Top Sellers
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Green Lacquer Thinner, Gal from KLEAN STRIP
Klean Strip Green Laquer Thinner; a substitute for regular lacquer thinner Thins lacquer and epoxy . Cleans tools and equipment after lacquer and painting projects . Better for the environment . Made with 20% renewable content . Contains no petroleum distillates . Biodegradable .
|
Simple Green Marine - 20 oz
Here's a dependable cleaner/degreaser for your boatEasy to use just spray and wipe for spot cleanups. Cleans grease, oil, dirt and stains. Safe for fiberglass, painted surfaces and vinyl. 20oz.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
|
Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
|
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
WL/1 Fairlead Model from SPINLOCK
New low-profile design easily mounts to 1" stanchion using internal clamping system. WL/2 sheave model utilizes unique tracker ball angle adjustment. WL/1 Fairlead model includes stainless-steel bullseye for strength.
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
|
from SCHAEFER, 1, 1-1, SWL from SCHAEFER, Green from SCHAEFER
|
|
Home -> Sailboat -> Blocks->Deck Organizers
Run multiple halyards and control lines aft from the mast to stoppers or winches for quick easy adjustment. Low-profile, high-strength organizers maximize deck space and let you operate control lines from the safety of the cockpit. Stainless steel top plate. Delrin sheaves: 51mm (2") diameter. SWL: 1950lbs. Max line diameter: 1/2" .
Part No: 504-81
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Snatch blocks are one of the most versatile tools available for racing or cruising. The flexibility of these blocks makes them ideal for use as Genoa leads, spinnaker controls, or short sheet leads for jibs. Investment cast snap shackle head attaches to the block with a ball joint swivel. The key feature however, is that the block cage can be opened allowing a line to be inserted at any point, rather than being reeved (run through the end) as with conventional blocs.
Part No: 05-99
|
|
|
|
Home -> Sailboat -> Blocks->M-Series Blocks
Computer-machined aluminum construction maintains sideplate strength while minimizing weight, giving these blocks an incredible strength-to-weight ratio and a distinctive, clean look. Torlon™ rollers and Delrin™ ball bearings in the sheave handle high loads with low friction. An excellent alternative for sailors interested in a lightweight choice. Sheave: Aluminum. Ball Bearings: Delrin.
Part No: M66-31
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-72-C
|
|
|
|
Home -> Sailboat -> Rigging Products->Stanchions
Heavy-duty 1'' stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16'' diameter. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16'' welded rod reinforcement doubles as a bail for snatch blocks, etc. . The gate brace mounts midway up the stanchion and has a welded base canted 60° to offer additional support at gate openings.
Part No: 36-18
|
|
|
|
|
Home -> Cordage -> Rigging Products->Stanchion Base & Brace
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
Part No: 36-01
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Dinghy/Gudgeon Pintles
These pintles are built around 5/16" diameter pins.
Part No: 80-11
|
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Dinghy/Gudgeon Pintles
These pintles are built around 5/16" diameter pins.
Part No: 80-02
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Tangs
High-quality stainless steel tumbled and polished.
Part No: 85-13
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-68
|
|
![5 Series Block, Double, Aluminum Cheeks, 8.3oz. from SCHAEFER]( "5 Series Block, Double, Aluminum Cheeks, 8.3oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 504-25
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Medium-Duty Pintles
Typical installations use one with a short pin and one with a long pin. Pin diameter: 1/2". All require #10 RHMS.
Part No: 80-55
|
|
![5 Series Block, Cheek, Flat Base, Stainless, 6.9oz. from SCHAEFER]( "5 Series Block, Cheek, Flat Base, Stainless, 6.9oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 505-11
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stainless-Steel Chain Plates
1" and 1-1/4" sizes are flat with four fastener holes. 1 1/2" size is formed (bent) with five fastener holes. Type 304 stainless-steel.
Part No: 84-87
|
|
![5 Series Block, Single with Becket, Aluminum Cheeks, 5.7oz. from SCHAEFER]( "5 Series Block, Single with Becket, Aluminum Cheeks, 5.7oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 504-15
|
|
|
|
Home -> Sailboat -> Rigging Products->Triangle Plates
Create your own adjustment system on any split backstay rig. Plates are Type 304 stainless steel, and come in pairs with three clevis and cotter pins.
Part No: 84-44
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Jib Furling Systems
Using a combination of smooth-rolling Torlon® bearings and a round headstay extrusion centered on the headstay, Schaefer has reduced the effort necessary to roll up a genoa relative to competitive furlers. increases mechanical advantage making furling easier. Open cage design for easy inspection and maintenance. Polyethylene bearing liners stop corrosion and promote smooth furling. Use Norseman or Sta-Lok fittings for easy installation over your existing standard wire headstay and turnbuckle.
Part No: 2100-WL
|
|
|
|
Home -> Sailboat -> Blocks->5 & 7 Series Snap Shackle Adapters
Universal adapter for custom mounting all Series 5 and 7 blocks. Quick release.
Part No: 704-01
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Long Integral Toggles/Links
Replaces Schaefer standard, integral toggle link to raise bottom drum assembly off deck to clear anchor windlasses, bow rollers or anchors.
Part No: 2100-22
|
|
![5 Series Block, Stand-Up (Requires four #10 RHMS), Aluminum Cheeks, 6.5oz. from SCHAEFER]( "5 Series Block, Stand-Up (Requires four #10 RHMS), Aluminum Cheeks, 6.5oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 504-62
|
|
|
|
Home -> Sailboat -> Blocks -> Fairlead Blocks->Twin-Sheet Lead Blocks
Computer-machined genoa cars offer a strong yet lightweight lead. Sheaves are wide enough for two sheets simultaneously. Tilts 45° in either direction. Aluminum cheeks, sheave and sliders. Configuration: Twin sheet lead block. Sheave: Delrin® . Ball Bearings: Nomex Teflon® epoxy-saturated . Cheek Material/Finish: Anodized aluminum, black or silver finish.
Part No: 32-97
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Fastpins
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
Part No: 98-3710
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->Fairleads for Fast-Entry Cam Cleats
Nylon fairleads for fast-entry cam cleats.
Part No: 77-17-GRN
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails
Stanchion mount lined fairlead for furling line.
Part No: 78-53
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories
Stainless steel feeder for all systems. Aligns 35-#8 luff tape prior to entering the main feeder on the extrusion foil. Welded bail for shock cord or line to keep the feeder near the headstay. 5/16" dia.
Part No: 76-30
|
|
|
|
Home -> Sailboat -> Blocks->Replacement Sheaves for Schaefer Blocks
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
Part No: 62-018
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->Furling Blocks & Accessories
This block leads the furling line outside your stanchions to keep furling lines out of the way. Slips over stanchions and secures by a simple set screw. Low-friction ball-bearing races. Max. Line Dia.
Part No: 300-34
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Tangs
High-quality stainless steel tumbled and polished.
Part No: 85-30
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Heavy Duty Rudder Gudgeons
These gudgeons are built for 1/2" pins. Use with heavy-duty transom gudgeon (Model 252221) and gudgeon pin (Model 252239). Each requires 1/4" RHMS.
Part No: 81-47
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-85
|
|
|
