Top Sellers
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
|
|
Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
Windshield Screw Cover Foam, 5/8"H x 1-1/4"W x 8'L from TACO PRODUCTS
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
|
|
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
3/16" Stock Dia. U-Bolt, 1-3/8” Thread Length, 1-3/16" Hole Spacing, 1" Eye Dia. from SEAFIT
Stainless steel U-Bolts have metric threads. The top plate is held in place by small ears that are forged into the U-bolt. Includes matching backing plate. ShWt .
|
|
8"ID from SHIELDS RUBBER, 1, 1-1, 16"OD from SHIELDS RUBBER
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Hump Hoses
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
Part No: 116-220-4000KIT
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1343
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1383
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Series 120 Bilgeflex Hose
Ideal intake and discharge for pumps and livewell aerators. Corrugated polyethylene resists bilge acids and sea water. Not for use in below-waterline thru-hull connections. Clamping cuff every foot. Standard pack is 50'. White. Application: Bilge pump discharge. Do not attach to thru-hulls below waterline. Material: Corrugated polyethylene, with clamping cuff every foot. Reinforcement: None. Temperature: N/A.
Part No: 116-120-1186W
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Exhaust Elbows
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
Part No: 116-290-2000KIT
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 315 Silverado 2000 Outboard Fuel Hose
Premium-quality fuel hose designed for outboard feed and vent lines. Remains flexible at low temperatures and resists UV sunlight. Silverado 2000 complies with SAE J1527 Type B2 specifications. Should not be used in applications requiring the use of Type B1 fuel feed line.
Part No: 116-315-0386
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-3123
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1583
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 120 Bilgeflex Hose
Ideal intake and discharge for pumps and livewell aerators. Corrugated polyethylene resists bilge acids and sea water. Not for use in below-waterline thru-hull connections. Clamping cuff every foot. Standard pack is 50'. White. Application: Bilge pump discharge. Do not attach to thru-hulls below waterline. Material: Corrugated polyethylene, with clamping cuff every foot. Reinforcement: None. Temperature: N/A.
Part No: 116-120-1146W
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 162 Polyester Reinforced Clear PVC Tubing
Heavy-walled, FDA-approved compound vinyl hose. Nontoxic, tasteless, odorless. Polyester braid-reinforced. Temp range: 25°–150°F. For use in hot or cold pressure water systems (burst pressure is 250lb. ), vent and drain lines, bilge pump discharge. Sold per foot; 50' max continuous length. Meets NSF-61 requirements. Application: Pressurized water system supply, drain lines, head intake, washdown pumps. Material: FDA formula vinyl. Reinforcement: Polyester braid.
Part No: 116-162-1006
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-0783
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Exhaust Elbows
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
Part No: 116-245-5000KIT
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Series 365 Fire-Acol Low-Permeation Fuel Hose
Special design NBR tube with an embedded plastic barrier layer limits permeation. The design of this hose provides easy coupling insertion and the NBR/PVC cover is weather and UV resistant. The hose is also polyester reinforced and fire-resistant. Fuel Type: Fuel feed (gasoline up to 85% ethanol blended fuels/diesel/bio-diesel all blends) . Approvals: SAE J1527 Type A1-15 and ISO 7840 Type A1 . Construction: Reinforced with high strength synthetics to resist gasoline/alcohol permeation .
Part No: 116-365-0380
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-0123
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 148 Multi-Purpose Vinyl Hose
Excellent for critical bilge, drain, scupper line and potable water fill applications. FDA-approved low water-absorption compounds have excellent resistance to odor permeation and toilet chemicals. Reinforced with hard vinyl helix for good bend radius, vacuum rating and corrosion protection. Smooth cover permits clamping without cuffs. Do not use in pressurized water systems. Application: Sanitation, bilge pump intake/discharge, drains, scupper, water tank fill. Reinforcement: Vinyl helix.
Part No: 116-148-0586W
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-0580
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 150 Clear PVC Tubing
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
Part No: 116-150-0347
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->T-Bolt 316 Stainless-Steel Exhaust Hose Clamps
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
Part No: 118-720-5000
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-1783
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Series 350/355/368/369 Fire-Acol™ Fuel Hose
Premium fire-retardant marine fuel hose with high-nitrile tube handles alcohol-enhanced gasolines. USCG- and NMMA-approved for use with gasoline and diesel. Reinforced with two layers of high-strength synthetic fabric. Sold by the foot. Select TYPE 1 Low Permeation Feed/Vent Hose or TYPE 2 Vent/Fill Hose. Rating: Feed/vent or vent/fill hose . Approvals: SAE J1527 Type A1 & A2 . Construction: Reinforced hose w/ two layers of high strength fabric . Burst Strength: See model description.
Part No: 116-355-1120
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-0583
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 162 Polyester Reinforced Clear PVC Tubing
Heavy-walled, FDA-approved compound vinyl hose. Nontoxic, tasteless, odorless. Polyester braid-reinforced. Temp range: 25°–150°F. For use in hot or cold pressure water systems (burst pressure is 250lb. ), vent and drain lines, bilge pump discharge. Sold per foot; 50' max continuous length. Meets NSF-61 requirements. Application: Pressurized water system supply, drain lines, head intake, washdown pumps. Material: FDA formula vinyl. Reinforcement: Polyester braid.
Part No: 116-162-0386
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 250 ShieldsFlex II Marine Water/Exhaust Hose with Wire
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
Part No: 116-250-2783
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 101 No-Odor Super Head Hose
Thick, tough multilayer rayon cord and rubber hose specially compounded to give maximum resistance to odor permeation and toilet chemicals. Sold by the foot. Application: Toilet to holding tank, holding tank pump-out . Material: EDPM rubber . Reinforcement: Wire helix and two fabric plies . Temperature Range: 212°F maximum . Vacuum Rating: 28 . Minimum Bend Radius: N/A .
Part No: 116-101-1003
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 148 Multi-Purpose Vinyl Hose
Excellent for critical bilge, drain, scupper line and potable water fill applications. FDA-approved low water-absorption compounds have excellent resistance to odor permeation and toilet chemicals. Reinforced with hard vinyl helix for good bend radius, vacuum rating and corrosion protection. Smooth cover permits clamping without cuffs. Do not use in pressurized water systems. Application: Sanitation, bilge pump intake/discharge, drains, scupper, water tank fill. Reinforcement: Vinyl helix.
Part No: 116-148-1186W
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Series 141 Multiflex Hose
For potable water fill, sink and shower drains and livewell aerators. FDA-approved vinyl compounds are supported by a rigid black vinyl helix. Not recommended for sanitation or below-waterline thru-hull connections. Sold per foot; 50' maximum continuous length. Application: Bilge pump discharge, drains, water tank fill. Material: FDA formula PVC. Reinforcement: Vinyl helix. Temperature Range: Ambient temperatures. Approvals: FDA.
Part No: 116-141-0346B
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Series 141 Multiflex Hose
For potable water fill, sink and shower drains and livewell aerators. FDA-approved vinyl compounds are supported by a rigid black vinyl helix. Not recommended for sanitation or below-waterline thru-hull connections. Sold per foot; 50' maximum continuous length. Application: Bilge pump discharge, drains, water tank fill. Material: FDA formula PVC. Reinforcement: Vinyl helix. Temperature Range: Ambient temperatures. Approvals: FDA.
Part No: 116-141-1186B
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Hump Hoses
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
Part No: 116-220-6000KIT
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Bulk Hose->Series 150 Clear PVC Tubing
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
Part No: 116-150-0127
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->T-Bolt 316 Stainless-Steel Exhaust Hose Clamps
Designed to assure proper coupling retention for large ID marine exhaust hose. T-Bolt Band Clamps offer a 360° clamping surface, and are ideal for any below-waterline application. 3/4" band spreads the clamping force evenly around hose. Designed to fit Shields hose #200, 210, and 250. Application: Exhaust hose clamp; intake hose clamp - any below waterline application; works with corrugated exhaust hose; full 360° clamping surface . Material: 316 stainless steel (0. 75"W) .
Part No: 118-720-6000
|
|
|
