Top Sellers
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
|
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
|
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.
|
Dock Box or Cooler Chocks from AFI
Using only plantation-grown teak, these fine accessories make life aboard more pleasant.
|
Folding Step from SEADOG
Handy when you need it, but out of the way when you don't! Projects just 13/16" when folded. Chrome-lated brass wtih a stainless steel spring.
|
Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
|
|
2" from HARKEN, from AWLGRIP, 8" from HARKEN, 4" from HARKEN
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,050
1,060
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,136
1,137
1,138
1,139
1,140
1,141
1,142
1,143
1,144
1,145
1,146
1,147
1,148
1,149
1,150
1,151
1,152
1,153
1,154
1,155
1,156
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,170
1,180
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Sailboat -> Rigging Products -> Wind Instruments->Lev-O-Gage Clinometers
The perfect device for attaining an optimum angle of heel. Black bodies with flex tubes and white engraved numerals and an easy-to-read scale.
Part No: 7301-C
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Super Gard™ Fenders
These fenders will stand up to anything and stand out in a crowd TaylorMade Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders can take the toughest abuse your boat can hand out. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life. Double molded black ends for extra strength.
Part No: 730128
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Super Gard™ Fenders
These fenders will stand up to anything and stand out in a crowd TaylorMade Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders can take the toughest abuse your boat can hand out. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life. Double molded black ends for extra strength.
Part No: 730520
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Super Gard™ Fenders
These fenders will stand up to anything and stand out in a crowd TaylorMade Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders can take the toughest abuse your boat can hand out. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life. Double molded black ends for extra strength.
Part No: 730622
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Chart Books->Atlantic Coast & Gulf Coast Chartbooks
Complete chart coverage, using two-color reproductions from the latest available government charts, on waterproof, synthetic pages. Formatted and spiral-bound, the 12" x 18" charts provide a convenient and economic cruising tool. GPS waypoint labels and Yeoman reference points on chart pages Cruising facility information and descriptions. Photos of harbors and points of interest Scale information in nautical miles and yards. Quick reference guides.
Part No: 7308
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Super Gard™ Fenders
These fenders will stand up to anything and stand out in a crowd TaylorMade Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders can take the toughest abuse your boat can hand out. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life. Double molded black ends for extra strength.
Part No: 730824
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses->Fixed-Length & Telescoping Handles
Sturdy triple-anodized handles quickly lock with all Shurhold itemsAll handles are hand-made of triple-anodized, heat-treated aluminum and quickly lock with all SHURHOLD items. Fixed-length style handles have standard grip. Two-piece, telescoping handle assemblies offer excellent versatility and feature the Shur-Lok system, which locks the handle at the desired length. Compatible with all Shurhold accessories. Shur-Loc system locks telescoping poles to desired length.
Part No: 730FG
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Episize™ Glass Tape
Episize™ Glass Tape Versatile WEST SYSTEM EpisizeTM 9-oz. woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion. #729 2" wide x 10' or 50 yard rolls. #731 3" wide x 50 yard roll. #732 4" wide x 10' or 50 yard rolls.
Part No: 731
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Cruising Furler Unit 1
A single-groove round foil withstands extreme reefing loads, letting you easily unfurl your headsail, furl and reef safely in a blow. The foils are easy to assemble with interlocking connectors (screws and adhesive included) built strong for years of torque-loading. The drum installs over your existing turnbuckle, adapting to a variety of rigging options. The Harken® toggle assembly accepts standard turnbuckles using swage, rod, Norseman or Sta-Lok terminals, or fits directly to a marine eye.
Part No: 7311.10 1/2.WM
|
|
|
|
|
Home -> Sailboat -> Headsail Furling->Cruising Furler Unit 1
A single-groove round foil withstands extreme reefing loads, letting you easily unfurl your headsail, furl and reef safely in a blow. The foils are easy to assemble with interlocking connectors (screws and adhesive included) built strong for years of torque-loading. The drum installs over your existing turnbuckle, adapting to a variety of rigging options. The Harken® toggle assembly accepts standard turnbuckles using swage, rod, Norseman or Sta-Lok terminals, or fits directly to a marine eye.
Part No: 7311.10 5/8
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->MKIV Unit 1 Furler Accessories
Connectors, extra extrusions and link plates for MKIV Furler Unit 1.
Part No: 7311.20 1/2
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->MKIV Unit 1 Furler Accessories
Connectors, extra extrusions and link plates for MKIV Furler Unit 1.
Part No: 7311.21 1/2
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->MKIV Unit 1 Furler Accessories
Connectors, extra extrusions and link plates for MKIV Furler Unit 1.
Part No: 7311.21 5/8
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Cruising Furler Unit 2
A single-groove round foil withstands extreme reefing loads, letting you easily unfurl your headsail, furl and reef safely in a blow. The foils are easy to assemble with interlocking connectors (screws and adhesive included) built strong for years of torque-loading. The drum installs over your existing turnbuckle, adapting to a variety of rigging options. The Harken® toggle assembly accepts standard turnbuckles using swage, rod, Norseman or Sta-Lok terminals, or fits directly to a marine eye.
Part No: 7312.10 3/4
|
|
|
|
|
Home -> Sailboat -> Headsail Furling->Cruising Furler Unit 2
A single-groove round foil withstands extreme reefing loads, letting you easily unfurl your headsail, furl and reef safely in a blow. The foils are easy to assemble with interlocking connectors (screws and adhesive included) built strong for years of torque-loading. The drum installs over your existing turnbuckle, adapting to a variety of rigging options. The Harken® toggle assembly accepts standard turnbuckles using swage, rod, Norseman or Sta-Lok terminals, or fits directly to a marine eye.
Part No: 7312.10 5/8.WM
|
|
|
|
|
Home -> Sailboat -> Headsail Furling->MKIV Unit 2 Furler Accessories
Connectors, extra extrusions and link plates for MKIV Furler Unit 2.
Part No: 7312.21 3/4
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->MKIV Unit 2 Furler Accessories
Connectors, extra extrusions and link plates for MKIV Furler Unit 2.
Part No: 7312.21 5/8
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Glass Tape
Episize™ Glass Tape Versatile WEST SYSTEM EpisizeTM 9-oz. woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion. #729 2" wide x 10' or 50 yard rolls. #731 3" wide x 50 yard roll. #732 4" wide x 10' or 50 yard rolls.
Part No: 732
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Glass Tape
Episize™ Glass Tape Versatile WEST SYSTEM EpisizeTM 9-oz. woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion. #729 2" wide x 10' or 50 yard rolls. #731 3" wide x 50 yard roll. #732 4" wide x 10' or 50 yard rolls.
Part No: 732-10
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->AwlCare Polymer Sealer
A non-abrasive, synthetic polymer that is applied by hand and formulated to clean and protect AwlGrip topcoats. Contains no harsh abrasives, will not scratch the painted surface. Leaves a non-yellowing, protective polymer coating. Lasts through multiple washings. Removes mild stains such as water spots and diesel soot.
Part No: 73240/1HGUS
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System->2-Burner Built-In Propane Ranges
Force 10’s unique, patented slide away oven door maximizes galley space. Highly corrosion-resistant 304 stainless steel is used for all structural components. Safety thermocouples at each burner stop the flow of propane seconds after the flame is extinguished. Standard infrared broilers produce great sandwiches and broiled fish. Each burner is designed to accommodate a 3/8” female flare swivel. Includes standard thermostatic control, standard clear window doors, stainless steel burner caps.
Part No: 73251
|
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System -> Stoves With Ovens->2-Burner Built-In Propane Ranges
Force 10’s unique, patented slide away oven door maximizes galley space. Highly corrosion-resistant 304 stainless steel is used for all structural components. Safety thermocouples at each burner stop the flow of propane seconds after the flame is extinguished. Standard infrared broilers produce great sandwiches and broiled fish. Each burner is designed to accommodate a 3/8” female flare swivel. Includes standard thermostatic control, standard clear window doors, stainless steel burner caps.
Part No: 73253
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass->Episize™ Glass Tape
Episize™ Glass Tape Versatile WEST SYSTEM EpisizeTM 9-oz. woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications. When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion. #729 2" wide x 10' or 50 yard rolls. #731 3" wide x 50 yard roll. #732 4" wide x 10' or 50 yard rolls.
Part No: 733
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Leather Wheel Kits
Steer more comfortably with a wheel that’s never too hot or too cold. Suede leather fits 7/8"dia. tubing. Each kit fits a range of wheel sizes<\m>simply cut the length to fit your wheel.
Part No: 733-22-30-GRAY
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Leather Wheel Kits
Steer more comfortably with a wheel that’s never too hot or too cold. Suede leather fits 7/8"dia. tubing. Each kit fits a range of wheel sizes<\m>simply cut the length to fit your wheel.
Part No: 733-22-30-TAN
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Leather Wheel Kits
Steer more comfortably with a wheel that’s never too hot or too cold. Suede leather fits 7/8"dia. tubing. Each kit fits a range of wheel sizes<\m>simply cut the length to fit your wheel.
Part No: 733-32-40-GRAY
|
|
|
|
|
Home -> Sailboat -> Sailboat Canvas->Leather Wheel Kits
Steer more comfortably with a wheel that’s never too hot or too cold. Suede leather fits 7/8"dia. tubing. Each kit fits a range of wheel sizes<\m>simply cut the length to fit your wheel.
Part No: 733-42-60-GRAY
|
|
|
|
Home -> Sailboat -> Rigging Products -> Mast Going Aloft Gear
Polished stainless with a 5/8" thick teak pad instep grooved to prevent slipping.
Part No: 7330SS
|
|
|
|
Home -> Engine Systems -> Engine Parts->NGK Spark Plugs
NGK spark plugs are designed to operate over a much wider heat range than ordinary plugs. Each NGK features high alumina ceramics for better heat transfer and electrical insulation. Patented triple gasket sealing process eliminates the possibility of combustion gas leakage.
Part No: 7331
|
|
|
|
Home -> Engine Systems -> Trim Tabs & Hydrofoils
Thrust Washer Merc 30-70hp.
Part No: 73345A1
|
|
|
