Top Sellers
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
|
|
Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
|
1"W x 8"L Tang from SCHAEFER
High-quality stainless steel tumbled and polished.
|
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
PAR-Max 4 Water-System Pump, 12V from JABSCO
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Outboard Oil - SAE 10W-40 from WEST MARINE
With a higher number of performance-boosting additives than automotive oil, this synthetic blend meets and exceeds the needs of high-performance outboards. It's special formula protects outboards from friction damage and engine wear. Outstanding viscosity at low temperatures. Greater detergency. Resists engine build up. Exceeds all 4-stroke outboard requirements.
|
Synthetic Blend 4-Cycle Engine Oil, Quart from QUICKSILVER
Recommended for gasoline and diesel-powered stern-drive and inboard engines that require FC-W Certified, SAE 25W-40 oil.
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
Flush Kit For 2- & 4-Stroke Outboards from MERCURY MARINE
Fits Mercury/Mariner 4 and 5hp 2-stroke outboards and 4, 5 and 6hp 4-stroke outboards.
|
|
from SCHAEFER, Pk from SCHAEFER, SWL from SCHAEFER, 4"H from SCHAEFER
|
|
Home -> Cordage -> Rigging Products->Vinyl Batten Tips
Soft vinyl tips to slip over batten ends to permit smooth insertion - no snags.
Part No: TIP125 PK
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
.
Part No: 704-15
|
|
|
|
Home -> Sailboat -> Blocks->Replacement Sheaves for Schaefer Blocks
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
Part No: 62-053-B
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals->Stanchion Base & Brace
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
Part No: 36-09
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Sail Track Stops
Stainless-steel end stops protect your sails.
Part No: 74-45
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
Great for snatch blocks, snap shackles, zippers, quick pins, etc.
Part No: 99-23
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr
Rudder is removed by depressing end of stop 1/2" x 4" .
Part No: 82-01
|
|
|
|
Reliable jib furling for dinghies and trailerable boats is now available in convenient packages, which include the upper swivel, lower drum, and furling line. These systems allow you to furl from the safety of the cockpit, but are not for reefing. All components feature high-strength Torlon bearings riding on precision-machined races designed to maximize bearing contact area and minimize friction. The included furling line is properly sized to handle the loads.
Part No: 550-00
|
|
|
|
Home -> Cordage -> Rigging Products->Link Tangs
High-quality stainless. Used with marine eyes or toggles to permit shroud adjustment.
Part No: 84-95
|
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
.
Part No: 705-45
|
|
![5 Series Block, Fiddle/Adjustable Cam/Becket, Aluminum Cheeks, 13.6oz. from SCHAEFER]( "5 Series Block, Fiddle/Adjustable Cam/Becket, Aluminum Cheeks, 13.6oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 504-76
|
|
|
|
Home -> Sailboat -> Blocks->Deck Organizers
Run multiple halyards and control lines aft from the mast to stoppers or winches for quick easy adjustment. Low-profile, high-strength organizers maximize deck space and let you operate control lines from the safety of the cockpit. Stainless steel top plate. Delrin sheaves: 51mm (2") diameter. SWL: 1950lbs. Max line diameter: 1/2" .
Part No: 505-80
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Standard Toggles/Links
Features include: Anodized aluminum and polished stainless steel provide strength, durability . increases mechanical advantage making furling easier . Open cage design for easy inspection and maintenance . * Not on System 750 A complete system consists of a furler drum and tube package and a matching toggle and link, either standard or long (sold separately). Systems without mechanical fittings are designed for rod or pre-swaged wire headstays; we recommend assembly by a professional rigger.
Part No: 46-030-01
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-96
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Sail Track
Type 304 stainless steel. Hole spacing: 2-3/4" on center.
Part No: 75-07-144 inch
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 689
|
|
|
|
|
Home -> Sailboat -> Blocks->Deck Organizers
Run multiple halyards and control lines aft from the mast to stoppers or winches for quick easy adjustment. Low-profile, high-strength organizers maximize deck space and let you operate control lines from the safety of the cockpit. Stainless steel top plate. Delrin sheaves: 51mm (2") diameter. SWL: 1950lbs. Max line diameter: 1/2" .
Part No: 504-80
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Sail Track Stops
Stainless-steel end stops protect your sails.
Part No: 74-42
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-78
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-64
|
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
.
Part No: 705-75
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Fastpins
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
Part No: 98-3110
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Fastpins
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
Part No: 98-3115
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Fastpins
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
Part No: 98-3120
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Fastpins
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
Part No: 98-3715
|
|
![4" Standard Open-Base Cleat, 3/8" Max. Line Dia., two #10 FHMS, 3/4"H from SCHAEFER]( "4\" Standard Open-Base Cleat, 3/8\" Max. Line Dia., two #10 FHMS, 3/4\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-94
|
|
|
|
Home -> Sailboat -> Blocks->Series 303 Aluminum Blocks
Use as sheet control blocks on dinghies, or for control lines on larger boats. High-impact Delrin® sheaves turn on polished stainless steel spacers, so the cheeks won't squeeze or bind the sheave, even under extremely heavy loads. Head shackles are stamped stainless steel with clevis pin and cotter ring. Cheeks are black hard-coated anodized aluminum. Straps, headclips, shackles, and rivets are tumbled and polished stainless steel. Sheave: Delrin. Cheek Material/Finish: Aluminum.
Part No: 303-03
|
|
|
|
|
Home -> Cordage -> Rigging Products->Vinyl Batten Tips
Soft vinyl tips to slip over batten ends to permit smooth insertion - no snags.
Part No: TIP075 PK
|
|
|
|
Home -> Sailboat -> Blocks -> Fairlead Blocks->Spring-Loaded Blocks on Slides
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
Part No: 08-92
|
|
![5 Series Block, Fiddle, Stainless Cheeks, 11.3oz. from SCHAEFER]( "5 Series Block, Fiddle, Stainless Cheeks, 11.3oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 505-45
|
|
|
