Top Sellers
1/4" Aluminum Hose Barb, 1/4" Make Thread from MOELLER
Barb-Fuel 1/4Npt x 1/4 M Thrd|Barb-Fuel 1/4Npt x 1/4 M Thrd.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
|
|
Diamond Pad Eye 3-1/4" from SUNCOR
Diamond Pad Eyes. Heavy-Duty, one-piece precision casting.
|
Yamaha Outboard 1984-1996, 1-4 Cyl., V4, V6, 2-250 HP from SELOC PUBLICATIONS
Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. This repair manual covers all Yamaha outboard engines, 12-250 HP, 1-4 cylinder, V4, V6 models, 1990 to 2001. Every manual features: Easy-to-follow, step-by-step, illustrated procedures . Hundreds of exploded drawings, photographs and tables . Troubleshooting sections .
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
|
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
60mm Racing Fiddle Block with Becket & Cleat, 882lb. SWL, 12.4oz. from LEWMAR
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .
|
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
|
1, 1-1, 8" from SCHAEFER, Cleat, Dia 1, 4"H from SCHAEFER, 8"H from SCHAEFER
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,110
1,121
1,122
1,123
1,124
1,125
1,126
1,127
1,128
1,129
1,130
1,131
1,132
1,133
1,134
1,135
1,136
1,137
1,138
1,139
1,140
1,141
1,142
1,143
1,144
1,145
1,146
1,147
1,148
1,149
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,220
1,230
1,260
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.->Deck Fills
No more lost deck fill keys! Push-up tab eliminates the key. Patented mechanism locks tap in open and closed position. Knurled surface for positive grip. Sealing closure keeps out water or dirt. Flush to deck when locked closed. 3" Flange.
Part No: 6995CBLUE
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.->Deck Fills
No more lost deck fill keys! Push-up tab eliminates the key. Patented mechanism locks tap in open and closed position. Knurled surface for positive grip. Sealing closure keeps out water or dirt. Flush to deck when locked closed. 3" Flange.
Part No: 6996CBLUE
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Machine Bolts, Hex Head, Bulk Packs
Type 18-8 stainless steel.
Part No: 69C
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Personal Safety->6000 Series Dual-Cartridge Respirators
With replaceable organic vapor cartridgesEach Assembly consists of one Facepiece (Half or Full), one pair of 6001 Organic Vapor (OV) Cartridges, two pairs of 5P71 (P95) Particulate Pre-Filters and one pair of 501 Particulate Filter Retainers. Full Facepiece units also include two 6885 Full Facepiece Lens Covers. Please refer to the Respirator Parts and Filters chart for all parts. Primary Usage: Dust and organic vapor relief (When used with required cartridges). Approvals: NIOSH .
Part No: 69P71
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Thumbscrews
Type 18-8 stainless steel.
Part No: 6C
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Wide-Step Lifting Ladders
Heavy-duty aluminum dock ladder features extra wide steps for increased security under foot. The steps have slightly rounded edges so you feel comfortable and stable when climbing in and out of the water. Grooved surface offers traction, yet still remains kind to your feet. Standard style for permanent mounting on a dock or seawall. 665lb. max boarding capacity.
Part No: 6LLW
|
|
|
|
This series has been designed over the years to become the work horse in the industry. These nets are asked for by name more than any net made. All the things looked for in a net are in this series.
Part No: 6PM
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes -> Outboard/Outdrive Anodes
7-1190 Small Side Power zinc with SS washer.
Part No: 7-1190
|
|
|
|
Home -> Ventilation -> Dehumidifiers, Air Purifiers->GoldenRod® Dehumidifiers
Proven effective by many satisfied boaters over the years, this is a great way to stop mold, mildew and dampness in your cabin and compartments. Safe from fire danger, no moving parts to wear out and no chemicals to replace.
Part No: 7-36
|
|
|
|
Home -> Plumbing -> Fittings & Valves
Extra protection for your pump Extra measure of protection for cylindrical Rule pumps to 3700gph.
Part No: 70
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> North & Central America->Great Lakes Region
Printed on both sides, these charts save you money! And because they are printed on synthetic paper, they are impervious to water, fresh or salt, so you can use them on deck in rain or spray. Convenient size—25"H x 38"W—makes them easy to fold and store. Used by the Coast Guard and the Navy, these charts are updated regularly and include Loran and GPS coordinates on most charts. Special editions for fishing and diving . Exact positions for wrecks and reefs .
Part No: 70
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Mooring Anchors->Pyramid Mooring Anchors
Designed to penetrate the bottom and prevent dragging The Dor-Mor pyramid mooring anchor rapidly penetrates the bottom due to the high-point loading of its compact size and shape. The large surface area of the pyramid shape has a high suction effect which increases the deeper the anchor sets. Short shank allows mooring in more shallow water with less chain wrap-up and potential hull damage.
Part No: 70 PYRAMID
|
|
![6" Four-Hole Open-Base Cleat, 7/16" Max. Line Dia., four 1/4" FHMS, 1-1/4"H from SCHAEFER]( "6\" Four-Hole Open-Base Cleat, 7/16\" Max. Line Dia., four 1/4\" FHMS, 1-1/4\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-06
|
|
![8" Four-Hole Open-Base Cleat, 3/4" Max. Line Dia., four 5/16" FHMS, 1-1/2"H from SCHAEFER]( "8\" Four-Hole Open-Base Cleat, 3/4\" Max. Line Dia., four 5/16\" FHMS, 1-1/2\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-08
|
|
![10" Four-Hole Open-Base Cleat, 7/8" Max. Line Dia., four 3/8" FHMS, 1-7/8"H from SCHAEFER]( "10\" Four-Hole Open-Base Cleat, 7/8\" Max. Line Dia., four 3/8\" FHMS, 1-7/8\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-10
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Small Bronze Ball Valves with Brass Ball
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.
Part No: 70-101-10
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Small Bronze Ball Valves with Brass Ball
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.
Part No: 70-102-10
|
|
![4" Standard Closed-Base Cleat, 3/8" Max. Line Dia., two #10 FHMS, 1/2"H from SCHAEFER]( "4\" Standard Closed-Base Cleat, 3/8\" Max. Line Dia., two #10 FHMS, 1/2\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-14
|
|
![6" Standard Closed-Base Cleat, 5/8" Max. Line Dia., two 1/4" FHMS, 3/4"H from SCHAEFER]( "6\" Standard Closed-Base Cleat, 5/8\" Max. Line Dia., two 1/4\" FHMS, 3/4\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-16
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats
Computer-designed flare ensures easy line entry at various angles. Die-cast aluminum with Delrin ball bearings for smooth action. Available with or without fairleads. Safe Working Load: 300lb. . Handles lines 1/4" to 7/16" dia. . Requires two #10 flat head screws. 1-1/2" centers.
Part No: 70-17
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Sure-Grip Cam Cleats
Investment cast stainless jaws with flared tops allow lines to drop in without pulling. Hole spacing matches previous Schaefer cleats. Wire fairleads can be removed.
Part No: 70-28
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Cam and Clam Cleats->Sure-Grip Cam Cleats
Investment cast stainless jaws with flared tops allow lines to drop in without pulling. Hole spacing matches previous Schaefer cleats. Wire fairleads can be removed.
Part No: 70-38
|
|
|
|
Home -> Plumbing -> Fittings & Valves->3-Way Bronze Ball Valves
Use in place of a "T" fitting to switch between two tanks.
Part No: 70-603-10
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->3-Way Bronze Ball Valves
Use in place of a "T" fitting to switch between two tanks.
Part No: 70-604-10
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Rope Clutches->Midrail Cleats
Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1 1/4'' T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless. Strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position.
Part No: 70-74
|
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Midrail Cleats
Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1 1/4'' T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless. Strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position.
Part No: 70-75
|
|
![4" Jam Cleat Open-Base Cleat, 5/16" Max. Line Dia., two #10 FHMS, 5/8"H from SCHAEFER]( "4\" Jam Cleat Open-Base Cleat, 5/16\" Max. Line Dia., two #10 FHMS, 5/8\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-78
|
|
![5" Jam Cleat Open-Base Cleat, 3/8" Max. Line Dia., two #12 FHMS, 13/16"H from SCHAEFER]( "5\" Jam Cleat Open-Base Cleat, 3/8\" Max. Line Dia., two #12 FHMS, 13/16\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-79
|
|
![6" Jam Cleat Open-Base Cleat, 1/2" Max. Line Dia., two 1/4" FHMS, 1"H from SCHAEFER]( "6\" Jam Cleat Open-Base Cleat, 1/2\" Max. Line Dia., two 1/4\" FHMS, 1\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-80
|
|
![4" Standard Open-Base Cleat, 3/8" Max. Line Dia., two #10 FHMS, 3/4"H from SCHAEFER]( "4\" Standard Open-Base Cleat, 3/8\" Max. Line Dia., two #10 FHMS, 3/4\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-94
|
|
|
