Top Sellers
Red/Green (for port, starboard and bi-color nav. lights) from DR. LED
Aqua Signal series 25 navigation lights LED replacement bulbs. 2nm brightness. Base Type: Gold plated dimpled festoon. *Click here for the Dr.
|
Bottom Support Pole Caps, Non-skid from DR. SHRINK
Bottom Support Pole Caps Dr. Shrink carries a full line of premium installation supplies to ensure a professional shrinkwrap job from start to finish.
|
Shrinkwrap Tape, 4" x 180', Blue from DR. SHRINK
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
|
Shrink Tape, 2" x 180', Blue from DR. SHRINK
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
|
Shrink Wrap System Hardware Kit from DR. SHRINK
Protect your boat from rain, snow, UV damage, airborne debris and pests during winter storage During long periods of storage, your uncovered boat is susceptible to damage from a number of sources–rain, snow, blowing dirt and debris, bird droppings, UV radiation and nesting birds and rodents. ”Wrap-It-Up“ is a do-it-yourself shrink-wrap system that provides your boat with the protection it deserves during the long off-season. Buy it once and reuse it year after year. Buy a new kit every year.
|
|
|
|
|
Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.
|
LED Instrument Pod Cockpit Light from LEWMAR
Lamp Pod, 10-33v LED Available factory fitted to pod or as optional accessory. 10-33 volt DC power required .
|
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .
|
3/16" AmSteel-Blue Rope, Red from SAMSON ROPE
AmSteel-Blue is a 12-strand braided rope utilizing Parallay design with our proprietary blue Samthane coating with Dyneema® SK-75 fiber. This rope yields the maximum in strength-to-weight ratio and is stronger than wire rope constructions—yet it floats. Superior flex, fatigue and wear resistance. Stronger than AmSteel. Much stronger than steel. Very low stretch. Easily spliced. Superior flex.
|
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
|
Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
|
|
|
LED, LED Bulb, Blue from DR, Red from DR, Green from DR, Spreader Light from DR
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,154
1,155
1,156
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,182
1,183
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Electrical -> Interior Lighting -> Led Interior Lights->Mars Dome Cabin Lights
General purpose, surface-mount light fixture produces a warm, dual-level white light, or red/white light for night use, with very low power draw (red: 1W, white 1W/3W). U. S. -made high-flux LED provides high lumen-per-watt light, outperforming other, similar sized LED lights. 12 or 24V (operates between 8-30VDC). Bulb Wattage: White/Red and Dual White Hi level: equivalent to 45W incandescent; Low level: equivalent to 33W incandescent (total power consumption: 3W / 1W depending on selection) .
Part No: 8001184
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories->Stream Machine Water Launchers
Just add water and let the fun begin! Designed for speedy reloading and distance they shoot up to 70' these water cannons are made of a strong, durable polymer with colors that won’t chip or peel off. At 12"L, the TL-600 is the perfect size for younger members of the family.
Part No: 80012
|
|
|
|
Because they produce only a small amount of heat, these highflux bulbs make ideal replacements for most “third degree burn” halogen reading, map and cockpit lights with bi-pin and bayonetstyle bases. Light is soothing and warm with cutting edge internal circuitry and high-quality U. Power consumption is just 1W (less than 0. 08A!) except for three-watt Model 9980111. For forward pointing reading fixtures only. Application: Works with most MR11 fixtures . Amps: 0. 08A (Model 9980111 draws 0.
Part No: 8001238
|
|
|
|
For forward pointing reading fixtures only. G4 bayonet15 (BAY15), MR11, MR16 LED replacement bulbs. Specially designed to replace most "third degree burn" small bi-pin hot halogen and bayonet (single contact, double contact, non-index, indexed) bulbs. Cutting edge internal circuitry and high-quality components for long service life and shock resistance. Ideal for cockpit, map reading lights.
Part No: 8001245
|
|
|
|
|
For forward pointing reading fixtures only. G4 bayonet15 (BAY15), MR11, MR16 LED replacement bulbs. Specially designed to replace most "third degree burn" small bi-pin hot halogen and bayonet (single contact, double contact, non-index, indexed) bulbs. Cutting edge internal circuitry and high-quality components for long service life and shock resistance. Ideal for cockpit, map reading lights.
Part No: 8001252
|
|
|
|
|
For forward pointing reading fixtures only. G4 bayonet15 (BAY15), MR11, MR16 LED replacement bulbs. Specially designed to replace most "third degree burn" small bi-pin hot halogen and bayonet (single contact, double contact, non-index, indexed) bulbs. Cutting edge internal circuitry and high-quality components for long service life and shock resistance. Ideal for cockpit, map reading lights.
Part No: 8001269
|
|
|
|
Medium screw-base (Edison E26/E27) LED bulbs offer an energy-saving solution to incandescent lighting. Soothing warm white light. Offer low power draw and ultra-long service life: 50,000 hours. Impact and shock resistant. 8-18V DC. . U. S. made high flux LED. *Click here for the Dr.
Part No: 8001276
|
|
|
|
|
Medium screw-base (Edison E26/E27) LED bulbs offer an energy-saving solution to incandescent lighting. Soothing warm white light. Offer low power draw and ultra-long service life: 50,000 hours. Impact and shock resistant. 8-18V DC. . U. S.
Part No: 8001283
|
|
|
|
|
For forward pointing reading fixtures only. G4 bayonet15 (BAY15), MR11, MR16 LED replacement bulbs. Specially designed to replace most "third degree burn" small bi-pin hot halogen and bayonet (single contact, double contact, non-index, indexed) bulbs. Cutting edge internal circuitry and high-quality components for long service life and shock resistance. Ideal for cockpit, map reading lights.
Part No: 8001290
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
High-flux LED spot/spreader light. US-made high-flux LED provides high lumen-per-watt light, outperforming other LED lights. Designed to be mounted up to 20' above deck. Low current draw 12V @ ~1. 2A or at 24V @ ~0. 6A. Diecast aluminum housing provides ample heat sinking to the LEDs to ensure long life operation. Marine-grade white powder-coated finish. Ultra-long life. Highly shock and vibration resistant. *Click here for the Dr.
Part No: 8001344
|
|
|
|
|
Because they produce only a small amount of heat, these highflux bulbs make ideal replacements for most “third degree burn” halogen reading, map and cockpit lights with bi-pin and bayonetstyle bases. Light is soothing and warm with cutting edge internal circuitry and high-quality U. Power consumption is just 1W (less than 0. 08A!) except for three-watt Model 9980111. For forward pointing reading fixtures only. Application: Works with most MR11 fixtures . Amps: 0. 08A (Model 9980111 draws 0.
Part No: 8001399
|
|
|
|
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Gold-plated corrosion-free bayonet-type bases. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Consumes only 1W.
Part No: 8001436
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Light Acc.->Polar Star 40 LED Replacement Bulbs
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Consumes only 1W. A great way to reduce energy consumption aboard. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Application: Replacement bulbs for most 2nm navigation lights . Amps: 0. 1A . Watts: 1W .
Part No: 8001450
|
|
|
|
Home -> Electrical -> Flashlights & Batteries
State-of-the-art three watt US made high-flux LEDs provide the most lumen per watt in LED technology. Construction is beautifully machined aluminum with a tough gray anodized surface. We guarantee that you will love this flashlight as much as you love your favorite Leatherman tool, or Myerchin rigging knife, or Makita driver-drill. We do recommend that you carry an extra set of batteries, however, since you'll be tempted to show it off so often that you'll need a refill set before you know it.
Part No: 8001467
|
|
|
|
|
Home -> Electrical -> Interior Lighting -> Led Interior Lights->Mars Dome Cabin Lights
General purpose, surface-mount light fixture produces a warm, dual-level white light, or red/white light for night use, with very low power draw (red: 1W, white 1W/3W). U. S. -made high-flux LED provides high lumen-per-watt light, outperforming other, similar sized LED lights. 12 or 24V (operates between 8-30VDC). Bulb Wattage: White/Red and Dual White Hi level: equivalent to 45W incandescent; Low level: equivalent to 33W incandescent (total power consumption: 3W / 1W depending on selection) .
Part No: 8001504
|
|
|
|
|
Home -> Electrical -> Interior Lighting -> Led Interior Lights->Mars Dome Cabin Lights
General purpose, surface-mount light fixture produces a warm, dual-level white light, or red/white light for night use, with very low power draw (red: 1W, white 1W/3W). U. S. -made high-flux LED provides high lumen-per-watt light, outperforming other, similar sized LED lights. 12 or 24V (operates between 8-30VDC). Bulb Wattage: White/Red and Dual White Hi level: equivalent to 45W incandescent; Low level: equivalent to 33W incandescent (total power consumption: 3W / 1W depending on selection) .
Part No: 8001528
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Light Acc.->Polar Star 40 LED Replacement Bulbs
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Consumes only 1W. A great way to reduce energy consumption aboard. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Application: Replacement bulbs for most 2nm navigation lights . Amps: 0. 1A . Watts: 1W .
Part No: 8001542
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Neptune™ Thru-Hull Underwater LED Lights
The 500+ lumen Neptune Light outperforms any other LED light in the same category in terms of price and light output. Three US-made high-flux LEDs provide the highest lumen-per-watt (three total watts) underwater light. Aerospace-grade anodized aluminum composite body. No anodes required. Multi-voltage 12/24V DC.
Part No: 8001597
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Neptune™ Thru-Hull Underwater LED Lights
The 500+ lumen Neptune Light outperforms any other LED light in the same category in terms of price and light output. Three US-made high-flux LEDs provide the highest lumen-per-watt (three total watts) underwater light. Aerospace-grade anodized aluminum composite body. No anodes required. Multi-voltage 12/24V DC.
Part No: 8001603
|
|
|
|
Home -> Electrical -> Interior Lighting -> Led Interior Lights->3" High-Flux Waterproof LED Recessed Lights
These waterproof fixtures produce a warm white light with the latest high-flux LED technology to assure long life. Patented internal circuitry provides consistent brightness and makes them immune to life-shortening voltage fluctuations. Spot is equivalent to a 60W incandescent beam, bright enough for reading; flood is equivalent to a 20W incandescent beam, great for ambient light. White and chrome trim rings are included. Optional brass and spare chrome trims available. 07" (27mm) D.
Part No: 8001641
|
|
|
|
|
Home -> Electrical -> Interior Lighting -> Led Interior Lights->3" High-Flux Waterproof LED Recessed Lights
These waterproof fixtures produce a warm white light with the latest high-flux LED technology to assure long life. Patented internal circuitry provides consistent brightness and makes them immune to life-shortening voltage fluctuations. Spot is equivalent to a 60W incandescent beam, bright enough for reading; flood is equivalent to a 20W incandescent beam, great for ambient light. White and chrome trim rings are included. Optional brass and spare chrome trims available. 07" (27mm) D.
Part No: 8001658
|
|
|
|
Home -> Electrical -> Interior Lighting
World’s first and only bi-color (red/white) energy efficient high-flux LED chart and reading light with ultra-low current draw and European style. On/Off/On switch located at the base to select either warm white or red light output. Highly shock and vibration resistant. Light Style: Chart Light . Voltage/Draw: 12V/0. 15A . Bulb Wattage: Less than 2W . Fixture Material: Anodized aluminum head and base, coated steel gooseneck . Fixture Dimensions: 1. 24"dia. head, 3.
Part No: 8001665
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Underwaterlights
Low-profile surface-mounted high-flux LED puck light is equally at home under water or on the bottom of a spreader. Latest high-flux LED technology provides high lumen-per-watt light, outperforming other underwater LED lights. Aluminum housing provides ample heat sinking to the LEDs to ensure long life operation. 1M long lead provided. Ultra-long life. Highly shock and vibration resistant. 4"dia. (100mm) x 1. 22"H (31mm). Draws approx. 1A @12V DC; 0.
Part No: 8001672
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Neptune™ Thru-Hull Underwater LED Lights
The 500+ lumen Neptune Light outperforms any other LED light in the same category in terms of price and light output. Three US-made high-flux LEDs provide the highest lumen-per-watt (three total watts) underwater light. Aerospace-grade anodized aluminum composite body. No anodes required. Multi-voltage 12/24V DC.
Part No: 8001689
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Marine AC 80 - Pure Epoxy, (Commercial/Industrial Only)
Marine AC 80 - Pure Epoxy - Commercial/Industrial Only A surface tolerant, two part 80% solids pure epoxy anticorrosive primer. Epoxy anticorrosive coating for use on the entire vessel: Underwater, topside, deck, house, water ballast tank, cofferdam, voids, cargo holds and internal spaces. High solids epoxy. Specifically designed for Steel and for (select styles) aluminum ships.
Part No: 8001K
|
|
|
|
Home -> Plumbing -> Marine Sanitation
The ultimate racer’s toilet—competitors are actually removing their heavy, permanently installed toilets and using this in its place. It’s a rotomolded polyethylene seat that press fits securely to any 3- or 5-gallon bucket. Simply line the bucket with a plastic trash bag to allow waste disposal and storage. Of course, you must still follow all sanitary regulations. Extremely light, portable and great for small boats. Round rotomolded polyethylene seat press fits to any 3gal.
Part No: 8002-01W
|
|
|
|
Home -> Plumbing -> Fittings & Valves
rubber valve mounts above the waterline, but below cockpit drain level on the transom.
Part No: 80021
|
|
|
|
Home -> Electrical -> Meters & Distribution->Voltmeters
Voltmeters give a “status report” on how charged your batteries are, especially when batteries have been idle for a few days or so. DC Voltmeter measures DC voltage from 8-16 volts and is accurate to ±3%. Simple two-wire hookup. Display measures 2-1/2"square and requires a 2-1/16" mounting hole. AC Voltmeter measures AC voltage up to 150 volts and is accurate to ±3%. Simple two-wire hookup. Display: 2. 5" square. Cutout: 2-1/16". Functions: Voltmeter .
Part No: 8003
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Coal Tar Expoxy Primer (Commercial/Industrial Only)
Two-pack epoxy coal tar polyamide primer. Meets the Corps of Engineers C-200 Specifications. Highly resistant to water, chemicals, abrasion and corrosion.
Part No: 8003-5GB
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Marine Coal Tar Expoxy Primer (Commercial/Industrial Only)
Two-pack epoxy coal tar polyamide primer. Meets the Corps of Engineers C-200 Specifications. Highly resistant to water, chemicals, abrasion and corrosion.
Part No: 8003K
|
|
|
