Top Sellers
3-Way Bronze Ball Valve, 1/2" Size (NPT) from APOLLO
Use in place of a "T" fitting to switch between two tanks.
|
LetterU - White, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
Number 3 - Black, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
|
|
|
|
5"-6" Bonnet Set from WMH TOOL GROUP
For final buff out, use the wool polishing bonnet included in this Seven Piece Bonnet Set which includes four applicators, two terry cloth, one wool and one microfiber polishing bonnet.
|
|
|
|
|
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
|
Rejuvenate 2-Cycle Engine Oil, Pint from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
|
Rejuvenate 2-Cycle Engine Oil, Gallon from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
|
TC-W3 100% Synthetic 2-Cycle Outboard Oil from PENNZOIL
This high-flash, ashless 2-cycle engine oil with biodegradable formulation meets or exceeds 2-cycle outboard manufacturer's warranty requirements. It provides excellent lubricity and wear and rust protection in both pre-mix and injection systems. Exceeds NMMA requirements.
|
2.5 Gallon, TCW-3 Quicksilver Oil from MERCURY MARINE
This two-cycle oil far exceeds TC-W3 standards to provide superior engine protection.
|
Quart, TCW-3 Quicksilver Oil from MERCURY MARINE
This two-cycle oil far exceeds TC-W3 standards to provide superior engine protection.
|
|
|
|
1, 1-1, L-1-1, 1-3, 2-1, 3-1, 1" Pipe Size from APOLLO, 1-5, L-1", Dia 1, Two 1
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,060
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,148
1,149
1,150
1,151
1,152
1,153
1,154
1,155
1,156
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,180
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 778
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Excellent for priming clean, lightly rusted or previously painted metal. Bonds tightly to metal to provide superb adhesion for finishes. Easy to cover with any topcoat color. 12oz.
Part No: 7780830
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
For use on aluminum and galvanized steel surfaces above or below the waterline, this primer chemically etches into aluminum and galvanized steel and forms a corrosion-resistant bondable surface for top coat adhesion. 12oz.
Part No: 7785830
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets
The 50A shorepower systems are offered in 125V, 3-conductor pole, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure you order matching components, as they are not interchangeable (except covers). Yellow Lexan® with waterproof lid. Fits receptacles # 379404, 125/250V and # 410456, 125V.
Part No: 7788CR
|
|
|
|
.
Part No: 77920OF
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 779A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Machine Bolts, Hex Head, Bulk Packs
Type 18-8 stainless steel.
Part No: 77B
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> North & Central America->Great Lakes Region
Printed on both sides, these charts save you money! And because they are printed on synthetic paper, they are impervious to water, fresh or salt, so you can use them on deck in rain or spray. Convenient size—25"H x 38"W—makes them easy to fold and store. Used by the Coast Guard and the Navy, these charts are updated regularly and include Loran and GPS coordinates on most charts. Special editions for fishing and diving . Exact positions for wrecks and reefs .
Part No: 78
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-01
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-02
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-03
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-05
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-07
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Full-Port Flanged Bronze Seacocks
All-bronze bodies with chrome-plated bronze balls and stainless-steel levers and nuts. Glass-reinforced Teflon seats and seals. Top fitting is NPT (tapered thread) and bottom is NPS (straight thread). Marine UL-listed.
Part No: 78-115-01F
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Full-Port Flanged Bronze Seacocks
All-bronze bodies with chrome-plated bronze balls and stainless-steel levers and nuts. Glass-reinforced Teflon seats and seals. Top fitting is NPT (tapered thread) and bottom is NPS (straight thread). Marine UL-listed.
Part No: 78-116-01F
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Full-Port Flanged Bronze Seacocks
All-bronze bodies with chrome-plated bronze balls and stainless-steel levers and nuts. Glass-reinforced Teflon seats and seals. Top fitting is NPT (tapered thread) and bottom is NPS (straight thread). Marine UL-listed.
Part No: 78-118-01
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.->Full-Port Flanged Bronze Seacocks
All-bronze bodies with chrome-plated bronze balls and stainless-steel levers and nuts. Glass-reinforced Teflon seats and seals. Top fitting is NPT (tapered thread) and bottom is NPS (straight thread). Marine UL-listed.
Part No: 78-119-01
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Full-Port Flanged Bronze Seacocks
All-bronze bodies with chrome-plated bronze balls and stainless-steel levers and nuts. Glass-reinforced Teflon seats and seals. Top fitting is NPT (tapered thread) and bottom is NPS (straight thread). Marine UL-listed.
Part No: 78-120-01
|
|
|
|
Home -> Sailboat -> Rigging Products -> Rigging Terminals
Schaefer Pad-Eye Cast Investment cast pad eye with round base. Safe Working load 12000 lbs. . Backing plate #97-54. . Shipping Weight: 0. 40 pounds . Length: 3". Width: 3". Eye Width: 1 1/8". Eye Height: 7/8".
Part No: 78-17
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Bronze Ball Valves for Fuel Shut Off
Cast bronze with stainless lever and nut. Ball valve is polished chrome over brass. Glass-reinforced Teflon seats and seals. Operates smoothly. Fast 90° on/off turn.
Part No: 78-248-10
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-25
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Bronze Ball Valves for Fuel Shut Off
Cast bronze with stainless lever and nut. Ball valve is polished chrome over brass. Glass-reinforced Teflon seats and seals. Operates smoothly. Fast 90° on/off turn.
Part No: 78-250-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Bronze Ball Valves for Fuel Shut Off
Cast bronze with stainless lever and nut. Ball valve is polished chrome over brass. Glass-reinforced Teflon seats and seals. Operates smoothly. Fast 90° on/off turn.
Part No: 78-256-10
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-26
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Eye Straps
Eye straps are convenient for lashing points and attaching control line leads or blocks.
Part No: 78-31
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stamped Stainless Eyestraps
1-3/4"L x 5/16"W Eye Strap, 1/2" Fairlead Width, 1-5/16" Hole Centers, Two #10 RHMS Fasteners.
Part No: 78-32
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Eye Straps
Eye straps are convenient for lashing points and attaching control line leads or blocks.
Part No: 78-33
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Eye Straps
Eye straps are convenient for lashing points and attaching control line leads or blocks.
Part No: 78-34
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Bronze Ball Valves for Fuel Shut Off
Cast bronze with stainless lever and nut. Ball valve is polished chrome over brass. Glass-reinforced Teflon seats and seals. Operates smoothly. Fast 90° on/off turn.
Part No: 78-438-10
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails
Stanchion mount lined fairlead for furling line.
Part No: 78-53
|
|
|
