Top Sellers
5/16" BBB Chain, 1900lb. SWL, 7600lb. Breaking Strength, 1.2lb./ft., 550' Standard Pack from ACCO CHAIN
Bulk Chain We stock a complete selection of I. standard chain from Acco to fit almost any windlass. chain vendors. When comparing Acco chain to other brands, be sure to ask if other models are “hot-dip. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. BBB is made of low-carbon steel, but has shorter, calibrated links that are designed to be compatible with many windlasses.
|
7/16" G40 Chain, 7200lb. SWL, 21,600lb. Breaking Strength, 2.05lb./ft., 300' Standard Pack from ACCO CHAIN
Hot-Dipped galvanized Grade 40 HT Acco anchor chain! An industry standard, hot-galvanized, high-tensile anchor chain combines both high tensile strength and is resistance to wear. Meets ISO standards . Calibrated to ensure the proper fit for your windlass. 7200 lbs.
|
|
|
1/8" Single Braid, 2300lb. Breaking Strength, Green from SAMSON ROPE
The high-strength, low-stretch equivalent to wire rope with seven times less weight! Combined with flex-fatigue and service life durability, Amsteel 12-strand Dyneema SK-75 single braid can outlast wire rope and has none of the handling and safety issues associated with wire. Stretch: 0. 70% at 20% of breaking strength. Best Use: Cascade systems, replacements for wire halyards, tapered sheets, backstays, runners, checkstays and strong ultralight rigging . Construction: 12-strand single braid .
|
1/8" Endura 12 Dyneema Single Braid, 2,100lb. Breaking Strength from NEW ENGLAND ROPES
Extremely high strength-to-weight ratio! Excellent strength-to-weight ratio, ultra-low elongation, excellent flexibility and wet/dry strength retention, torque-free, and it floats. Constructed from Dyneema SK-75, Endura 12 has a proprietary urethane coating for improved abrasion resistance. Best Use: Halyards, sheets, low-stretch control lines, guys, slings/hoisting ropes . Construction: 12-strand single braid . Core Fiber/Construction: Coated Dyneema SK-75 . 0% at 30% of breaking strength .
|
Black 3-Strand Nylon, 7/16'' Diameter, 5300lb. Breaking Strength from NEW ENGLAND ROPES
Dramatic resistance to damaging internal and external abrasion Combining premium nylon fiber with a high-quality marine coating and New England Rope’s superior manufacturing processes produces line that is five times more abrasion-resistant wet than any other nylon line. You can actually feel this critical performance advantage when you handle the supple line. Stretch: 16% at 15% of breaking strength. *Approximately 10–15% less strength than White Premium Three-Strand Nylon.
|
Mooring Chain - 3/8", Workload 4050lb from ACCO CHAIN
Long-link mooring chain accepts a shackle anywhere A low-carbon steel, general-purpose chain with a versatile, flexible long-link design for placing shackles anywhere along its length. Hot dip galvanized for outstanding corrosion protection.
|
Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
1/4" Sta-Set X Polyester Double Braid, 2,700lb. Breaking Strength from NEW ENGLAND ROPES
Patented all-polyester braid with parallel core construction and a filament/spun cover for improved handling and greater abrasion resistance. One third less stretch than Sta-Set at only a small price premium. In many applications, Sta-Set X can be used in lieu of expensive racing braids, especially when sized conservatively. Identified by two fine red tracers in the cover forming the characteristic “X”. Best Use: Cruising boat halyards, spinnaker sheets, guys . Stretch: 1.
|
Flip Lock Drain Plug 1" Stainless from SEAFIT DRAIN
Standard rubber and brass plug fits 1" transom drains on many production boats.
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
3mm Finish Line, 75' Spool, 650lb. Breaking Strength, Red from NEW ENGLAND ROPES
A great line for dinghy outhauls, vang systems, cunninghams, hiking strap lines, centerboard lines, topping lifts and halyardsSuper-strong prestretch doublebraid is made from a high-tenacity tension-set polyester with an 8-strand "nubby" cover and a continuous filament parallel core. Excellent for all-purpose control lines on dinghies and small catamarans. It's the highest-strength small diameter line at an affordable price. Construction: Double braid with parallel core. Stretch: 1.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
|
1, Breaking Strength, 400' Standard Pack from ACCO CHAIN, 1-1, 8-1
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
910
920
930
940
950
960
970
980
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1,000
1,001
1,002
1,003
1,004
1,005
1,006
1,007
1,008
1,009
1,010
1,011
1,012
1,013
1,014
1,015
1,020
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,200
1,260
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-72
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-72-C
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-74
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-76-C
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
Made of 6061-T6 anodized aluminum, this track features three stop pin holes between fastener holes. Holes at 1-3/8" (34mm) intervals allow sailors to fine-tune sails with three-times the adjustment of normal track. Also works well with reefing blocks and spinnaker mast eyes. The concave shaped riser fits most spar sections and allows for proper sealant bedding on flat surfaces. Mounting holes on 4" centers.
Part No: 40-78
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Standard T-Track
TRACK-T 1. 25 In. X10 BK|TRACK-T 1. 25 In.
Part No: 40-80
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->T-Track
Black anodized aluminum track with 4" mounting hole centers. Holes are spaced at 1-11/32" apart to allow finer adjustments to sail trim.
Part No: 40-82
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
Ideal for sail or powerboats, the Rotating Davits incorporate a fixed upper block welded as a structural component of the arm to multiply davit strength and prevent twisted lifting lines. per pair with a 9:1 mechanical advantage. Fabricated from 1" (25mm) 316 tubular polished stainless steel, these davits install to any stern rail and deck or to the transom. The upper mount is a clamshell that attaches to either a stern rail or a vertical surface. The davits rotate in the clamshell.
Part No: 400
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Spark Plugs
High-quality plugs with all the features that make Champion the industry’s leader. Triple-coated shell for excellent corrosion resistance. Triple seal assembly that’s the strongest in the industry. Precision rolled threads that conform to all manufacturers’ specs. * Q and R type plugs only. Some plugs have been redesigned to accommodate the different heat ranges required for reformulated fuel. Before you order a spark plug, be sure to consult the manufacturer’s most current reference guide.
Part No: 400
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Mooring Anchors->Pyramid Mooring Anchors
Designed to penetrate the bottom and prevent dragging The Dor-Mor pyramid mooring anchor rapidly penetrates the bottom due to the high-point loading of its compact size and shape. The large surface area of the pyramid shape has a high suction effect which increases the deeper the anchor sets. Short shank allows mooring in more shallow water with less chain wrap-up and potential hull damage.
Part No: 400 PYRAMID
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Accessory for mounting Lopolight on Windex masthead.
Part No: 400-008
|
|
|
|
Home -> Safety -> First Aid & Medical -> Medical Items
Dr. Eric A. Weiss, MD, and Dr. Michael Jacobs, MD. This boating medical guide emphasizes prevention and treatment of illnesses and injuries, with topics like CPR, wound management, submersion injuries and dive medicine.
Part No: 4000-1502
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
Reactor - For Urethane 4Ga Base - MUST order 1 gallon with Urethane Base.
Part No: 4000-GR
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Series 40 Navigation Lights
For powerboats and sailboats to 65'7" (20m). Screens are brushed stainless steel. Lights with Q-fit base can be removed without tools for easy servicing. *Tri-Color lights are for boats under sail only. **Strobes are considered distress signals in inland waters, and are illegal in offshore waters. ***Entire assembly can be removed without tools for trailering or storage. Mounting Hardware: 2-3 screws (sold separately) . 84A; 25W: 2A . Wiring Provisions: 5" wire pigtail .
Part No: 40000-7
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Kit includes 54 natural nylon clamps with IDs from 1/8"–1/2" in a snap-lid storage box.
Part No: 400000
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings
PAD EYE measures 2 2/3 inch x 2 inch with a 1 5/8 inch I. D.
Part No: 400001
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars->Twist-Lock Pole Repair Kits
Contains all parts to recondition twist-lock telescoping poles, and complete instructions.
Part No: 400008
|
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Twist-Lock Pole Repair Kits
Contains all parts to recondition twist-lock telescoping poles, and complete instructions.
Part No: 400009
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Lens for Aqua-Signal Series 40 Navigation Lights
Lens for Aqua-Signal Series 40 Navigation Lights.
Part No: 40001-1
|
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->Twist-Lock Pole Repair Kits
Contains all parts to recondition twist-lock telescoping poles, and complete instructions.
Part No: 400010
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Heaters
The large surface area of the 7/8" heat exchanger heats water fast and built-in 5/8" hose barbs make plumbing to engine coolant easy. They come complete with ignition-protected controls and high-pressure valves and include a remote, resettable, high-temperature limiter which resets simply by turning the power off then on again. The optional Temperature Control Valve regulates coolant flow through the exchanger to maintain potable water temperature at a safe 140°F.
Part No: 40002
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage -> Containers, Boxes, Bins
Collapsible Storage! Store it flat. Pop it open to use as a tote-basket. Ideal for space-conscious cruisers. Made of tough polypropylene. 20 3/4"L x 13 1/4"W x 10 3/4"H open. 2 3/4"H when folded. Baskets interlock when stacked.
Part No: 40003
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Heavy-Duty 1600, 2200 & 4000 GPH Pumps
Designed to meet and exceed the tough demands of commercial and recreational duty, these pumps feature a 12-pole motor with double ball bearings for extended service life. 2200 and 4000 GPH models incorporate a mechanical seal design that eliminates shaft wear. Outlet port check valve included for optional use. Features: Double ball-bearing motors for extended service life . Type: Submersible centrifugal electric bilge pump . Port Sizes: 1-1/8"–2" . Built-In Switch: No .
Part No: 40004
|
|
|
|
Home -> Electrical -> Interior Lighting -> Chart Lights
This 10W Halogen light provides plenty of light for nighttime navigation and features a 7-1/2" flexible neck so you can focus light anywhere you need it. Light Style: Incandescent Chart Light . Volts: 12V DC . Fixture Material: Titanium Nitride-coated stainless steel . Fixture Dimensions: Base: 1" x 2", Shade 1-7/16" dia. . Mounting Hardware Included/Required: #6 RHMS (included) . Lens Material/Description: Clear glass . Replacement Bulb: Model 309120 .
Part No: 400062
|
|
|
|
Home -> Seating & Covers -> Seating -> Helm & Fishing Seats
This non-folding seat is one of our most comfortable. It features arm rests and thick foam padding. Supports are anodized aluminum, the vinyl is UV-resistant and wood frame is sealed to prevent water damage. White . 2"H x 27"W x 22"D . Accepts any standard swivel/slide for 2-7/8" dia. pedestals. This Item will not be shipped to P. O.
Part No: 4000ARNS-204
|
|
|
|
Home -> Electrical -> Batteries & Accessories
Protect against accidental short circuits and reduce corrosion. Elastic PVC allows crimped terminals to pass through the opening. For batteries with integral marine terminals only. One pair, red and black.
Part No: 4001
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Proof Coil Anchor Chain
Bulk Chain We stock a complete selection of I. S. O. All Acco chain is hot-dip galvanized, which is superior to the zinc electroplating used by most other major U. chain vendors. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. Proof Coil (PC) is made of low-carbon steel and designed for ordinary marine applications, but not for use in most windlasses due to its long links.
Part No: 4001-40432
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Proof Coil Anchor Chain
Bulk Chain We stock a complete selection of I. S. O. All Acco chain is hot-dip galvanized, which is superior to the zinc electroplating used by most other major U. chain vendors. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. Proof Coil (PC) is made of low-carbon steel and designed for ordinary marine applications, but not for use in most windlasses due to its long links.
Part No: 4001-40502
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Proof Coil Anchor Chain
Bulk Chain We stock a complete selection of I. S. O. All Acco chain is hot-dip galvanized, which is superior to the zinc electroplating used by most other major U. chain vendors. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. Proof Coil (PC) is made of low-carbon steel and designed for ordinary marine applications, but not for use in most windlasses due to its long links.
Part No: 4001-40602
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Proof Coil Anchor Chain
Bulk Chain We stock a complete selection of I. S. O. All Acco chain is hot-dip galvanized, which is superior to the zinc electroplating used by most other major U. chain vendors. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. Proof Coil (PC) is made of low-carbon steel and designed for ordinary marine applications, but not for use in most windlasses due to its long links.
Part No: 4001-40802
|
|
|
