Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .

Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .

Striping Tape - Burgundy, 1" from SEAFIT
.

Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.

3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .

PAR-Max 4 Water-System Pump, 12V from JABSCO
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).

G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.

Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .

PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.

Anode Kit - 818298Q 1 from MERCURY MARINE
Mercury/MerCruiser Anodes and Anode Kit - VPN - - Description - - Fits - A 31640Q 4 Trim Tab Anode Fits most Mercury/Mariner outboards 35 hp. & above and all MerCruiser except Bravo. & above and all MerCruiser except Bravo. C 806189Q 1 Trim Cylinder Anode Fits Alpha One Gen II drives. D 806190Q 1 Trim Cylinder Anode Fits Bravo I, II, III, X, XR, XZ and Blackhawk drives. F 826134Q Side Pocket Anode Fits Mercury/Mariner 30-300hp outboards, Force 90 & 120hp 1995 and newer outboards.

Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .

Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.

Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".

Barbed Hose Reducer, 1-1/4" to 1-1/2" from MARINE EAST
.

Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.