Top Sellers
Check Valve for Cartridge Pumps from WEST MARINE
Bilge Pro Pump Accessories Check valve- cartridge bilge. Dura Port Straight Kit. Dura Port 90 Degree Kit.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
|
Stainless-Steel Full-Flow Ball Valve, 1/4" Size (NPT) from GROCO
Components include 316 stainless-steel body, 304 stainless-steel handle, PTFE seals and seats.
|
3-Way Bronze Ball Valve, 1/2" Size (NPT) from APOLLO
Use in place of a "T" fitting to switch between two tanks.
|
|
|
Small Bronze Ball Valves with Brass Ball, 3/8" NPT from APOLLO
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.
|
Waste Caddy from TODD ENTERPRISES
Todd Waste Caddy A portable 29-gal. capacity waste removal system. Moves easily on pneumatic tires with plastic bearings. Features a vented cap and 10-foot, 1-1/2"dia. hose and gravity-assisted pump that forces out fluid by gravity for a more rapid transfer. Spring-loaded nozzle eliminates leaks . Bronze ball valve is located at the bottom of the tank . Constructed of cross-linked polyethylene for strength and durability .
|
Flush-Mount Water Regulator/Inlet from SHURFLO
This combination water regulator, entry screen and check valve with Shurflo’s exclusive diaphragm design provides continuous protection from pressure surges. Pressure will not exceed 50psi. For installation on bulkheads of any thickness. Made of chromed plastic. 4-3/4" x 4-3/4" x 3-3/4".
|
Full-Flow In-Line Ball Valve, 1" NPT from GROCO
These in-line ball valves permit unrestricted flow in all sizes. Each features a compact bronze body, chrome-plated brass ball with Teflon seats for long life, 304 stainless steel handle, bonding attachment screw and a drain plug.
|
|
|
Spanner Wrench from GROCO
For use with Groco strainers and deck plates with holes up to 7" apart. Cast bronze with 1/4" dia. stainless steel pins on one side and 5/16" pins on the other. Made in USA.
|
Joker Valve from GROCO
Groco Replacement Parts and Service Kits We stock an extensive selection of parts and service kits for virtually all products. In addition, we can quickly get any part you need to repair your Jabsco, SHURflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance.
|
Fuel Filter Element, GF-375 from GROCO
Groco Replacement Parts and Service Kits We stock an extensive selection of parts and service kits for virtually all products. In addition, we can quickly get any part you need to repair your Jabsco, SHURflo, Raritan or Groco equipment directly from the manufacturer through our Special Order department. If you know the part number you need simply order the part using the Model or manufacturer's part number. If you don't know either number, please call us for assistance.
|
|
1" Bronze Check Valve from GROCO, 2" Bronze Check Valve from GROCO
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Extenders
Solid and strong, the innovative Hi-MOD extender lends incredible holding power to any compression system.
Part No: CTX532
|
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Extenders
Solid and strong, the innovative Hi-MOD extender lends incredible holding power to any compression system.
Part No: CTX716
|
|
|
|
|
Home -> Cordage -> Rigging Products->Hi-MOD Compression Extenders
Solid and strong, the innovative Hi-MOD extender lends incredible holding power to any compression system.
Part No: CTX932
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers -> Refrigeration Conversion
Air-cooled Danfoss BD50F high-efficiency compressor for temperate climates. Extremely quiet running . Compressor is shrouded for maximum fan-forced cooling efficiency . Long-lasting stainless steel construction . Features make installation easy . Quick-disconnect couplings . Built-in troubleshooting diagnostics . Modular phone jack thermostat/electronics connections . Amp Draw: 4. 5A–5. 5A@12V DC while on .
Part No: CU-100
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers -> Refrigeration Conversion
Choose this unit for long cruises in tropical waters, large cooling volume requirements or unavoidable installations in the ship’s engine compartment or restricted airflow spaces. Installation requires a seawater pump, hoses and through-hull inlet and outlet fittings (Kit - Model 541086). Extremely quiet running . Compressor is shrouded for maximum fan-forced cooling efficiency . Long-lasting stainless steel construction . Modular phone jack thermostat/electronics connections . Amp Draw: 4.
Part No: CU-200
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Our most affordable ice box conversion systems! COOLMATIC Compressors have integrated, adjustable low-voltage cutout protection, quiet fan cooling and self-sealing valve couplings to make installation easy. Cooling is provided by electronically controlled Danfoss BD35F compressors with their output “fine tuned” to match the evaporators. Designed for small ice boxes up to 5 cu. In use they are quiet, efficient and require almost no maintenance. Condensing unit and evaporator can be up to 8 ft.
Part No: CU-54
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Our most affordable ice box conversion systems! COOLMATIC Compressors have integrated, adjustable low-voltage cutout protection, quiet fan cooling and self-sealing valve couplings to make installation easy. Cooling is provided by electronically controlled Danfoss BD35F compressors with their output “fine tuned” to match the evaporators. Designed for small ice boxes up to 5 cu. In use they are quiet, efficient and require almost no maintenance. Condensing unit and evaporator can be up to 8 ft.
Part No: CU-55
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers -> Refrigeration Conversion
Designed for larger boxes and use in warmer waters, the Danfoss BD35F compressor unit is tuned for higher efficiency. This configuration is suitable for ground insulation. Five evaporator styles to suit your space are available (sold separately) . Can be powered by either 12 or 24 volt systems . Amp draw is approx. 3. 5A-5. 5A@12V DC, depending on evaporator style . Dimensions: 15. 19”W (386 mm) x 5. 11”D (130 mm) x 6.
Part No: CU-84
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Designed for larger boxes and use in warmer waters, the Danfoss BD35F compressor is tuned for higher efficiency. This configuration is suitable for shelf mounting. Five evaporator styles to suit your space are available . Can be powered by either 12 or 24 volt systems . Amp draw is approx. 3. 5A-5. 5A@12V DC, depending on evaporator style . Dimensions: 8. 66”W (220 mm) x 8. 66”D (220 mm) x 6.
Part No: CU-85
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Designed for larger boxes and use in warmer waters, the Danfoss BD35F compressor is tuned for higher efficiency. This configuration is suited for floor and wall mounting. Five evaporator styles to suit your space are available . Can be powered by either 12 or 24 volt systems . Amp draw is approx. 3. 5A-5. 5A@12V DC, depending on evaporator style . Dimensions: 8. 66”W (220 mm) x 6. 97”D (177 mm) x 6.
Part No: CU-86
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Nautolex Cushion Underlining
Nautolex fabrics are proven to have 10-12 times better abrasion resistance than similar products. It is resistant to staining, abrasion, scuffing, and burnishing. With fabrics that have the PreFixx protective finish almost any stain can be cleaned off of its surface, most stains clean off with a mild cleaner, but some of the tougher stains may require stronger solvents.
Part No: CU1
|
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Nautolex Cushion Underlining
Nautolex fabrics are proven to have 10-12 times better abrasion resistance than similar products. It is resistant to staining, abrasion, scuffing, and burnishing. With fabrics that have the PreFixx protective finish almost any stain can be cleaned off of its surface, most stains clean off with a mild cleaner, but some of the tougher stains may require stronger solvents.
Part No: CU2
|
|
|
|
Home -> Fishing -> Reels -> Baitcasting Reels->Curado E Baitcasting Reel
Winner of the 2008 ICAST New Product Showcase Award for Best Freshwater Reel and Best of Show. The new 200's are smaller than 100's with the capacity of a 200. Lightweight Graphite Sideplates (Aluminum Handle Side on 300 sizes). Recessed Reel Foot. Super Free Bearing Supported Pinion Gear System (SF). A7075 Aluminum Magnumlite Spool. Dartainium Drag. 7 Bearings - 1 S A-RB BB - 5 Shielded Stainless Steel BB - 1 A-RB Roller Clutch Bearing. Variable Brake System (VBS) with Reduced Mass Hub.
Part No: CU200E5
|
|
|
|
|
Home -> Fishing -> Reels -> Baitcasting Reels->Curado E Baitcasting Reel
Winner of the 2008 ICAST New Product Showcase Award for Best Freshwater Reel and Best of Show. The new 200's are smaller than 100's with the capacity of a 200. Lightweight Graphite Sideplates (Aluminum Handle Side on 300 sizes). Recessed Reel Foot. Super Free Bearing Supported Pinion Gear System (SF). A7075 Aluminum Magnumlite Spool. Dartainium Drag. 7 Bearings - 1 S A-RB BB - 5 Shielded Stainless Steel BB - 1 A-RB Roller Clutch Bearing. Variable Brake System (VBS) with Reduced Mass Hub.
Part No: CU200E7
|
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Nautolex Cushion Underlining
Nautolex fabrics are proven to have 10-12 times better abrasion resistance than similar products. It is resistant to staining, abrasion, scuffing, and burnishing. With fabrics that have the PreFixx protective finish almost any stain can be cleaned off of its surface, most stains clean off with a mild cleaner, but some of the tougher stains may require stronger solvents.
Part No: CU3
|
|
|
|
|
Home -> Fishing -> Reels -> Baitcasting Reels->Curado E Baitcasting Reel
Winner of the 2008 ICAST New Product Showcase Award for Best Freshwater Reel and Best of Show. The new 200's are smaller than 100's with the capacity of a 200. Lightweight Graphite Sideplates (Aluminum Handle Side on 300 sizes). Recessed Reel Foot. Super Free Bearing Supported Pinion Gear System (SF). A7075 Aluminum Magnumlite Spool. Dartainium Drag. 7 Bearings - 1 S A-RB BB - 5 Shielded Stainless Steel BB - 1 A-RB Roller Clutch Bearing. Variable Brake System (VBS) with Reduced Mass Hub.
Part No: CU300E
|
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Nautolex Cushion Underlining
Nautolex fabrics are proven to have 10-12 times better abrasion resistance than similar products. It is resistant to staining, abrasion, scuffing, and burnishing. With fabrics that have the PreFixx protective finish almost any stain can be cleaned off of its surface, most stains clean off with a mild cleaner, but some of the tougher stains may require stronger solvents.
Part No: CU4
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Bora Bora Booney
Bora Hat|BORA HAT/FOSSI.
Part No: CU9745-160-O/S
|
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Bora Bora Booney
Sage Bora Bora Booney OS|Sage Bora Bora Booney OS.
Part No: CU9745-365-O/S
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Schooner Bank Cachalot
Whole-head sun protection for boatersExtra protection from the damaging sun. Save your skin and keep the sun off your face and neck with the Schooner's large visor and lightweight protective backflap. The Schooner is made of UPF 30 rated, breathable and fast drying 100% nylon Perfecta Plus(tm) fabric. It's nonstructured so it collapses, making it easy to pack. Features a terry sweatband and adjustable drawcord and toggle at back. Imported.
Part No: CU9746-160-O/S
|
|
|
|
|
Home -> Clothing Accessories -> Hats, Watches, & Accessories->Schooner Bank Cachalot
Whole-head sun protection for boatersExtra protection from the damaging sun. Save your skin and keep the sun off your face and neck with the Schooner's large visor and lightweight protective backflap. The Schooner is made of UPF 30 rated, breathable and fast drying 100% nylon Perfecta Plus(tm) fabric. It's nonstructured so it collapses, making it easy to pack. Features a terry sweatband and adjustable drawcord and toggle at back. Imported.
Part No: CU9746-365-O/S
|
|
|
|
Home -> Plumbing -> Fittings & Valves
For 1-1/2" flexible hose.
Part No: CV-1-1/2
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-100
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-125
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-150
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-200
|
|
|
|
Home -> Fishing -> Reels->Convector Trolling Reels
Okuma's Convector Series has many new upgrades and a new look. These reels feature oversized gear boxes with a new self-lubricating gear system, so the new Convectors are smooth. With the new SLG—Speed Loc Gearing System, the Convectors will stop even the fastest fish, dead in their tracks. Convectors are finished with an oversized, ergonomically-designed handle knob for all day comfort. Bearings: Two stainless steel ball bearings. Ergonomic forged aluminum handle with oversized handle knob.
Part No: CV-45C
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-50
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon In-Line Check Valves
Noncorroding nylon.
Part No: CV-74-16H16HFB
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-75
|
|
|
