Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.

Mas Gelcoat Repair Kit, Multicolor from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.

FLAG Resin, 1/2 Gallon from MAS EPOXY
We highly recommend this resin for general purpose gluing applications where wet-out of fiberglass is not a consideration, and for all your filleting and fairing needs. FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.

Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.

Flag Epoxy Repair Kit from MAS EPOXY
For small repairs and bonding; Perfect where only a small amount is needed. Small enough to keep on board, but enough epoxy to make most quick repairs! Kit includes: 16oz. Flag Epoxy Resin. 8oz. medium hardener. 10 mixing sticks. 4pr. gloves.

1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .

1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.

1/4" Aluminum Hose Barb, 1/4" Make Thread from MOELLER
Barb-Fuel 1/4Npt x 1/4 M Thrd|Barb-Fuel 1/4Npt x 1/4 M Thrd.

Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.

Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.

4-Cup 12V Coffee Maker from WARING
Enjoy fresh coffee ashore or afloat with this 4-cup coffee maker that plugs into any 12V outlet. Features include a durable stainless-steel carafe, dripless pour spout, knuckle guard, 30-minute auto shut off, “On” indicator light, and a convenient “Brew Pause” feature that lets you pour a cup of coffee before brewing has finished. Includes coffee scoop and three filters. 10 1/4"H x 5 1/4"W x 7 5/8"D.

Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.

1/8" Single Braid, 2300lb. Breaking Strength, Green from SAMSON ROPE
The high-strength, low-stretch equivalent to wire rope with seven times less weight! Combined with flex-fatigue and service life durability, Amsteel 12-strand Dyneema SK-75 single braid can outlast wire rope and has none of the handling and safety issues associated with wire. Stretch: 0. 70% at 20% of breaking strength. Best Use: Cascade systems, replacements for wire halyards, tapered sheets, backstays, runners, checkstays and strong ultralight rigging . Construction: 12-strand single braid .