Top Sellers
Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .
|
|
|
2" ID, 90° Marine Rubber Exhaust Elbow from SHIELDS RUBBER
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
|
5" ID, 45° Marine Rubber Exhaust Elbow from SHIELDS RUBBER
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Series 315 Outboard Fuel Hose - 3/8"ID from SHIELDS RUBBER
Premium-quality fuel hose designed for outboard feed and vent lines. Remains flexible at low temperatures and resists UV sunlight. Silverado 2000 complies with SAE J1527 Type B2 specifications. Should not be used in applications requiring the use of Type B1 fuel feed line.
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
|
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Soy Shaker from JOHNSON PUMPS
PRP SpillBuster Soy is a unique 100% natural and biodegradable oil spill cleanup tool. It absorbs petroleum hydrocarbons, floats with the contamination on the surface and stimulates indigenous microbes to biodegrade the oil (and itself) into CO2 and water. PRP can be used to remediate contaminated soil as well. Simply sprinkle the PRP powder on the contaminated area and watch it disappear. No residue remains! Coverage: 100sq/ft per lb. at 1/16" thick.
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
|
2" from SHIELDS RUBBER, 1, 1-1, 16"OD from SHIELDS RUBBER
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 162 Polyester Reinforced Clear PVC Tubing
Heavy-walled, FDA-approved compound vinyl hose. Nontoxic, tasteless, odorless. Polyester braid-reinforced. Temp range: 25°–150°F. For use in hot or cold pressure water systems (burst pressure is 250lb. ), vent and drain lines, bilge pump discharge. Sold per foot; 50' max continuous length. Meets NSF-61 requirements. Application: Pressurized water system supply, drain lines, head intake, washdown pumps. Material: FDA formula vinyl. Reinforcement: Polyester braid.
Part No: 116-162-0126
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 162 Polyester Reinforced Clear PVC Tubing
Heavy-walled, FDA-approved compound vinyl hose. Nontoxic, tasteless, odorless. Polyester braid-reinforced. Temp range: 25°–150°F. For use in hot or cold pressure water systems (burst pressure is 250lb. ), vent and drain lines, bilge pump discharge. Sold per foot; 50' max continuous length. Meets NSF-61 requirements. Application: Pressurized water system supply, drain lines, head intake, washdown pumps. Material: FDA formula vinyl. Reinforcement: Polyester braid.
Part No: 116-162-0586
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->T-Bolt 316 Stainless-Steel Exhaust Hose Clamps
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
Part No: 118-720-8000
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1183
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 135 Heavy-Duty Water Hose
Use for engine water, sinks, icebox, drain lines, bilge pumps and air conditioners. Sold per foot; 50' maximum continuous length. Application: Engine heater hose, heat exchanger, A/C circulation; sink, icebox shower and livewell drain lines, head intake. Material: EDPM rubber. Reinforcement: Polyester fabric spiral. Temperature Range: –40° to 190°F. Working Pressure: 200psi.
Part No: 116-135-0586B
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-3183
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps
Premium fabric-reinforced marine hose for use in marine water and wet-exhaust applications. Use where wire support is unnecessary. Designed for engine water circulation, heat exchanger, heavy-duty discharge lines and straight marine wet-exhaust connections.
Part No: 16-200-1140
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 135 Heavy-Duty Water Hose
Use for engine water, sinks, icebox, drain lines, bilge pumps and air conditioners. Sold per foot; 50' maximum continuous length. Application: Engine heater hose, heat exchanger, A/C circulation; sink, icebox shower and livewell drain lines, head intake. Material: EDPM rubber. Reinforcement: Polyester fabric spiral. Temperature Range: –40° to 190°F. Working Pressure: 200psi.
Part No: 116-135-0346B
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-2383
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 120 Bilgeflex Hose
Ideal intake and discharge for pumps and livewell aerators. Corrugated polyethylene resists bilge acids and sea water. Not for use in below-waterline thru-hull connections. Clamping cuff every foot. Standard pack is 50'. White. Application: Bilge pump discharge. Do not attach to thru-hulls below waterline. Material: Corrugated polyethylene, with clamping cuff every foot. Reinforcement: None. Temperature: N/A.
Part No: 116-120-1126W
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Series 365 Fire-Acol Low-Permeation Fuel Hose
Special design NBR tube with an embedded plastic barrier layer limits permeation. The design of this hose provides easy coupling insertion and the NBR/PVC cover is weather and UV resistant. The hose is also polyester reinforced and fire-resistant. Fuel Type: Fuel feed (gasoline up to 85% ethanol blended fuels/diesel/bio-diesel all blends) . Approvals: SAE J1527 Type A1-15 and ISO 7840 Type A1 . Construction: Reinforced with high strength synthetics to resist gasoline/alcohol permeation .
Part No: 116-365-0120
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->T-Bolt 316 Stainless-Steel Exhaust Hose Clamps
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
Part No: 118-720-1120
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 148 Multi-Purpose Vinyl Hose
Excellent for critical bilge, drain, scupper line and potable water fill applications. FDA-approved low water-absorption compounds have excellent resistance to odor permeation and toilet chemicals. Reinforced with hard vinyl helix for good bend radius, vacuum rating and corrosion protection. Smooth cover permits clamping without cuffs. Do not use in pressurized water systems. Application: Sanitation, bilge pump intake/discharge, drains, scupper, water tank fill. Reinforcement: Vinyl helix.
Part No: 116-148-1126W
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 150 Clear PVC Tubing
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
Part No: 116-150-0587
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Series 200 Exhaust/Water Hose (No Wire)
Premium fabric-reinforced marine hose for use in marine water and wet-exhaust applications. Use where wire support is unnecessary. Designed for engine water circulation, heat exchanger, heavy-duty discharge lines and straight marine wet-exhaust connections.
Part No: 116-200-5003
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps
Recommended for vanity, sink, shower drain lines and above-waterline scuppers. Also excellent for high-capacity manual pump discharge. Flexible, abrasion-resistant vinyl blend with vinyl coated helical wire. Nylon reinforcement. Sold per foot. Standard pack is 50'. ID: 1 1/2" Application: Bilge Pump intake/discharge, drains. Material: PVC. Reinforcement: Steel wire. Temperature Range: N/A. Burst Strength: N/A.
Part No: 116-140-1126
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Series 200 Exhaust/Water Hose (No Wire)
Premium fabric-reinforced marine hose for use in marine water and wet-exhaust applications. Use where wire support is unnecessary. Designed for engine water circulation, heat exchanger, heavy-duty discharge lines and straight marine wet-exhaust connections.
Part No: 116-200-6003
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->T-Bolt 316 Stainless-Steel Exhaust Hose Clamps
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
Part No: 118-720-3000
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 150 Clear PVC Tubing
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
Part No: 116-150-0146
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Series 141 Multiflex Hose
For potable water fill, sink and shower drains and livewell aerators. FDA-approved vinyl compounds are supported by a rigid black vinyl helix. Not recommended for sanitation or below-waterline thru-hull connections. Sold per foot; 50' maximum continuous length. Application: Bilge pump discharge, drains, water tank fill. Material: FDA formula PVC. Reinforcement: Vinyl helix. Temperature Range: Ambient temperatures. Approvals: FDA.
Part No: 116-141-1126B
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Sanitation Hose Fittings
Fiberglass-reinforced nylon fittings designed to fit Shields Series 101, 148 and 144 hoses without heating or special tools. Use in sanitation systems, deck drain systems and water tank fill.
Part No: 118-803-1120
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Exhaust Elbows
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
Part No: 116-245-4000KIT
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Exhaust Elbows
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
Part No: 116-290-3000KIT
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->T-Bolt 316 Stainless-Steel Exhaust Hose Clamps
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
Part No: 118-720-2120
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->T-Bolt 316 Stainless-Steel Exhaust Hose Clamps
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
Part No: 118-720-3120
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->T-Bolt 316 Stainless-Steel Exhaust Hose Clamps
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
Part No: 118-720-4000
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-3003
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Vinylvent Ventilator Hoses
PVC hose supported by anodized wire helix. Resistant to ozone, sunlight and weathering. Self-extinguishing material will not support a flame. One-year warranty. Sold by the foot. Material: PVC hose Cutout Size: Surface mount.
Part No: 116-400-3000W
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1123
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 148 Multi-Purpose Vinyl Hose
Excellent for critical bilge, drain, scupper line and potable water fill applications. FDA-approved low water-absorption compounds have excellent resistance to odor permeation and toilet chemicals. Reinforced with hard vinyl helix for good bend radius, vacuum rating and corrosion protection. Smooth cover permits clamping without cuffs. Do not use in pressurized water systems. Application: Sanitation, bilge pump intake/discharge, drains, scupper, water tank fill. Reinforcement: Vinyl helix.
Part No: 116-148-1006W
|
|
|
