Top Sellers
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
|
|
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Shut-Off Switch from SHURFLO
>Adaptable to any 1/2" hose, this shut-off switch allows for easy on/off operation.
|
LP Enamel - Hatteras White, Quart from STERLING
A popular choice among many boatyard professionals as well as do-it-yourself boat owners who want superb gloss and durability. Pros spray it, yet the Sterling Brushing System captures the same look, thanks to its unique flow properties. Sterling brushing system: Pick a color base, mix 2:1 with U-2964. Add a dash of U-2900 accelerator in cool weather. Thin about 25% with U-2965. Apply on nonskid surfaces with low-nap foam rollers and tip several times. Apply with premium China bristle brush.
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
1/4" Aluminum Hose Barb, 1/4" Make Thread from MOELLER
Barb-Fuel 1/4Npt x 1/4 M Thrd|Barb-Fuel 1/4Npt x 1/4 M Thrd.
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
|
1, 2"L from SHURFLO, from SHIMANO REELS, 4" Wingnut from SHURFLO, 2-1
|
|
Home -> Fishing -> Reels->Baitrunner Spinning Reels
Featuring new spinning reel technology and a modern, compact design, Shimano has re-launched its proven Baitrunner series, with a secondary drag system that allow baits to swim free with the bail closed. Propulsion Line Management System: Propulsion Spool Lip, S-Arm Cam, SR One-Piece Bail Wire, Power Roller III. S-Concept: S-Rotor, S-Arm Cam, Direct Drive Mechanism (Thread-In Handle Attachment), Oversized Septon Grips for Power and Comfort, WP Drag (Waterproof Drag). Machined Aluminum Handle.
Part No: BTR6000D
|
|
|
|
Home -> Fishing -> Reels
Incorporating the Propulsion Line Management system for longer casts and reduced backlash, the Sienna FD uses Super Stopper II for instant anti-reverse with no backplay from the diminutive 500 size for ultralight applications up to the 4000 size perfectly suited for large freshwater fish to inshore species. Propulsion Spool Lip. Graphite Frame. Graphite Sideplate. Graphite Rotor. Aluminum Spool. Varispeed Oscillation. Ported Handle Shank. Super Stopper II. Dyna-Balance. Power Roller II.
Part No: SN4000FDC
|
|
|
|
Home -> Fishing -> Reels -> Conventional Reels
Small Reel - Big Fish! The TAC10II is designed for fishing 40-50lb PowerPro with a 30-40 Fluorocarbon leader (up to 13 lbs of drag at strike and 20 lbs at full), whereas the TAC12II is designed for fishing 65lb-80lb PowerPro with a 60lb-80lb Fluorocarbon top shots (up to 22lbs of drag at strike and 40 lbs.
Part No: TAC12II
|
|
|
|
Home -> Fishing -> Reels
Incoporating all the latest techonology such as the Propulsion Line Management System to S A-RB bearings, the new compact profile lineup fo Baitrunners can handle nearly any live-bait application from the new small 4000 size for freshwater and inshore species to the large 12000 size for Bluewater.
Part No: BTR12000D
|
|
|
|
Home -> Fishing -> Reels
Incorporating the Propulsion Line Management system for longer casts and reduced backlash, the Sienna FD uses Super Stopper II for instant anti-reverse with no backplay from the diminutive 500 size for ultralight applications up to the 4000 size perfectly suited for large freshwater fish to inshore species. Propulsion Spool Lip. Graphite Frame. Graphite Sideplate. Graphite Rotor. Aluminum Spool. Varispeed Oscillation. Ported Handle Shank. Super Stopper II. Dyna-Balance. Power Roller II.
Part No: SN2500FDC
|
|
|
|
Home -> Fishing -> Reels -> Spinning Reels
Incorporating the Propulsion Line Management system for longer casts and reduced backlash, the Sienna FD uses Super Stopper II for instant anti-reverse with no backplay from the diminutive 500 size for ultralight applications up to the 4000 size perfectly suited for large freshwater fish to inshore species. Propulsion Spool Lip. Graphite Frame. Graphite Sideplate. Graphite Rotor. Aluminum Spool. Varispeed Oscillation. Ported Handle Shank. Super Stopper II. Dyna-Balance. Power Roller II.
Part No: SN1000FDC
|
|
|
|
Home -> Fishing -> Reels
Small Reel - Big Fish! The TAC10II is designed for fishing 40-50lb PowerPro with a 30-40 Fluorocarbon leader (up to 13 lbs of drag at strike and 20 lbs at full), whereas the TAC12II is designed for fishing 65lb-80lb PowerPro with a 60lb-80lb Fluorocarbon top shots (up to 22lbs of drag at strike and 40 lbs.
Part No: TAC10II
|
|
|
|
Home -> Fishing -> Reels
Small Reel - Big Fish! The TAC8II and TAC10II were designed for fishing 40-50lb PowerPro with a 30-40 Fluorocarbon leader (up to 13 lbs of drag at strike and 20 lbs at full), whereas the TAC12II and TAC16II were designed for fishing 65lb-80lb PowerPro with a 60lb-80lb Fluorocarbon top shots (up to 22lbs of drag at strike and 40 lbs.
Part No: TAC16II
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Automatic Freshwater Pump Service Kits
null.
Part No: 94-232-06
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Pump Port Adapters
.
Part No: 94-181-13
|
|
|
|
Home -> Plumbing -> General Purpose Pumps -> General Purpose Pumps->Extreme™ ProBlaster™ Washdown Pumps
The ultimate in washdown capabilities with over 5. 5gpm and pressure up to 45psi. This high-volume pump will blast grime away from your deck quickly and easily. The corrosion-resistant coated seamless motor shell with sealed switch provides excellent protection against the harsh marine environment. Quick disconnect fittings included. Runs dry without damage and is ignition protected. Built-In Switch: Built-in 45psi pressure switch . Self-Prime: 9' . Material: Glass-reinforced nylon body .
Part No: 5901-2212
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower->Elite Folding Tap & Faucet
Save space with this faucet’s easy-folding spout. Ceramic disc valves make temperature adjustments a snap. The folding tap works great with a sink, under a seat or at a bait station. Material: Brass . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 1-1/2"dia. Warranty: Five years. Manufacturer's Documents Installation Guidelines.
Part No: 133-0209-CP
|
|
|
|
Home -> Fishing -> Fishing Accessories->Piranha Straight Aerators
Designed for serious anglers, the Piranha Straight Aerator features strong UV stabilized, glass-filled nylon construction and comes complete with a through-hull fitting with nut and washer for easy mounting.
Part No: 357-112-10
|
|
|
|
Home -> Fishing -> Fishing Accessories
Shurflo Transom Bracket .
Part No: 94-636-00
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower->Shurflo Electric Faucets
null.
Part No: 94-009-20
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Pump Port Adapters
.
Part No: 94-181-11
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Extreme™ Series Smart Sensor Water Pumps
Designed specifically for cruisers, midsize and larger yachts, these pumps incorporate a special sensor that precisely monitors your system’s water pressure and adjusts the motor’s speed, eliminating the need for a pressure switch and accumulator tank. The four/five chamber design and large inlet and outlet passages maximize water flow, and provide “just like home” showers and pump operation offshore or at the dock. ” Run dry without damage. Material: Glass-reinforced nylon body and baseplate .
Part No: 4901-1211
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Pump Port Adapters
.
Part No: 94-181-12
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Dual Head Pump Service Kits
Dual Head Pump Service Kits for Models 7013378 and 7013386.
Part No: 94-120-00
|
|
|
|
Home -> Plumbing -> General Purpose Pumps -> General Purpose Pumps
Everything you need for tough washdown applications all in one package. Includes the durable 4. 0gpm Pro Blaster washdown pump. Blaster Nozzle. Raw Water Strainer. 3/4" and 5/8" garden hose adapters . UV-protected 25' coiled hose. Coated, seamless motor shell for enhanced protection against wet environments. Manufacturer's Documents Installation Guidelines.
Part No: 4903-4282
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower
Ambassador Marine Ultra-Mirror Cylinder Sink Made from the highest grade 304 stainless steel available, this sink has a surface quality that is unmatched in the industry. Exclusive SoundKOTE Noise Reduction Technology reduces the unpleasant clanging sound so often associated with stainless steel sinks. 11" dia. x 7"D. Most sinks work with over- or under-mount installations. All sinks are made from heavy gauge stainless steel.
Part No: S14-2701-UM-D
|
|
|
|
Home -> Fishing -> Fishing Accessories->Piranha Cartridges
These cartridges are designed specifically to handle continuous duty from your livewell/aerator pump.
Part No: 94-619-00
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Metal Plumbing Fittings->Raw Water Strainers
Assembly features durable nylon upper housing, clear polymide twist-off bowl and pop-out, 50-mesh stainless steel screen.
Part No: 253-321-01
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->Blaster and Pro Blaster Washdown Pumps
Blast the grimiest decks clean with one of these durable freshwater/saltwater pumps. Positive-displacement three/four chamber diaphragm design is self-priming up to 6' and can run dry without damage. Include 3/4" and 5/8" garden hose adapters. Pro Blaster features higher capacity and a seamless motor shell for enhanced protection in saltwater environments. Suitable for mounting in wet locations. Include fittings and Blaster spray nozzle. Switch Type: Sealed 45psi pressure switch .
Part No: 4901-5282
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Automatic Freshwater Pump Service Kits
null.
Part No: 94-375-13
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->In-Line Water Strainers
The clear bowl lets you see if debris is inside, and the simple twist-off design makes cleaning a snap.
Part No: 254-266
|
|
|
|
Home -> Fishing -> Fishing Accessories->Bait Sentry™ Pumps
The Bait Sentry’s magnetically driven impeller moves large quantities of water and handles solid debris without motor damage. If the impeller locks up, magnets break free, saving the motor from burnout. 24-hour dry run time. Type: Bait tank pump . Inlets/Outlets: 3/4" NPT inlet, 3/4" Barb outlet (1100 GPH model has 1-1/8" barbed outlet) . Features: Includes dual port for easy washdown connections, continuous duty, ignition protected, Marine UL Listed . Warranty: Three years .
Part No: 1700-011-030
|
|
|
|
Home -> Plumbing -> Fittings & Valves
Use this quality nylon valve in common plumbing applications to safeguard against back surge. 1/2" barbed hose connections.
Part No: 340-001
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Pump Port Adapters
.
Part No: 94-181-02
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Pump Port Adapters
.
Part No: 94-181-04
|
|
|