Top Sellers
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.
|
P-Trap Fuel Surge Protector from ATTWOOD
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
|
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
WL/1 Fairlead Model from SPINLOCK
New low-profile design easily mounts to 1" stanchion using internal clamping system. WL/2 sheave model utilizes unique tracker ball angle adjustment. WL/1 Fairlead model includes stainless-steel bullseye for strength.
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
|
|
|
1, 1-1, from SCHAEFER, 4" from SCHAEFER, 1" x 1, SWL from SCHAEFER
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Medium-Duty Pintles
Typical installations use one with a short pin and one with a long pin. Pin diameter: 1/2". All require #10 RHMS.
Part No: 80-46
|
|
|
|
Home -> Sailboat -> Rigging Products->Stanchions
Heavy-duty 1'' stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16'' diameter. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16'' welded rod reinforcement doubles as a bail for snatch blocks, etc. . The gate brace mounts midway up the stanchion and has a welded base canted 60° to offer additional support at gate openings.
Part No: 36-07
|
|
|
|
Home -> Sailboat -> Blocks->Clear-Step Furling Blocks
This block leads the furling line outside your stanchions to keep furling lines out of the way. Slips over stanchions and secures by a simple set screw.
Part No: 706-44
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Jiffy Reefing Slides with Block and Bail
For boats to 35'. Adjustable jiffy reefing slider with welded bail rides on boom-mounted track to provide proper dead-end attachment point location fore and aft. The block leads the line forward along the boom to a spar-mounted jam cleat.
Part No: 73-45
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->5 Series Ball-Bearing Blocks
Like the 5 Series blocks, but with Schaefer’s ball bearing sheave. Curved ball races allow Schaefer ball bearing blocks to take higher loads than other similarly sized blocks. Sheave: UV-protected white Delrin¨. Ball Bearings: Delrin. Sheave Size: 2" (51mm). Line Dia. : 7/16" max. . Cheek Material/Finish: Black anodized aluminum or polished stainless cheeks, stainless straps.
Part No: 506-31
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Fastpins
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
Part No: 98-2505
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stamped “D” Shackles
Stamped from type 304 Stainless Steel, these lightweight shackles are provided with a stainless clevis pin and cotter ring. Approx. ShWt 0.
Part No: 93-21
|
|
|
|
Home -> Sailboat -> Blocks->Series 02 Blocks
Small utility blocks to use for control line applications on small dinghies and one-designs. Single blocks are constructed of polished and tumbled stainless steel. The Delrin<V>® sheaves turn on stainless steel spacers which keep cheeks from squeezing and binding the sheave. Sheave: Delrin. Sheave Size: 1-1/16" (27mm). Line Diameter: Up to 5/16". Cheek Material/Finish: Stainless steel. Shackle/Strap Type: Stainless clevis/cotter.
Part No: 02-50
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-62
|
|
|
|
Home -> Sailboat -> Blocks
High-load, high-strength block has a Universal Circuit (UC) sheave system with multiple friction-reducing bearing components, so the block has considerably less friction than conventional roller blocks, and actually becomes more efficient as you use it. The stainless head swivels or is fixed with a three-way locking fixture. Configuration: Single swivel block. Sheave: Aluminum UC for wire or line. Ball Bearings: Nomex Teflon high-impact glass-fiber. Max. Line Diameter: 5/8" (16mm).
Part No: 10-05-UC
|
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Stanchions
Heavy-duty 1'' stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16'' diameter. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16'' welded rod reinforcement doubles as a bail for snatch blocks, etc. . The gate brace mounts midway up the stanchion and has a welded base canted 60° to offer additional support at gate openings.
Part No: 36-08
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Main Reefing & Furling->Jiffy Reefing Slides with Block and Bail
For boats to 35'. Adjustable jiffy reefing slider with welded bail rides on boom-mounted track to provide proper dead-end attachment point location fore and aft. The block leads the line forward along the boom to a spar-mounted jam cleat.
Part No: 73-37
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Tangs
High-quality stainless steel tumbled and polished.
Part No: 85-20
|
|
|
|
Home -> Sailboat -> Blocks -> Fairlead Blocks->300 Series Fairlead Blocks
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
Part No: 300-31
|
|
|
|
Home -> Sailboat -> Blocks->Over-the-Top Fairlead Blocks
Designed for bringing control lines over the forward edge of cabin houses, coamings or rails. Ball bearing sheaves provide low friction support for lines that need to be bridged or lifted for a clean lead. Open race ball bearings allow salt, dirt and debris to be easily flushed out. Single blocks. Maximum line dia: 1/2". Use #10 fasteners. Configuration: Over-the-top lead block. Ball Bearings: Delrin® . Sheave: 7/16" . Line Dia: 7/16" .
Part No: 300-40
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Stainless-Steel Genoa Slides
Die-formed stainless steel, tumbled and polished. Spring pin stop. Includes polyethylene liners .
Part No: 72-49
|
|
|
|
|
Home -> Sailboat -> Blocks->5 Series Ball-Bearing Blocks
Like the 5 Series blocks, but with Schaefer’s ball bearing sheave. Curved ball races allow Schaefer ball bearing blocks to take higher loads than other similarly sized blocks. Sheave: UV-protected white Delrin¨. Ball Bearings: Delrin. Sheave Size: 2" (51mm). Line Dia. : 7/16" max. . Cheek Material/Finish: Black anodized aluminum or polished stainless cheeks, stainless straps.
Part No: 506-05
|
|
|
|
|
Home -> Sailboat -> Blocks->5 Series Ball-Bearing Blocks
Like the 5 Series blocks, but with Schaefer’s ball bearing sheave. Curved ball races allow Schaefer ball bearing blocks to take higher loads than other similarly sized blocks. Sheave: UV-protected white Delrin¨. Ball Bearings: Delrin. Sheave Size: 2" (51mm). Line Dia. : 7/16" max. . Cheek Material/Finish: Black anodized aluminum or polished stainless cheeks, stainless straps.
Part No: 506-32
|
|
![5 Series Block, Single with Becket, Stainless Cheeks, 8.3oz. from SCHAEFER]( "5 Series Block, Single with Becket, Stainless Cheeks, 8.3oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 505-15
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-03
|
|
|
|
Home -> Cordage -> Rigging Products->Vinyl Batten Tips
Soft vinyl tips to slip over batten ends to permit smooth insertion - no snags.
Part No: TIP050 PK
|
|
|
|
Home -> Engine Systems -> Control Systems->Shift Knobs
These handsome gold knobs not only look great, they're practical too! Offered in smooth and ridged styles.
Part No: MF-11-G
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Jib Furling Systems
Using a combination of smooth-rolling Torlon® bearings and a round headstay extrusion centered on the headstay, Schaefer has reduced the effort necessary to roll up a genoa relative to competitive furlers. increases mechanical advantage making furling easier. Open cage design for easy inspection and maintenance. Polyethylene bearing liners stop corrosion and promote smooth furling. Use Norseman or Sta-Lok fittings for easy installation over your existing standard wire headstay and turnbuckle.
Part No: 1100-WL
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Dinghy/Gudgeon Pintles
These pintles are built around 5/16" diameter pins.
Part No: 80-12
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Tangs
High-quality stainless steel tumbled and polished.
Part No: 85-18
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Halyard Exit Plates
Lessens halyard chafe without the expense of a sheave box.
Part No: 34-48
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->End Stops for T-Track
Protect your feet with these plastic tapered stops.
Part No: 74-36
|
|
|
|
Home -> Sailboat -> Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 303-86
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->Fairleads for Fast-Entry Cam Cleats
Nylon fairleads for fast-entry cam cleats.
Part No: 77-17-RED
|
|
|
|
Home -> Sailboat -> Blocks->Series 300 Ball-Bearing Blocks
Strong smooth-running blocks feature stainless or aluminum cheeks, stainless steel heads and straps, and Delrin® sheaves. Pulpit Furling Lead and Clamp-On Furling Block fit 1" tubing for mounting to stanchions. Ideal for furling line applications on most boats. Singles and Cheeks are ideal for control lines and halyards. Sheave: Delrin. Sheave Size: 1-7/16". Ball Bearings: 3. Cheek Material/Finish: Aluminum or stainless. Shackle Strap Type: Swivel or lashing eye.
Part No: 300-05
|
|
|
