Top Sellers
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
Selma Splicing Fids Set from SAMSON ROPE
Stainless steel fids make burying line much easier. Work with 1/8"–7/16" single braids or 1/4"–9/16" double braids.
|
Pusher from SAMSON ROPE
Includes everything you need to make a smooth splice in double braid: tubular fids for 1/4", 5/16", 3/8", 7/16" and 1/2" line, a pusher and complete instructions. Fids and pusher are also sold separately.
|
CP Zinc Elbow Catch from PERKO
Chrome-plated zinc with stainless steel spring. . Measures: 1 1/8" x 9/16" . Requires #6 RH screws (Not included).
|
Mas Gelcoat Repair Kit, Multicolor from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
C-Strobe Personal Strobe Light from ACR ELECTRONICS
This waterproof, corrosion-resistant PFD light delivers more than eight hours of intense one-second interval flashes on two AA alkaline or 1. 5V lithium batteries (not included). Waterproof (to 10'), corrosion- impact- and temperature- resistant ABS case Twist "ON-OFF" control can be operated by gloved hands and in adverse conditions Slim, lightweight design. Comes with an adjustabe Velcro® strap and wrist loop Meets USCG (161. Flash rate: 60 ± 10 flashes per minute nominal.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
|
from SCHAEFER, 1, 1-1, Black from SCHAEFER, 16'' x 1'' from SCHAEFER
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Stainless-Steel Genoa Slides
Die-formed stainless steel, tumbled and polished. Spring pin stop. Includes polyethylene liners .
Part No: 17-59
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stamped Stainless Eyestraps
1-3/4"L x 5/16"W Eye Strap, 1/2" Fairlead Width, 1-5/16" Hole Centers, Two #10 RHMS Fasteners.
Part No: 78-32
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Tangs
High-quality stainless steel tumbled and polished.
Part No: 85-03
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Snapfurl Small Boat Furling/Reefing System
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
Part No: CF-500 **
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr
Includes 81-46 and 81-49 J/24 Assembly. High-strength stainless steel. Boat Size Up to 25' (7. 6 m), . Pin Dia. 1/2" (13 mm), . Pin Length 3-7/8" (98 mm), . Strap Thick. 1/8" (3 mm), . Strap Length 4-1/4" (108 mm), . Strap Width 1" (25 mm), .
Part No: 81-50
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->Fairleads for Fast-Entry Cam Cleats
Nylon fairleads for fast-entry cam cleats.
Part No: 77-17-BLK
|
|
|
|
Home -> Sailboat -> Blocks->Series 300 Ball-Bearing Blocks
Strong smooth-running blocks feature stainless or aluminum cheeks, stainless steel heads and straps, and Delrin® sheaves. Pulpit Furling Lead and Clamp-On Furling Block fit 1" tubing for mounting to stanchions. Ideal for furling line applications on most boats. Singles and Cheeks are ideal for control lines and halyards. Sheave: Delrin. Sheave Size: 1-7/16". Ball Bearings: 3. Cheek Material/Finish: Aluminum or stainless. Shackle Strap Type: Swivel or lashing eye.
Part No: 300-30
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
.
Part No: 704-11
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Tangs
High-quality stainless steel tumbled and polished.
Part No: 85-14
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Chain Plates
1" and 1-1/4" sizes are flat with four fastener holes. 1 1/2" size is formed (bent) with five fastener holes. Type 304 stainless-steel.
Part No: 84-88
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-74
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Tangs
High-quality stainless steel tumbled and polished.
Part No: 85-16
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories
Flared design adjusts the lead angle from the masthead to the upper swivel to prevent halyard wraps. Fits mast radius 2-1/4" to 3". Max. wire size: 5/8".
Part No: 78-75
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Toggles
For use with marine eyes. Allows standing rigging to align with the tension in the rig. Double jaw style has an extra-deep slot for use with split masthead sheave boxes or chainplates. Eye-jaw design has an extra-deep strap for end-to-end assembly with double jaw toggles or link tangs. Interior depth is measured from pin center. Pin diameters to 5/16'' are Type 304 stainless.
Part No: 93-88
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Midrail Cleats
Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1 1/4'' T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless. Strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position.
Part No: 70-75
|
|
|
|
Home -> Sailboat -> Blocks->Deck Organizers
Run multiple halyards and control lines aft from the mast to stoppers or winches for quick easy adjustment. Low-profile, high-strength organizers maximize deck space and let you operate control lines from the safety of the cockpit. Stainless steel top plate. Delrin sheaves: 51mm (2") diameter. SWL: 1950lbs. Max line diameter: 1/2" .
Part No: 505-81
|
|
![5" Standard Open-Base Cleat, 1/2" Max. Line Dia., two #12 FHMS, 1-5/16"H from SCHAEFER]( "5\" Standard Open-Base Cleat, 1/2\" Max. Line Dia., two #12 FHMS, 1-5/16\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-95
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Tangs
High-quality stainless steel tumbled and polished.
Part No: 85-02
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Light-Duty Block Hangers
Forged stainless-steel construction.
Part No: RF1046
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Light-Duty Block Hangers
Forged stainless-steel construction.
Part No: 90-10
|
|
|
|
Home -> Sailboat -> Blocks->Series 303 Aluminum Blocks
Use as sheet control blocks on dinghies, or for control lines on larger boats. High-impact Delrin® sheaves turn on polished stainless steel spacers, so the cheeks won't squeeze or bind the sheave, even under extremely heavy loads. Head shackles are stamped stainless steel with clevis pin and cotter ring. Cheeks are black hard-coated anodized aluminum. Straps, headclips, shackles, and rivets are tumbled and polished stainless steel. Sheave: Delrin. Cheek Material/Finish: Aluminum.
Part No: 303-09
|
|
|
|
Home -> Sailboat -> Tiller & Rudder
For heavy-duty gudgeon-to-gudgeon connection. Dimensions: 1/2"dia.
Part No: 81-49
|
|
![5 Series Block, Double with Becket, Aluminum Cheeks, 9.1oz. from SCHAEFER]( "5 Series Block, Double with Becket, Aluminum Cheeks, 9.1oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 504-35
|
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
.
Part No: 705-05
|
|
![5 Series Block, Single, Aluminum Cheeks, 5.0oz. from SCHAEFER]( "5 Series Block, Single, Aluminum Cheeks, 5.0oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 504-05
|
|
|
|
Home -> Sailboat -> Blocks -> Fairlead Blocks->Twin-Sheet Lead Blocks
Computer-machined genoa cars offer a strong yet lightweight lead. Sheaves are wide enough for two sheets simultaneously. Tilts 45° in either direction. Aluminum cheeks, sheave and sliders. Configuration: Twin sheet lead block. Sheave: Delrin® . Ball Bearings: Nomex Teflon® epoxy-saturated . Cheek Material/Finish: Anodized aluminum, black or silver finish.
Part No: 32-77
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stamped Halyard Shackles
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
Part No: 93-42
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Fastpins
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
Part No: 98-1810
|
|
|
|
|
Home -> Sailboat -> Rigging Products->Stainless-Steel Tangs
High-quality stainless steel tumbled and polished.
Part No: 85-25
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-72
|
|
|
