Top Sellers
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
|
Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
|
Capstan 1000 Rope Winch from POWERWINCH
Versatile system uses an easy to operate foot switch to retrieve anchors or fishing pots or provide power assistance on limited crew sailboats. Solid, 1-piece, machined capstan features aluminum housing with stainless steel internal shafts and hardware. Deck mounted design saves space for rope locker. Mounting template included. Pulling Power: 1000lbs. Speed Up: 40'/min. Boat size: to 55' . Rope Type: 3-strand nylon. Draw: 27A @12v. Measure 6 5/16"H x 8"W x 10 9/16"L.
|
|
1, 1-1, from SCHAEFER, 1-3, 1-5, 16'' x 1-1, 2" from SCHAEFER, 1-7, 7-1, Fits 1" x 1
|
|
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->Sure-Grip Cam Cleats
Investment cast stainless jaws with flared tops allow lines to drop in without pulling. Hole spacing matches previous Schaefer cleats. Wire fairleads can be removed.
Part No: 70-38
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr
Use two in conjunction with one heavy-duty rudder gudgeon. Hole dia. : 1/2". Base dimensions: 1" x 4 1/4".
Part No: 81-46
|
|
![6" Standard Open-Base Cleat, 5/8" Max. Line Dia., two 1/4" FHMS, 1-1/8"H from SCHAEFER]( "6\" Standard Open-Base Cleat, 5/8\" Max. Line Dia., two 1/4\" FHMS, 1-1/8\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-96
|
|
|
|
Home -> Sailboat -> Blocks->Twin-Sheet Lead Blocks
Computer-machined genoa cars offer a strong yet lightweight lead. Sheaves are wide enough for two sheets simultaneously. Tilts 45° in either direction. Aluminum cheeks, sheave and sliders. Configuration: Twin sheet lead block. Sheave: Delrin® . Ball Bearings: Nomex Teflon® epoxy-saturated . Cheek Material/Finish: Anodized aluminum, black or silver finish.
Part No: 32-88
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Light-Duty Block Hangers
Forged stainless-steel construction.
Part No: 90-07
|
|
|
|
Home -> Sailboat -> Blocks->200 Series Fairhead Blocks
Extremely low profile, fixed fairlead block keeps control lines and halyards close to the deck. The hinged version is for mounting on spars or on deck. It adjusts to variable halyard and control line angles to provide a proper lead, and its narrow base plate allows multiple mounts. Both have open race ball bearings to allow salt, dirt and debris to be easily flushed out. Sheave: UV-stabilized white Delrin®. Sheave Size: 1-1/16" (27mm). Cheek Material/Finish: Polished stainless.
Part No: 200-31
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-76-C
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Medium-Duty Pintles
Typical installations use one with a short pin and one with a long pin. Pin diameter: 1/2". All require #10 RHMS.
Part No: 80-45
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Medium-Duty Pintles
Typical installations use one with a short pin and one with a long pin. Pin diameter: 1/2". All require #10 RHMS.
Part No: 80-56
|
|
|
|
Home -> Sailboat -> Blocks->Replacement Sheaves for Schaefer Blocks
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
Part No: 62-030-02
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Tangs
High-quality stainless steel tumbled and polished.
Part No: 85-26
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-65
|
|
![5" Jam Cleat Open-Base Cleat, 3/8" Max. Line Dia., two #12 FHMS, 13/16"H from SCHAEFER]( "5\" Jam Cleat Open-Base Cleat, 3/8\" Max. Line Dia., two #12 FHMS, 13/16\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-79
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-02
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-05
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Light-Duty Block Hangers
Forged stainless-steel construction.
Part No: 90-04
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stamped “D” Shackles
Stamped from type 304 Stainless Steel, these lightweight shackles are provided with a stainless clevis pin and cotter ring. Approx. ShWt 0.
Part No: 93-31
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-62-C
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
5/8 SWIVEL BLK ON DECK PLATE.
Part No: 704-62
|
|
|
|
|
Home -> Sailboat -> Blocks->Replacement Sheaves for Schaefer Blocks
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
Part No: 62-019
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 97-53
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Tangs
High-quality stainless steel tumbled and polished.
Part No: 85-24
|
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
.
Part No: 34-35
|
|
|
|
Home -> Sailboat -> Blocks->5 & 7 Series Snap Shackle Adapters
Universal adapter for custom mounting all Series 5 and 7 blocks. Quick release.
Part No: 504-01
|
|
![2" Over-the-Top Fairlead Block, 2-7/8"x 2-1/16", 1,000lb. SWL from RONSTAN]( "2\" Over-the-Top Fairlead Block, 2-7/8\"x 2-1/16\", 1,000lb. SWL from RONSTAN")
|
|
Home -> Sailboat -> Blocks->Over-the-Top Fairlead Blocks
Schaefer's Over the Top Blocks are designed for bringing control lines over the forward edge of cabin houses, coamings or rails. Ball Bearing sheaves provide low friction support for lines that need to be bridged or lifted for a clean lead. Max. line diameter: 1/2". Single ball bearing sheave. Sheave diameter, 300-40: 1-7/16" (37mm). Sheave diameter, 506-40: 2" (50mm). SWL (300-40): 650lb. SWL (506-40): 1000lb.
Part No: 506-40
|
|
|
|
Home -> Sailboat -> Tiller & Rudder
Plate dimensions: 3-1/2" x 7/8" Hole dia: 1/2" Requires two 1/4" FHMS .
Part No: 81-41
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Fastpins
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
Part No: 98-1815
|
|
![6" Four-Hole Open-Base Cleat, 7/16" Max. Line Dia., four 1/4" FHMS, 1-1/4"H from SCHAEFER]( "6\" Four-Hole Open-Base Cleat, 7/16\" Max. Line Dia., four 1/4\" FHMS, 1-1/4\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-06
|
|
![8" Four-Hole Open-Base Cleat, 3/4" Max. Line Dia., four 5/16" FHMS, 1-1/2"H from SCHAEFER]( "8\" Four-Hole Open-Base Cleat, 3/4\" Max. Line Dia., four 5/16\" FHMS, 1-1/2\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-08
|
|
![6" Standard Closed-Base Cleat, 5/8" Max. Line Dia., two 1/4" FHMS, 3/4"H from SCHAEFER]( "6\" Standard Closed-Base Cleat, 5/8\" Max. Line Dia., two 1/4\" FHMS, 3/4\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-16
|
|
|
