Top Sellers
Slimline 500Gph Pump Kit from RULE INDUSTRIES
Portable pump goes where the water is and gets rid of it fastThese hand-deployed, submersible pumps are perfect for pumping out hard-to-reach places where water collects. No slouch when it comes to capacity, they are capable of pumping 500gph and generating a 13-foot head. Powered by your boat's 12V system, they work great for diesel or water transfer, deck showers, washdowns, and baitwell tank aeration. Purchased alone, pumps include a 13-foot power cable with battery clips.
|
Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).
|
500gph 12V Bilge Pump, 3/4" Port, 1.9A Draw, 2.5A Fuse, 3-1/2"H x 2-3/8"W from RULE INDUSTRIES
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
|
3-Way Lighted Rocker Panel Switch from RULE INDUSTRIES
Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with the Rule "fail-safe" spring return to "off" from the "manual" position.
|
110V AC Automatic Bilge Pump from RULE INDUSTRIES
The 1800gph pumping capacity and extra-long 24' power cord make this pump great for boats with shore power or protecting basements from flooding during wet weather. Motor and durable housing will last for years on the boat or in the home. 5/8" garden hose adapter. gph: 1800. Draw: 1. 1A@110V AC. Built-In Switch: Yes. Material: Plastic. Dimensions: 7-3/4" x 4-3/4". Port Size: 1-1/8".
|
Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Mount on doors, bulkheads, in the cockpit and on hatch boards. Helps to eliminate mildew. . Pre-drilled for six #8 screws. . Mfr. 's lifetime limited warranty. . Ship 0. 5 lbs.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
BK-1 Replacement BilgeKleen Filter from CENTEK INDUSTRIES
We recommend that filters be checked or changed every 3 months.
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
3/8" NPT Aluminum hose barb from MOELLER
3/8 NPT X 3/8" Aluminum hose barb with male threads.
|
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
|
Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
|
8" from RULE INDUSTRIES, 8 from RULE INDUSTRIES, 8"W from RULE INDUSTRIES
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Submersible Electric Bilge Pumps
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
Part No: 26D
|
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Submersible Electric Bilge Pumps
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
Part No: 20R
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Switches->Super Switch
Now features a mercury-free design The latest generation of Super Switch features a larger float for more buoyancy and less on/off cycling, top-led wiring with moisture-tight seal and grommet for strain relief, removable, "snap-in" base for easy switch installation or cleaning—all in an environmentally friendly, mercury-free design. Activation Method: Mechanical AgSnO2 contacts. Dimensions: 2-5/8"H x 2-1/8"W x 5"L. Capacity: 20A @ 12/24/32V DC.
Part No: 37FA
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Hose Adapters
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
Part No: 69
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools->Saturn® Compasses
The Danforth Saturn is a dual reading 3 3/4" card and is fully gimballed. The red-and-white card is easy to see. The Saturn Compass features a patented GLOBALBalance™ card for no-spin performance and perfect balance anywhere in the world. Recessed magnetic compensators are adjustable to compensate for metal structures on the boat. Adjustable hood shades compass from sun. Clinometer tells you heel angle up to 30 degrees in either direction and helps you fine-tune for sail efficiency.
Part No: A142
|
|
|
|
Home -> Fishing -> Fishing Accessories->Rule Livewell/Baitwell Pumps
Convenient, flexible pumps for baitwells and livewellsInnovative pump design includes new features like a quick one hand push-button motor cartridge removal system, rotatable base that allows you to position the discharge nozzle at any location, and threaded nylon hose barb attachments, which allow for various hose mounting options. Also included is a built-in dual port option, water-cooled housing and a positive snap motor cartridge locking mechanism.
Part No: 403C
|
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Submersible Electric Bilge Pumps
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
Part No: 20F
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Rule-Mate Fully Automatic Bilge Pumps
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.
Part No: RM2000-24
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Automatic 12V Bilge Pumps
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.
Part No: 25S
|
|
|
|
Home -> Navigation -> Compasses & Navigation Tools -> Surface Mount Compasses->Skipper Compasses
Skipper™ II Compass This compass features patented GLOBAL Balance cards™ for no-spin performance and perfect balance anywhere in the world. The 2 5/8"dia. Large, illuminated acrylic dome has a highly visible bright yellow lubberline, an expansion diaphragm to prevent bubbles and leaks, crossbar compensation and night illumination (12V DC). Apparent Card Dia. Card Type: Front read . Case Material: High temperature ABS . Case Dimensions: 4 7/8"H x 3 5/8"dia.
Part No: A80B
|
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Super Switch
Now features a mercury-free design The latest generation of Super Switch features a larger float for more buoyancy and less on/off cycling, top-led wiring with moisture-tight seal and grommet for strain relief, removable, "snap-in" base for easy switch installation or cleaning—all in an environmentally friendly, mercury-free design. Activation Method: Mechanical AgSnO2 contacts. Dimensions: 2-5/8"H x 2-1/8"W x 5"L. Capacity: 20A @ 12/24/32V DC.
Part No: 37A
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Rule Livewell/Baitwell Pumps
Convenient, flexible pumps for baitwells and livewellsInnovative pump design includes new features like a quick one hand push-button motor cartridge removal system, rotatable base that allows you to position the discharge nozzle at any location, and threaded nylon hose barb attachments, which allow for various hose mounting options. Also included is a built-in dual port option, water-cooled housing and a positive snap motor cartridge locking mechanism.
Part No: 45DR
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Rule Livewell/Baitwell Pumps
Convenient, flexible pumps for baitwells and livewellsInnovative pump design includes new features like a quick one hand push-button motor cartridge removal system, rotatable base that allows you to position the discharge nozzle at any location, and threaded nylon hose barb attachments, which allow for various hose mounting options. Also included is a built-in dual port option, water-cooled housing and a positive snap motor cartridge locking mechanism.
Part No: 401C
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Rule Livewell/Baitwell Pumps
Convenient, flexible pumps for baitwells and livewellsInnovative pump design includes new features like a quick one hand push-button motor cartridge removal system, rotatable base that allows you to position the discharge nozzle at any location, and threaded nylon hose barb attachments, which allow for various hose mounting options. Also included is a built-in dual port option, water-cooled housing and a positive snap motor cartridge locking mechanism.
Part No: 46DR
|
|
|
|
Home -> Plumbing -> Bilge Pumps
Is the float switch working? It's easy to check! Features a Rule-A-Matic float switch and an impact-resistant cover to protect against debris and jamming. Wiring is "blocked" by a rubber grommet to provide strain relief. Includes a convenient feature for manual tests. Activation Method: Float with mechanical contacts. Dimensions: 2-3/4"H x 2-1/2"W x 4-7/8"L. Capacity: 20A @ 12/24/32V DC.
Part No: 40A
|
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Submersible Electric Bilge Pumps
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
Part No: 16A
|
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Submersible Electric Bilge Pumps
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
Part No: 02
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Bait Tanks And Pumps->Gentle-Flow™ Oxygenator
Patented technology keeps your bait and catch alive and healthyDesigned with patented infuser technology and a Gentle-Flow directional discharge, the Rule Gentle-Flow Oxygenator is the ideal system for keeping bait and catch alive and healthy. Because the bubbles are so small, they remain suspended in the water longer providing more aeration to your delicate bait and catch. Designed to fit almost any custom tank, includes a pump, directional discharge, intake strainer, hose and intake valve. P.
Part No: 255
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Hose Adapters
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
Part No: 67
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Transom Mount Bait Pumps
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).
Part No: 20RTB
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Parts->Replacement Strainer Bases for Rule Bilge Pumps
Original replacement strainer base for your Rule Bilge Pump.
Part No: 279
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Plastic Mushroom Heads, Barbed, 90-degree
Not for use below the waterline.
Part No: 61
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Switches
Similar to the Lighted Panel Switch but without indicator light or fuse holder. The "manual" position has a "fail-safe" spring return to "off" so you can't leave your pump running by accident.
Part No: 45
|
|
|
|
Home -> Plumbing -> General Purpose Pumps
Designed for use as a washdown pump and/or livewell tank pump, this 12V pump delivers water at 7–10psi. Advanced safety features include anti-airlock and ignition protection. Heavy-duty construction, with double-insulated motor. Can run dry without damage. Must be mounted below the waterline. Application: Washdown, livewell circulation, general non-self-priming uses. gpm: 63 (3800 GPH). Port Sizes: 1-1/2" barb inlet and outlet. Dimensions: 5-1/4"H x 8-1/2"W.
Part No: 17A
|
|
|
|
Home -> Plumbing -> Fittings & Valves
Extra protection for your pump Extra measure of protection for cylindrical Rule pumps to 3700gph.
Part No: 70
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Switches
Keep switches from sticking and permit attachment to bulkhead Rule-A-Matic and SuperSwitch Guards keep switches from sticking on debris. Switch Adapter attaches Rule-A-Matic and Rule Super Switches to Rule 02 (1500gph) and Rule 10 (2000gph) pumps.
Part No: 65
|
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Parts->Replacement Strainer Bases for Rule Bilge Pumps
Original replacement strainer base for your Rule Bilge Pump.
Part No: 275
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Switches
Controls any pump equipped with an automatic float switch. Toggle has three positions (automatic, off, or manual) and has a "fail safe" spring return to "off" from the "manual" position. Panel is black stainless steel and has red indicator light and fuse holder.
Part No: 41
|
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Replacement Strainer Bases for Rule Bilge Pumps
Original replacement strainer base for your Rule Bilge Pump.
Part No: 278
|
|
|
|
|
Home -> Fishing -> Fishing Accessories->Gentle-Flow™ Oxygenator
Patented technology keeps your bait and catch alive and healthyDesigned with patented infuser technology and a Gentle-Flow directional discharge, the Rule Gentle-Flow Oxygenator is the ideal system for keeping bait and catch alive and healthy. Because the bubbles are so small, they remain suspended in the water longer providing more aeration to your delicate bait and catch. Designed to fit almost any custom tank, includes a pump, directional discharge, intake strainer, hose and intake valve. P.
Part No: 256
|
|
|
