|
|
Blue Sea Systems' new Rocker Circuit Breaker Distribution Panels offers a sleek, modern appearance that will complement the interior of almost any custom yacht, pleasure boat or commercial vessel. The rocker magnetic circuit breakers meet all North American and European CE Standards and are 12 and 24 volt capable.
Part No: 8371
|
|
|
|
Electrical->Low Amperage Distribution->Bus Bar
Negative and positive circuits on one block with a snap-on Lexan insulating cover. Two tin-plated copper bus bars with 5 #10-32 terminal screws & 2 large terminals on each bus DC rated for 150A@48V AC rated for 130A@300V Meets ABYC and USCG insulation requirements Circuits.
Part No: 2723
|
|
|
|
Electrical->Battery Switches & Cable->Switch
Rated the top standard-duty switch by Powerboat Reports Rated 350A continuous/600A Intermittent/700A Cranking/1750A Inrush with the new Engine Starting Standard. Tin-plated copper terminals are 3/8” for better conductivity. Luminous face plate, pointer and tactile indicators for safe operation in low light.
Part No: 9004E
|
|
|
|
Electrical->Meters & Distribution->PowerBar Bus - 600 Amp
The highest amperage bus connector available! 3/8" studs on a tin-plated copper bus rated for 600A@48V DC and 525A@300V AC. Designed for use as a main DC negative or positive bus on larger boats 3/8-16 Stud Size Dimension 4 stud: 7"L x 2 1/4"H Dimension 8 stud.
Part No: 2107
|
|
|
|
An easy and economical solution for satisfying ABYC 7" circuit protection rule. Mounts on 3/8" (M10) battery post, battery switch and busbar terminals. Appropriate for DC Main, inverter, windlass, and bow thruster circuit protection, providing high current protection in tight spaces.
Part No: 5190
|
|
|
|
Electrical->Meters & Distribution->Waterproof Fuse Panels
Designed for flybridge and open cockpit environments DC panel features Contura® switches with embedded “On” LED indicators. Accept AGC and MDL 1 1/4” x 1/4” glass fuses. Undercoated with Mil-C-5541C (or equivalent) that protects all surface detail from corrosion.
Part No: 8261
|
|
|
|
Electrical->Meters & Distribution->Digital Electrical Meter Series
Digital electrical meters feature an innovative shape that makes them easy to switch out and install. Large bright LED display features waterproof front with easy push button controls. Front mounts in a standard 2" round hole. Rear mounts in any full size electrical panel meter cut out.
Part No: 8235
|
|
|
|
Electrical->Meters & Distribution
Part No:
|
|
|
|
Mega Fuses Compact in-line fuses connect with 5/16" fasteners like those on the Mega Fuse Holder. Time to blow depends on the current flow as a percentage of the fuse rating. When exceeding 140% of the rating, it takes about 200 seconds. At 180%, 6 seconds.
Part No: 5103
|
|
|
|
Electrical->Meters & Distribution->Electrical Distribution Panels AC
Blue Sea Systems Panels reflect the quality and attention to detail that premier yacht designers and builders specify for the finest custom and production yachts, as well as commercial vessels worldwide. These panels are cut from heavy 1/8” 5052 aluminum alloy and undercoated with a MIL-C-5541C spec.
Part No: 8077
|
|
|
|
Useful as general indicators or as alarms, these lights easily install in any Blue Seas Systems' circuit breaker panel.
Part No: 8066
|
|
|
|
Electrical->Meters & Distribution->Dual Bus Blocks
For circuits which branch after the distribution panel, such as electronics and lighting. Combines negative and positive busses on one block.
Part No: 2701
|
|
|
|
6000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. Tin-plated connector blades resist corrosion Blown condition is visible Max.
Part No: 5129
|
|
|
|
Closed back design prevents accidental shorts and corrosion by completely insulating power from the mounting surface. Each screw pair is one isolated circuit Optional jumpers allow creation of common circuits Fasteners and conductors are nickel-plated brass Combination fasteners accept slot and Phillips screwdrivers Bus Material Nickel-Plated Brass Base Material Nylon Screw Size #8 Continuous Rating 30 Amperes AC/DC Voltage Rating 600 Volts AC/DC Maximum Width.
Part No: 2504
|
|
|
|
Magnetic AC circuit features neutral circuit on one pole and hot on other. Trips both if either is switched. Combines switching and circuit protection into single device. 277 vAC. Ship 0.5 lbs.
Part No: 7234
|
|
|
|
Electrical->Switches, Fuses & Accessories->ATO/ATC Fuse Block Systems
Clear insulating cover insulates all conductive parts meeting ABYC/USCG requirements, and color-coding makes determining amperage easy.
Part No: 5026
|
|
|
|
DC Digital Voltmeter Panel Mfr. PN: 8051 Model # 594129 Contains PN 8235 DC Digital Meter 7-60 Volts DC 4 digit display 3 position switch for multiple battery banks Full-size 2-3/4” meter Voltage 60 Volts DC Maximum Dimensions 3.75”H (95.25mm) x 5.25”W (133.35mm) DC Analog Voltmeter Panel Mfr.
Part No: 8015
|
|
|
|
Great for limited space applications in electronics cabinets and under dashboards. The underside is sealed with no exposed conductive parts for mounting on conductive surfaces, and the recessed mounting holes eliminate accidental shorts to aluminum and steel mounting surfaces (use #10 screws to mount).
Part No: 2105
|
|
|
|
|
Useful as general indicators or as alarms, these lights easily install in any Blue Seas Systems' circuit breaker panel.
Part No: 8033
|
|
|
|
|
Useful as general indicators or as alarms, these lights easily install in any Blue Seas Systems' circuit breaker panel.
Part No: 8034
|
|
|
|
BREAKER-80A PANLMNT
Part No: 7014
|
|
|
|
Electrical->Meters & Distribution->Blue Sea Systems DC Panels
Blue Sea Systems Panels reflect the kind of quality and attention to detail that premier yacht designers and builders are specifying for the finest custom and production yachts, as well as commercial vessels worldwide. These fine panels are cut from heavy 1/8'' 5052 aluminum alloy and undercoated with a MIL-C-5541C spec.
Part No: 8025
|
|
|
|
Electrical->Meters & Distribution
Part No:
|
|
|
|
|
6000 Ampere Interrupt Capacity (AIC) satisfies ABYC requirements for main DC circuit protection on large battery banks. Tin-plated connector blades resist corrosion Blown condition is visible Max.
Part No: 5133
|
|
|
|
Electrical->Batteries & Accessories->Battery Switches & Cable->M-Series Single Circuit On/Off Battery Switchs
Just 2 7/8” square but rated 300A continuous/500A intermittent/ 700A cranking/ 1500A inrush at up to 48V. Ignition protected, safe for use aboard gas powered boats. Long.870" one-piece copper studs accept multiple cables. Case design allows surface or, front panel or rear panel mounting.
Part No: 6005
|
|
|
|
Up to 600 Amperes Continuous Rating for large diesel engines, high power output, an low heat generation These switches have a continuous amp rating substantially higher than standard switches for large diesel engines, high power output and low heat generation.
Part No: 3002
|
|
|
|
|
Electrical->Meters & Distribution->Mega (Sea) Fuses
Mega Fuses Compact in-line fuses connect with 5/16" fasteners like those on the Mega Fuse Holder. Time to blow depends on the current flow as a percentage of the fuse rating. When exceeding 140% of the rating, it takes about 200 seconds. At 180%, 6 seconds.
Part No: 5102
|
|
|
|
Electrical->Batteries & Accessories->Battery Switches & Cable->Cable Caps for Add-on Battery Terminals
Use on batteries with automotive-style terminals to which you’ve added clamp-on marine terminals. Molded PVC enables installation of the CableCap after the terminals are crimped on cables.
Part No: 4006
|
|
|
|
Electronics->Antennas, Mounts, Cable->Blue Sea Cable Clam Fittings
Fits connectors to 1.325''. For most radars and multiple wires. Measures 2 1/2''D x 1 3/16''H.
Part No: 1002
|
|
|
|
|
Fits connectors to 1.325''. For most radars and multiple wires. Measures 2 1/2''D x 1 3/16''H.
Part No: 1003
|
|
