Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Fuel Filter Cartridge from SIERRA
FILTER Replaces: Mercruiser 35-866171A01 Fits: 350 Mag MPI Alpha/Bravo, 350 Mag MPI Horizon Alpha/Bravo, 350 Mag MPI Horizon MIE, 350 Mag MPI MIE, 496 MAG, 496 MAG H. O. , 5. 0 MPI Alpha/Bravo, 8. 1L Inboard, 8. 1L Inboard H. O. , MX 6.
|
3/8 inch inline fuel filter from SIERRA
For use on McCulloch/Scott-Atwater, Suzuki Outboard and Yamaha Outboard 18-7831 is replacement for Johnson/Evinrude Outboard #398319.
|
8V-92, 8V71, replaces Detroit Diesel 5574508 from SIERRA
Remove harmful contaminants without filtering detergent additivesRemove harmful contaminants without filtering detergent additives. Engineered for long life, low restriction and efficient filtering performance.
|
Sierra-Tube-Exhaust from SIERRA
Some larger V-8 engines that create a large amount of back pressure use exhaust tubes rather than bellows. This helps to relieve the excessive pressure and eliminate problems with premature bellows failure. In the past, the exhaust bellows would blow up like a balloon and cause the drive shaft bellows to rub against the yoke and U-joints causing holes in the bellows.
|
Prop Nut Kit, Yamaha V4/V6 from SIERRA
An excellent emergency item to carry in your toolbox, for those occasions when the prop nut is misplaced or lost.
|
Exhaust Flapper Valve - 4" from SIERRA
Heavy duty rubber flapper valve keeps following seas from entering exhaust outlet when moving slowly or stopping.
|
|
Filter from SIERRA, 3854194 from SIERRA, Lowerunit from SIERRA
|
|
Home -> Engine Systems -> Engine Parts
An OMC Sterndrive/Cobra Ball Gear Kit, including O-rings, plugs, ball gear, locknuts, and oil seals. Ball Gear Kit for OMC Sterndrive 1973-86 models contains: 1 O-Ring (Sierra# 18-7121)(O. E. # 308621). 2 Plugs (Sierra# 18-4251)(O. E. # 908062). 1 Ball Gear (Sierra# 18-2176)(O. E. # 908063). 1 Ball Gear (Sierra# 18-2177)(O.
Part No: 18-2178
|
|
|
|
Home -> Engine Systems -> Engine Parts->Exhaust Manifolds, Elbows, Risers
Sierra exhaust manifolds, risers and elbows are 100% painted where the competition sends theirs out in primer alone. When the technician buys a manifold from us, time spent watching paint dry is saved for other profit generating work. Manifolds, risers and elbows are individually packaged in Instapack, an expanding packaging foam that keeps the part from chipping and breaking during transportation Water left in manifolds over the winter months can freeze and crack requiring replacement.
Part No: 18-1999
|
|
|
|
Home -> Engine Systems -> Engine Parts
O-ring, package of 5.
Part No: 18-7109-9
|
|
|
|
Home -> Engine Systems -> Engine Parts
2 per package.
Part No: 18-2505-9
|
|
|
|
Home -> Engine Systems -> Engine Parts->Impeller Repair Kits for Outboards
WTR PUMP KIT W/HSNG.
Part No: 18-3382
|
|
|
|
Home -> Engine Systems -> Engine Parts->Manifold Spacers
Applications: MerCruiser 61851A1 (Model 5327994): For: 18-1950, 18-1951-1, 18-1958-1, 18-1960-1 Manifolds. Barr, Indmar & Marine Power Ford Small Block V8 302-351cu. in, GM Small Block V8 305-350cu. in. GM Big Block V8 454cu. in. (Model 5328018): For: 18-1998-1, 18-1997-1, 18-1898 Manifolds.
Part No: 18-1906
|
|
|
|
Exhaust Elbow Mounting Kit Mercruiser GM 4 Cylinder 181cu. in. (Models: 120,140, 2. 5L,3. 0L). GM Inline 6 Cylinder 250-292cu. in. (Models: 165 and 200). Ford Small Block V8 302-351cu. in. (Models: 215,225,233, 255,888).
Part No: 18-8512
|
|
|
|
Exhaust Manifold Mounting Kit Mercruiser GM V6 229 and 262cu. in.
Part No: 18-8533
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Electrical Eng Parts->Starter Mount Solenoids
Starter Mount Solenoids A. 18-5837 Delco Metric Solenoid - Fits all GM starters since 1986 except permanent magnet. Fits all Sierra rebuilt and new starters Replaces Mercury P/N 33261, 89-99253, 89-18080. B. 18-5838 Delco Old Style English Solenoid Fits GM starters up to 1986. Replaces Mercury P/N 89902, 33261. C. 18-6287 Solenoid For GM style permanent magnet starters. D. 18-5802 Ford Starter Solenoid Also fits Mercury built four cyl. 470 series engines.
Part No: 18-6291
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra-Carburetor Kits
Sierra carb kits and gaskets for engine tune ups.
Part No: 18-2504
|
|
|
|
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
Part No: 5321518
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Replacement 21 Micron Filter Elements
Traps the smallest particles and emulsifies water from gasoline with 21-micron filter media. Epoxy coated inside and powdercoated outside for corrosion resistance. Shrink-wrapped for rust protection. Not recommended for use on diesel engines or with electric fuel pumps using in-line fuel filters. Will not separate two-cycle oil from gasoline. Will not separate 2-cycle oil from gasoline.
Part No: 18-7844
|
|
|
|
Home -> Engine Systems -> Engine Parts
200' by 5/32" Replaces OMC 322236.
Part No: 18-4911
|
|
|
|
Home -> Engine Systems -> Engine Parts
Sierra 18-3578 Water Pump. OMC Sterndrive/Cobra 2.
Part No: 18-3578
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Exhaust, Manifolds
Replaces: Mercruiser Inboard/Outboard #32-14358T 4" lower tube.
Part No: 18-2746
|
|
|
|
Home -> Engine Systems -> Engine Parts
Replacement for Mercury/Mariner Outboard #46-60366A1.
Part No: 18-3507
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra-Carburetor Kits
Sierra carb kits and gaskets for engine tune ups.
Part No: 18-7215
|
|
|
|
Home -> Engine Systems -> Engine Parts->Trim Cylinders
Sierra Power Trim Cylinders feature a high-gloss finish, excellent corrosion resistance and a marine-grade stainless-steel shaft. Tested for safety and durability. Click to view Trim Cylinder Application Chart (PDF).
Part No: 18-2422
|
|
|
|
Home -> Engine Systems -> Engine Parts->Power Packs
We use only grade 1 components in our electronic replacement parts. Grade 1 components are the best available electrical components. We normally avoid OEM patents by improving the quality of these units by adding additional circuit protection.
Part No: 18-5774
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra-Carburetor Kits
Sierra carb kits and gaskets for engine tune ups.
Part No: 18-7248
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->MerCruiser Alpha I & Gen II Upper Drive Units
Built with proven components, the gears in these units have passed a 300 hour extreme endurance test with flying colors. All units are pressure and vacuum tested and subjected to stringent quality control tests at every step of the manufacturing process. Note: All Gen II upper and lower units built to 1998 and up specifications.
Part No: 18-2453
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra Oil Filters
Sierra high-efficiency oil filters meet or exceed OEM specifications for marine use, unlike conventional auto oil filters. Available for gasoline inboard and 4-stroke outboard applications. High pleat count more pleats means more capacity and greater efficiency. Epoxy coated inside for corrosion resistance. Shrink-wrapped for rust protection. Some models utilize anti-drainback valves, where applicable. Meet or exceed OEM specifications for marine use.
Part No: 18-7916
|
|
|
|
Home -> Engine Systems -> Engine Parts->Water Shutters
Exhaust Systems Water Shutters.
Part No: 18-1507
|
|
|
|
Sierra's leadership in the marine industry continues with the addition of 20 new belts and 8 new hoses for late model stem drive and inboard application. An industry first, Sierra is excited to announce its new line-up of Serpentine belts. 14 Serpentine belts for late model coverage on Mercruiser V6 and V8 big/small block applications. Belts are polyester corded for long-life and durability. Hoses are molded for exact fit and precise installation.
Part No: 18-15112
|
|
|
|
Sierra's leadership in the marine industry continues with the addition of 20 new belts and 8 new hoses for late model stem drive and inboard application. An industry first, Sierra is excited to announce its new line-up of Serpentine belts. 14 Serpentine belts for late model coverage on Mercruiser V6 and V8 big/small block applications. Belts are polyester corded for long-life and durability. Hoses are molded for exact fit and precise installation.
Part No: 18-15115
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Cooling Systems->Thermostat Gaskets, Kits, Hoses
Please choose your part using Sierra's part number.
Part No: 18-3500
|
|
|
|
**COMP LOW 89-92|**COMP LOW 89-92.
Part No: 18-4841
|
|
|
|
Home -> Engine Systems -> Engine Parts
Fits most Mallory Y or YD and cylinder distributors with clockwise or counter clockwise rotations.
Part No: 18-5296-2D
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Exhaust, Manifolds
Replaces: 2846689 Fits: Chrysler Model 273, 318, 340 & 360 CID engines (1966-1986) Use with: Manifold: 18-1940. Riser Gasket: 18-2941 open or 18-0472 blocked.
Part No: 18-1945
|
|
|
|
Home -> Engine Systems -> Engine Parts->Sierra-Carburetor Kits
Sierra carb kits and gaskets for engine tune ups.
Part No: 18-7756
|
|
|