Top Sellers
Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
|
Oval Deck Pipe from SEAFIT
Accepts line, thimble, shackle and chain to 3/8". Hook under cover holds chain and cover in place. Material: Chromed-plated bronze . Flange: 6. 25" x 4. 5" . I. D. : 4-3/6"L x 2-3/8"W .
|
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
|
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
5"-6" Bonnet Set from WMH TOOL GROUP
For final buff out, use the wool polishing bonnet included in this Seven Piece Bonnet Set which includes four applicators, two terry cloth, one wool and one microfiber polishing bonnet.
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Mount on doors, bulkheads, in the cockpit and on hatch boards. Helps to eliminate mildew. . Pre-drilled for six #8 screws. . Mfr. 's lifetime limited warranty. . Ship 0. 5 lbs.
|
ARS-5 Advanced Regulator from BALMAR
Simply select one of five preset program choices based on battery type, and the belt size setting that matches your alternator’s drive belt width and alternator output rating. Battery settings include standard and deep-cycle flooded, gel, AGM, and Optima programs. When used with MC-TS-A and MC-TS-B alternator and battery temperature sensors, the ARS-5 ensures even greater charging performance, as well as critical protection for your alternator and batteries. Controls a single alternator only.
|
Deluxe Windshield Washer Kit from AFI
Install your own windshield washer systemFits new or existing AFI Deluxe wiper arm and blade sets, with all the parts to outfit two wiper arms. The kit includes a 3 liter water tank with mounting bracket (8. 5"H x 7"W x 4. 5"D), 12V pump motor and 16' below deck clear tubing, 6' above deck black tubing, clips and sprayer fittings. You supply wiring, an in-line 3A fuse and On-Off momentary switch.
|
Small Boat Clevis Pin Kit from JOHNSON, C.S.
Assorted sizes of stainless-steel clevis and cotter pins. Small Boat kit contains 46 pieces ranging from 3/16"–5/16".
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
|
from REVERE SUPPLY CO INC, 5, 5", Container, 16-Person, 6-Person, 4-Person
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
950
960
970
980
990
1,000
1,010
1,020
1,030
1,037
1,038
1,039
1,040
1,041
1,042
1,043
1,044
1,045
1,046
1,047
1,048
1,049
1,050
1,051
1,052
1,053
1,054
1,055
1,056
1,057
1,058
1,059
1,060
1,061
1,062
1,063
1,064
1,065
1,066
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,200
1,260
|
|
|
Home -> Ventilation -> Dehumidifiers, Air Purifiers->GoldenRod® Dehumidifiers
Proven effective by many satisfied boaters over the years, this is a great way to stop mold, mildew and dampness in your cabin and compartments. Safe from fire danger, no moving parts to wear out and no chemicals to replace.
Part No: 5-24
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Equiplite Non Swivelling Connector
Non-Swiveling Connectors features a protective locking Velcro strap An anodized Hi-tensile Aluminum bobbin with a replaceable loop fitted in the center. Protective locking Velcro strap .
Part No: 5-3NS
|
|
|
|
Home -> Anchor & Docking -> Anchors->Rope/Chain Anchor Rode Packages for Windlasses
Now you can get a rode package customized for the rope/chain gypsy on your windlass without the customized price! Packages include Acco High-Test chain and West Marine's Premium Three-Strand Anchor Line, joined with a strong, low-profile rope-to-chain splice.
Part No: 5/16HT-150-9/16
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Anchor & Rode Packages->Rope/Chain Anchor Rode Packages for Windlasses
Now you can get a rode package customized for the rope/chain gypsy on your windlass without the customized price! Packages include Acco High-Test chain and West Marine's Premium Three-Strand Anchor Line, joined with a strong, low-profile rope-to-chain splice.
Part No: 5/16HT-200-9/16
|
|
|
|
For Sound-Stop Foam sheets. Includes 12 1 5/8”L aluminum hanger pins, 12 2”sq. washers, and 12 1 1/2” dia.
Part No: 5/8 ALUMINUM IN
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs->New York & New England Region
Printed on both sides, these charts save you money! And because they are printed on synthetic paper, they are impervious to water, fresh or salt, so you can use them on deck in rain or spray. Convenient size—25"H x 38"W—makes them easy to fold and store. Used by the Coast Guard and the Navy, these charts are updated regularly and include Loran and GPS coordinates on most charts. Special editions for fishing and diving . Exact positions for wrecks and reefs .
Part No: 50
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrub Brush Kits, Accessories->Deck Brushes
Select from a wide variety of brushes to meet your washdown needsAll brushes feature a hardwood base, premium bristles, wrap-around safety bumper and the Shur-Lok quick-release adapter. The 900 Series brushes have flared bristles and an angled head design. Special Application brushes are great for windows, hulls, wheels and other hard to reach places. Extra-soft, soft, medium and stiff bristle grades.
Part No: 50
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs->Alaska Coast Print-on-Demand Charts
Print on Demand Nautical ChartsAccurate and up-to-date, charts include latest notice to mariners corrections, NIMA and NOAA's safety updates. . Charts are printed after your order is placed, ensuring that you receive the most up-to-date information. . Approved by NOAA, meets USCG carriage requirements, SOLAS compliant and a replacement for traditional NOAA paper charts. . Distinctive graphics and vibrant colors provide easy readability under varying light conditions.
Part No: 50 POD
|
|
|
|
Fishing->Fishing Accessories->Fishing Line->Spectra Micro Braid
Power Pro Spectra Micro Braid Green Braid .
Part No: 50-0150-G
|
|
|
|
Power Pro Spectra Hi-Visibility Braid made from ultra strong braided Spectra fiber.
Part No: 50-0150-Y
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->OceanMaster™ Life Rafts
Revere's OceanMaster liferafts are renowned for their uncompromising quality and design sophistication. Meeting the needs of all types of commercial craft, the OceanMaster range comprises of two different models: standard throw-over and davit-launched. Every raft comes packed in a weatherproof container to keep the raft drier and better protected for longer service life. Far more durable than rubber-based fabrics, the reduced need for repairs results in considerable savings in servicing costs.
Part No: 50-R/R-10M-A
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->OceanMaster™ Life Rafts
Revere's OceanMaster liferafts are renowned for their uncompromising quality and design sophistication. Meeting the needs of all types of commercial craft, the OceanMaster range comprises of two different models: standard throw-over and davit-launched. Every raft comes packed in a weatherproof container to keep the raft drier and better protected for longer service life. Far more durable than rubber-based fabrics, the reduced need for repairs results in considerable savings in servicing costs.
Part No: 50-R/R-12M-A
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->OceanMaster™ Life Rafts
Revere's OceanMaster liferafts are renowned for their uncompromising quality and design sophistication. Meeting the needs of all types of commercial craft, the OceanMaster range comprises of two different models: standard throw-over and davit-launched. Every raft comes packed in a weatherproof container to keep the raft drier and better protected for longer service life. Far more durable than rubber-based fabrics, the reduced need for repairs results in considerable savings in servicing costs.
Part No: 50-R/R-16M-A
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival -> Liferafts->OceanMaster™ Life Rafts
Revere's OceanMaster liferafts are renowned for their uncompromising quality and design sophistication. Meeting the needs of all types of commercial craft, the OceanMaster range comprises of two different models: standard throw-over and davit-launched. Every raft comes packed in a weatherproof container to keep the raft drier and better protected for longer service life. Far more durable than rubber-based fabrics, the reduced need for repairs results in considerable savings in servicing costs.
Part No: 50-R/R-20M-A
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->OceanMaster™ Life Rafts
Revere's OceanMaster liferafts are renowned for their uncompromising quality and design sophistication. Meeting the needs of all types of commercial craft, the OceanMaster range comprises of two different models: standard throw-over and davit-launched. Every raft comes packed in a weatherproof container to keep the raft drier and better protected for longer service life. Far more durable than rubber-based fabrics, the reduced need for repairs results in considerable savings in servicing costs.
Part No: 50-R/R-25M-A
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->SeaMaster™ Life Raft
USCG Approved Commercial-Quality Liferaft Revere's SeaMaster offers double buoyancy chambers manufactured from a specially formulated polyurethane (PU) proofed nylon fabric. This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. A lightweight, waterproof, durable valise is available for all sizes of SeaMaster liferafts. Valises are made of a high-visibility material. When packed, the valise design and shape make it easy to launch the raft overboard.
Part No: 50-R/R-4M-C-L
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->SeaMaster™ Life Raft
USCG Approved Commercial-Quality Liferaft Revere's SeaMaster offers double buoyancy chambers manufactured from a specially formulated polyurethane (PU) proofed nylon fabric. This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. A lightweight, waterproof, durable valise is available for all sizes of SeaMaster liferafts. Valises are made of a high-visibility material. When packed, the valise design and shape make it easy to launch the raft overboard.
Part No: 50-R/R-4M-C-V
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->ShoreMaster™ IBA Life Raft
This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. Welded seams (significantly stronger than glued seams) give the raft an extremely rugged construction. All 8-man ShoreMaster liferafts include a boarding ladder. A lightweight, waterproof, durable valise is available for all sizes of ShoreMaster liferafts. Valises are made of a high visibility material. A space saving low profile fiberglass container is available for all ShoreMaster liferafts.
Part No: 50-R/R-4M-IBA-L
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->ShoreMaster™ IBA Life Raft
This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. Welded seams (significantly stronger than glued seams) give the raft an extremely rugged construction. All 8-man ShoreMaster liferafts include a boarding ladder. A lightweight, waterproof, durable valise is available for all sizes of ShoreMaster liferafts. Valises are made of a high visibility material. A space saving low profile fiberglass container is available for all ShoreMaster liferafts.
Part No: 50-R/R-4M-IBA-V
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->OceanMaster™ Life Rafts
Revere's OceanMaster liferafts are renowned for their uncompromising quality and design sophistication. Meeting the needs of all types of commercial craft, the OceanMaster range comprises of two different models: standard throw-over and davit-launched. Every raft comes packed in a weatherproof container to keep the raft drier and better protected for longer service life. Far more durable than rubber-based fabrics, the reduced need for repairs results in considerable savings in servicing costs.
Part No: 50-R/R-4M-O
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->OceanMaster™ Life Rafts
Revere's OceanMaster liferafts are renowned for their uncompromising quality and design sophistication. Meeting the needs of all types of commercial craft, the OceanMaster range comprises of two different models: standard throw-over and davit-launched. Every raft comes packed in a weatherproof container to keep the raft drier and better protected for longer service life. Far more durable than rubber-based fabrics, the reduced need for repairs results in considerable savings in servicing costs.
Part No: 50-R/R-6M-A-L
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->OceanMaster™ Life Rafts
Revere's OceanMaster liferafts are renowned for their uncompromising quality and design sophistication. Meeting the needs of all types of commercial craft, the OceanMaster range comprises of two different models: standard throw-over and davit-launched. Every raft comes packed in a weatherproof container to keep the raft drier and better protected for longer service life. Far more durable than rubber-based fabrics, the reduced need for repairs results in considerable savings in servicing costs.
Part No: 50-R/R-6M-A-R
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->SeaMaster™ Life Raft
USCG Approved Commercial-Quality Liferaft Revere's SeaMaster offers double buoyancy chambers manufactured from a specially formulated polyurethane (PU) proofed nylon fabric. This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. A lightweight, waterproof, durable valise is available for all sizes of SeaMaster liferafts. Valises are made of a high-visibility material. When packed, the valise design and shape make it easy to launch the raft overboard.
Part No: 50-R/R-6M-C-L
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->SeaMaster™ Life Raft
USCG Approved Commercial-Quality Liferaft Revere's SeaMaster offers double buoyancy chambers manufactured from a specially formulated polyurethane (PU) proofed nylon fabric. This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. A lightweight, waterproof, durable valise is available for all sizes of SeaMaster liferafts. Valises are made of a high-visibility material. When packed, the valise design and shape make it easy to launch the raft overboard.
Part No: 50-R/R-6M-C-V
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->ShoreMaster™ IBA Life Raft
This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. Welded seams (significantly stronger than glued seams) give the raft an extremely rugged construction. All 8-man ShoreMaster liferafts include a boarding ladder. A lightweight, waterproof, durable valise is available for all sizes of ShoreMaster liferafts. Valises are made of a high visibility material. A space saving low profile fiberglass container is available for all ShoreMaster liferafts.
Part No: 50-R/R-6M-IBA-L
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->ShoreMaster™ IBA Life Raft
This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. Welded seams (significantly stronger than glued seams) give the raft an extremely rugged construction. All 8-man ShoreMaster liferafts include a boarding ladder. A lightweight, waterproof, durable valise is available for all sizes of ShoreMaster liferafts. Valises are made of a high visibility material. A space saving low profile fiberglass container is available for all ShoreMaster liferafts.
Part No: 50-R/R-6M-IBA-V
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->OceanMaster™ Life Rafts
Revere's OceanMaster liferafts are renowned for their uncompromising quality and design sophistication. Meeting the needs of all types of commercial craft, the OceanMaster range comprises of two different models: standard throw-over and davit-launched. Every raft comes packed in a weatherproof container to keep the raft drier and better protected for longer service life. Far more durable than rubber-based fabrics, the reduced need for repairs results in considerable savings in servicing costs.
Part No: 50-R/R-8M-A-L
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->OceanMaster™ Life Rafts
Revere's OceanMaster liferafts are renowned for their uncompromising quality and design sophistication. Meeting the needs of all types of commercial craft, the OceanMaster range comprises of two different models: standard throw-over and davit-launched. Every raft comes packed in a weatherproof container to keep the raft drier and better protected for longer service life. Far more durable than rubber-based fabrics, the reduced need for repairs results in considerable savings in servicing costs.
Part No: 50-R/R-8M-A-R
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->SeaMaster™ Life Raft
USCG Approved Commercial-Quality Liferaft Revere's SeaMaster offers double buoyancy chambers manufactured from a specially formulated polyurethane (PU) proofed nylon fabric. This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. A lightweight, waterproof, durable valise is available for all sizes of SeaMaster liferafts. Valises are made of a high-visibility material. When packed, the valise design and shape make it easy to launch the raft overboard.
Part No: 50-R/R-8M-C-L
|
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival->SeaMaster™ Life Raft
USCG Approved Commercial-Quality Liferaft Revere's SeaMaster offers double buoyancy chambers manufactured from a specially formulated polyurethane (PU) proofed nylon fabric. This fabric is highly resistant to abrasion and impervious to corrosion in the marine environment. A lightweight, waterproof, durable valise is available for all sizes of SeaMaster liferafts. Valises are made of a high-visibility material. When packed, the valise design and shape make it easy to launch the raft overboard.
Part No: 50-R/R-8M-C-V
|
|
|
