HS Shaft Seal - 2" x 3 1/2" x 8 1/8" from PSS SHAFT SEAL
.

Jervis Inlet/Desolation Sound Chart Book from CANADIAN HYDRO
Jervis Inlet, Desolation Sound and approaches Atlas produced by the Canadian Hydrographic Service. This informative spiral bound 16"x23" kit contains pages of general information, facilities guides and distance tables, weather pilot charts and temps, emergency information, and a gazetteer with hundreds of GPS wants PLUS all the CHS charts for Jervis Inlet and Desolation Sound. Large-scale insets of the most frequented small craft havens. Important geographic reference points.

Canadian Gulf Islands Chartbook, #3313 from CANADIAN HYDRO
The Gulf Islands Atlas is a navigational atlas and cruising guide specifically designed for recreational boaters in British Columbia's popular Gulf Islands. It features 24 up-to-date navigation chartlets of the Strait of Georgia, the most popular area for B. Printed in a large-size booklet format 23" by 16" with spiral binding. Enclosed in a weather-resistant plastic zip-lock bag. Photographs of the approaches to harbours and channels. Important geographic reference points.

PV7D Controller, 1-1/2"W x 2-7/8"H x 1"D from FLEXCHARGE
Ultra -High Efficiency Solar & Wind Charge Controllers Waterproof and better than 99. 5% efficient with charging currents of 0. 5 to 25 amps, a 2-15% gain over competitors. Handles spikes up to 1,500V/A, so your controller won’t be damaged by surges. 7 amp PV7D is a cost effective shunting regulator for smaller 6V, 12V or 24V solar only applications, expandable to handle charging currents from 30 to 500A. Reverse polarity protected and fully sealed for use in high humidity environments.

Mount-Seat Spider 2-7/8 Alum from GARELICK
Choose either a swivel spider only or the Millennium swivel/slide combo. Both offer positive spring-loaded quick-lock lever for immediate engagement as well as secondary twist control handle for selective rotation and stable, wobble-free support. The Millennium offers smooth positive lock action slide with 6" fore and aft travel, and a 360° swiveling spider.

Bow Universal Anchor Roller, 18" Length, 3-1/2" Width; 3/8" (3) Fasteners from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.

Medium Fairlead Anchor Roller, 11" Length, 2-1/8" Width; 3/8" (3) Fasteners from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.

Surface-Mount Angler Compass, 3-5/8" dia. x 2-7/8"H from RITCHIE NAVIGATION
Stylish and accurate, these low-profile, 2-3/4" apparent direct-reading compasses with distinctive RitchieAngler graphics feature no-glare gray finishes and high-visibility blue dials to point the way to your favorite fishing spot. The bracket mount is fully adjustable with thumbscrews. Both feature internal marine night lighting, built-in compensators, movable sun shields, pushbutton removal for quick storage and security. Apparent Card Dia. : 2-3/4" . Card Type: Direct .

T-50 Monel Staples - 3/8' from ARROW FASTENER CO IN
Monel is used extensively for much of the finished hardware in the Marine trade. It is also used extensively in areas that are exposed to salt and other corrosive air. Monel is superior to stainless steel in that stainless steel will oxidize, rust and corrode when exposed to certain corrosive air. Leg length: 3/8" (10mm). Crown width: 3/8" (10mm). Pack Size: 1,000. 100% corrosion resistant staple. Ideal for Marine or outdoor use.

Portlight, 4-3/4" x 15-5/8" I.D. Opening, 7-5/8" x 18-1/2" Cutout, 8-1/2" x 19-3/8" O.D. from BOMAR
Style, functionality and simple installation are all features designed into the Flagship Series portlight. The elliptical portlight’s sleek design offers a large viewing area through a smoked 3/8" tinted acrylic lens. The exterior is beveled so it doesn’t collect water, allowing installation in angled cabin sides. Patented design is standard equipment on many boats including Sea Ray, Silverton, Carver, Pursuit and Four Winns. Included Accessories: Trim ring and removable screen .

5° Base, 2 Contacts, Accepts CAM Collar, Rectangular Chromed Brass/Plastic Base, 3-1/2" x 1-1/2" from PERKO
Bases for Perko Pole Lights are now sold separately to give you more choices for customizing lights for your specific needs. Bases are selected to match the designed rake angle of the pole light and the number of pins (electrical contacts) necessary. All-round pole lights use 2 pins, and removable combination masthead and some plug-in bi-color pole lights with an accessory light require bases with 3 pin contacts. Collars secure the pole light into the base.

Recessed Louvered 8-Slot Vent from WEST MARINE
Flush mounting vent reduces damage to the vent and lines that may rub across the surface. Constructed of 316 stainless steel. Type: Louvered . Material: 316 stainless steel . Dimensions: 2-7/8"W x 16-3/8"L. Cutout Size: 1-7/8"W x 15-1/4"L . Fasteners: Six #6 RH fasteners .

5° Base, 2 Contacts, Accepts Large Threaded Collar, Teardrop Chromed Brass/Plastic Base, 3-1/2" x 2" from PERKO
Bases for Perko Pole Lights are now sold separately to give you more choices for customizing lights for your specific needs. Bases are selected to match the designed rake angle of the pole light and the number of pins (electrical contacts) necessary. All-round pole lights use 2 pins, and removable combination masthead and some plug-in bi-color pole lights with an accessory light require bases with 3 pin contacts. Collars secure the pole light into the base.

0° Base, 2 Contacts, Accepts CAM Collar, Rectangular Chromed Brass/Plastic Base, 3-1/2" x 1-1/2" from PERKO
Bases for Perko Pole Lights are now sold separately to give you more choices for customizing lights for your specific needs. Bases are selected to match the designed rake angle of the pole light and the number of pins (electrical contacts) necessary. All-round pole lights use 2 pins, and removable combination masthead and some plug-in bi-color pole lights with an accessory light require bases with 3 pin contacts. Collars secure the pole light into the base.

Winch Maintenance Pack from LEWMAR
Spares Kit, Single-Speed Winches For all single-speed winches less than 11 years old, includes 4 pawls, 4 pawl springs, 4 circlips. . Spares Kit, Two-Speed Winches For all two-speed and self-tailing winches to 16ST-66ST. Includes 2 circlips, 8 pawls, 12 pawl springs, 3 keys, 8 gear spindle sleeves, 2 collets . Spares Kit, Three-Speed Winches For all three-speed nonself-tailing winches to 65. Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings .