Top Sellers
304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
|
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
316 Stainless-Steel Hose Clamp, 7/16" to 11/16", SAE Size 3 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
|
Cabinet Handle, Stainless Steel Bar 13" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Stainless-Steel Full-Flow Ball Valve, 1/4" Size (NPT) from GROCO
Components include 316 stainless-steel body, 304 stainless-steel handle, PTFE seals and seats.
|
Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
|
Stainless-Steel Rub Rail, End, 1"H x 12"L; Requires #8 Screws from TACO PRODUCTS
Fits a wide variety of vinyl profiles Hollow back (marine grade type 304) has concave back to fit rigid vinyl rub rails and provide added protection and chrome-like accent around entire boat. Most widely used stainless-steel inserts fit the largest variety of vinyl profiles on the market. Solid back stainless-steel rub rail provides premium heavy-duty protection and a polished finish for your boat.
|
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
|
Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
|
|
1"W x 8"L Tang from SCHAEFER
High-quality stainless steel tumbled and polished.
|
|
1, 2-1, 4" from LEWMAR, Length 1-1, Stainless Steel from ATTWOOD
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,110
1,114
1,115
1,116
1,117
1,118
1,119
1,120
1,121
1,122
1,123
1,124
1,125
1,126
1,127
1,128
1,129
1,130
1,131
1,132
1,133
1,134
1,135
1,136
1,137
1,138
1,139
1,140
1,141
1,142
1,143
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,220
1,260
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses->Spare Rope/Chain Flemings
The Fleming rope is a special rope management system that allows for sure handling of anchor line.
Part No: 66000033
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers
Pro Series Stripper Kit.
Part No: 66000096
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers
Pro Series Clutch Nut Lever.
Part No: 66000099
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Windlass Gypsies
Windlass Gypsies.
Part No: 66000110
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Windlass Control Arm Kits
Control Arm Kits for various Lewmar windlasses.
Part No: 66000600
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers
V700 Fall Safe Kit.
Part No: 66000607
|
|
|
|
Home -> Safety -> Life Jackets -> Recreational Life Jackets->Freestyle™ Life Vests
PFD-Freestyl XXL Cbn/Yel|PFD-Freestyl XXL Cbn/Yel.
Part No: 6600C/Y-06-WMP
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Flush-Mount 316 Stainless Fuel Vents
Corrosion-resistant 316 stainless steel flush vents feature a smooth exterior with no protruding cap to cause damage, or be damaged by hull bumps and scrapes. Caps unscrew with allen wrench for easy cleaning of filter or for pressure testing the entire system. For 5/8" ID fuel hose. Max. hull thickness 7/8".
Part No: 66031-3
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Flush-Mount 316 Stainless Fuel Vents
Corrosion-resistant 316 stainless steel flush vents feature a smooth exterior with no protruding cap to cause damage, or be damaged by hull bumps and scrapes. Caps unscrew with allen wrench for easy cleaning of filter or for pressure testing the entire system. For 5/8" ID fuel hose. Max. hull thickness 7/8".
Part No: 66032-3
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Gasoline Fuel Filter/Water Separators
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
Part No: 660R-RAC-02
|
|
|
|
Home -> Interior, Flags & Gifts -> Gifts
Weems & Plath 661 Brass Compass Chart Weight A liquid filled compass encircled in a forged brass ring. Each chart weight is brushed and lacquered brass that will not tarnish or show fingerprints. The bottom of each weight is felt lined to protect the surface it rests on and to prevent slipping. The weights can be customized by imprinting or engraving. Each chart weight comes gift-boxed suitable for presentation purposes.
Part No: 661
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Sheet Metal Screws - Truss Head - Bulk Packs
.
Part No: 661
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->SS Screw Pin Anchor Shackles
To prevent accidental opening, always seize (safety wire) the shackle pin.
Part No: 6616S
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->SS Screw Pin Anchor Shackles
To prevent accidental opening, always seize (safety wire) the shackle pin.
Part No: 6617S
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->SS Screw Pin Anchor Shackles
To prevent accidental opening, always seize (safety wire) the shackle pin.
Part No: 6618S
|
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->SS Screw Pin Anchor Shackles
To prevent accidental opening, always seize (safety wire) the shackle pin.
Part No: 6619S
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Sheet Metal Screws - Truss Head - Bulk Packs
.
Part No: 662
|
|
|
|
**98-05SUGRSND TAN 2+4 DC JT P.
Part No: 66218UB
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Anchor Line Accessories
Two-piece construction provides a finished appearance for cockpit and gunwale installation.
Part No: 66224-1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid
Ties topcoat to undercoat, regardless of compatibilityGeneral purpose chlorinated rubber used as a primer on metal surfaces and as a tie coat between different types of coatings. Can be used above or below the waterline. Compatible with all antifouling and topside paints. Semi-flat burnt orange color. Brush, roll or spray. Quart kit. Primary Usage: Metal surfaces, underwater running gear, trim tabs . Formulation: General-purpose chlorinated rubber primer . Drying Time: Second coat: 2 hrs.
Part No: 6627-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Personal Safety->5000- and 6000-Series Replacement Parts
Ensure the effectiveness of your respirator by replacing cartridges and filters as neededInclude 5P71 (P95) Particulate Pre Filters, 6001 Organic Vapor Cartridges, R6022 Kit, and R2091 Speciality Filters. R2091(P100) particulate filters may be used with 6000-Series Respirators for welding, torch cutting, and abatement applications and for OSHA substance-specific particulate exposure. Provide at least 99. 97% filter efficiency against solid and liquid particles, including oils.
Part No: 66278
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Sheet Metal Screws - Truss Head - Bulk Packs
.
Part No: 663
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->One-Mile Sidelights
Designed to mount on the foredeck or any flat surface of powerboats to 12m. Lights have 1nm visibility. Polycarbonate lenses. Accept #90 (7. 5W) lamps. Stainless model uses an 8W lamp. Bases are predrilled with two countersunk holes. Die-cast Zamak model has a Perma-Plate chrome finish. Volts: 12V . Draw: 0. 62A .
Part No: 66318-7
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->One-Mile Sidelights
Designed to mount on the foredeck or any flat surface of powerboats to 12m. Lights have 1nm visibility. Polycarbonate lenses. Accept #90 (7. 5W) lamps. Stainless model uses an 8W lamp. Bases are predrilled with two countersunk holes. Die-cast Zamak model has a Perma-Plate chrome finish. Volts: 12V . Draw: 0. 62A .
Part No: 66319G7
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->One-Mile Sidelights
Designed to mount on the foredeck or any flat surface of powerboats to 12m. Lights have 1nm visibility. Polycarbonate lenses. Accept #90 (7. 5W) lamps. Stainless model uses an 8W lamp. Bases are predrilled with two countersunk holes. Die-cast Zamak model has a Perma-Plate chrome finish. Volts: 12V . Draw: 0. 62A .
Part No: 66319R7
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders->Stainless Steel Flush Mount Rod Holders, 0-30°
Polished 2" diameter 316 grade stainless steel for corrosion resistance UV resistant polymer liner UV resistant cover cap/gasket closes tube when not in use 2" Diameter Includes Gap-Gasket.
Part No: 66362-7
|
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders->Stainless Steel Flush Mount Rod Holders, 0-30°
Polished 2" diameter 316 grade stainless steel for corrosion resistance UV resistant polymer liner UV resistant cover cap/gasket closes tube when not in use 2" Diameter Includes Gap-Gasket.
Part No: 66363-7
|
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Rod Holders->Stainless Steel Flush Mount Rod Holders, 0-30°
Polished 2" diameter 316 grade stainless steel for corrosion resistance UV resistant polymer liner UV resistant cover cap/gasket closes tube when not in use 2" Diameter Includes Gap-Gasket.
Part No: 66364-7
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights
Waterproof 304 stainless steel 12pt white light for vertical transoms. 2-mile, 135° light provides visibility for craft up to 164' (50m). Includes 7. 5W bulb. Meets Coast Guard requirements for boats built before Nov. 2003. Case Material: 304 Stainless steel, plastic body . Case Dimensions: 4-11/16"L x 2-11/16"H x 2"D . Cutout: 2"H. Mounting Hardware: Two #10 screws (included) . Volts: 12V .
Part No: 66382-7
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Tapping Screws - Phillips Truss Head - Bulk
Type 18-8 stainless steel.
Part No: 664
|
|
|
