignment of block. Stainless steel cheeks and load straps, Acetal sheaves. Sheave: UV stabilized Acetal. Bearings: Plain bearings. Sheave Size: 2-2/3" (60mm). Line Diameter: 1/2" max. . Cheek Material/Finish: Stainless, polished and black chromed. Shackle/Strap Type: Universal head shackle.
Part No: RF1160+
|
|
|
|
Home -> Sailboat -> Blocks->Series 55 Ball-Bearing Orbit Blocks™
The precision design provides the optimum number of ball bearings in critically loaded areas, eliminates them in inactive areas and reduces ineffective mass, creating the "2-stage" bearing system for durability and low friction performance. The flexible Dyneema® rope link is a product of the latest trends in grand prix ocean racing and provides a more flexible, lighter weight and lower profile solution than traditional shackles. Sheave Size: 2-5/32" (55mm).
Part No: RF55101
|
|
|
|
Home -> Sailboat -> Blocks->Series 55 Ball-Bearing Orbit Blocks™
The precision design provides the optimum number of ball bearings in critically loaded areas, eliminates them in inactive areas and reduces ineffective mass, creating the "2-stage" bearing system for durability and low friction performance. The flexible Dyneema® rope link is a product of the latest trends in grand prix ocean racing and provides a more flexible, lighter weight and lower profile solution than traditional shackles. Sheave Size: 2-5/32" (55mm).
Part No: RF55521
|
|
|
|
Home -> Sailboat -> Blocks->Series 40 Ball Bearing Orbit Blocks™
The newest addition to Ronstans Orbit range of super lightweight, fiber reinforced blocks. Series 40 Ratchet blocks feature 14:1 holding power and a sophisticated cross-hole sheave geometry for superior rope wear performance. The automatic version is ideal for asymmetric spinnakers and other applications where an auto-engaging ratchet is preferred. Ball Bearings: High compression strength Carbon Black Acetal, Stage 2 bearing: Glass fiber reinforced, MoS2 impregnated engineered nylon.
Part No: RF45531
|
|
|
|
Home -> Sailboat -> Blocks->Wire Blocks
Single blocks can double the power of a rope tackle using a cascading block system. Blocks up to 1" sheave diameter are stainless steel with nickel-plated brass sheaves. Blocks over 1" sheave diameter have removable anodized aluminum sheaves with Delrin® bushings. Micro Kite Blocks are very strong, super-lightweight.
Part No: RF104
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Genoa Track Slides
Tough plastic inserts allow Ronstan’s stainless steel genoa cars to move easily without scarring the track.
Part No: RC73202
|
|
|
|
Home -> Sailboat -> Blocks->Series 40 All-Purpose Blocks
Much stronger than other same-size blocks and much more compact than other blocks handling the same loads. “Smart” features include a unique captive lock universal head fitting and an adjustable cam arm. The ball bearing blocks feature Ronstan’s two-stage bearing system, which has exceptional low-friction performance and very high maximum working loads. For dinghies and keelboats to 26'. Bearings: Two-stage acetal ball bearing system or plain bearing. Sheave Size: 1-9/16" (40mm). ).
Part No: RF41500
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Snap Shackles
.
Part No: RF6310
|
|
|
|
Home -> Sailboat -> Blocks->Ultimate Ratchet Blocks
"Releases the line more smoothly than the little Harken ratchet used on most Lasers. Great combination with the Rooster Laser mainsheets that everyone is using. " Exceptional holding power in a super lightweight block Designed to deliver maximum holding power with minimum weight. Versatile on/off ratchet switch can be fitted to either side of the sheave for port/starboard applications. Switch can be operated under load. Black anodized, 5mm shackle and 3-way head-post design.
Part No: RF72100L
|
|
|
|
They are available in bolt through or bolt/screw-down styles and some are supplied with mounting pads to protect decks and facilitate sealing.
Part No: RF529
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Series 30 Ball-Bearing Mini Blocks
.
Part No: RF30332
|
|
|